Parts for Lg LRFOC2606S/00: Ice Maker & Ice Bin Parts

This rear door handle replaces the damaged or worn handle on compatible LG appliances, restoring a secure grip and proper door operation. Durable molded construction matches factory fit for a clean, factory-original appearance. What it does

• Replaces a cracked, loose, or broken rear door handle to restore safe door gripping and operation
• Provides the mounting surface and attachment points used by the factory rear handle assembly
• Helps eliminate rattling or misalignment caused by a damaged handle
• Fits where the original rear handle attaches to the appliance door frame

• One rear handle

• Basic hand tools required; remove power and follow factory service manual for safe disassembly
• Keep fasteners and clips in order; replace any damaged hardware with OEM parts
• Handle mounting faces the interior rear of the door—verify orientation before tightening

The Leveling Leg is an OEM part for LG refrigerators. It is one of the four legs at the bottom corners that elevate and provide stability to the entire appliance.

Causes of failure can be broken mounting points that no longer provide secure elevation, full compression of the built-in cushioning, or damage from impact on an unlevel floor.

Symptoms of a faulty leveling leg include:

• Excessive shaking or vibrating of the refrigerator
• Door alignment issues where doors are difficult to open or close fully
• Visible leaning or misalignment of the refrigerator cabinet

This OEM LG part is also compatible with some Kenmore models.

This replacement freezer tray restores a damaged or missing internal tray to keep frozen items organized and contained. Fits into the freezer compartment to help prevent spills and support packaged food. What it does:

• Holds frozen food and packages in the freezer compartment
• Prevents spills and helps contain leaks from thawing items
• Replaces cracked, warped, or missing trays that no longer sit securely
• Helps maintain an orderly storage area for easier access to frozen items

• Disconnect power or unplug the appliance before servicing
• Slide the tray into the correct freezer slot; do not force into place
• Inspect mounting grooves or supports and clean before installing
• Handle edges carefully to avoid damage; use manufacturer screws/clips if required

A small protective cap that covers and protects a component connection or opening from dirt and moisture, helping maintain proper function and prolong component life. Simple replacement when the original cap is cracked, missing, or worn. What it does:

• Covers exposed fittings, terminals, or openings to keep out debris and moisture
• Helps prevent leaks or contamination at the sealed connection
• Restores a secure fit when the original cap is cracked, split, or degraded
• Commonly used where a small, removable protective seal is required

• Inspect mating surface and surrounding gasket/seal before installing; replace other damaged parts as needed
• Press the cap firmly into place until fully seated; no special tools usually required
• Wear gloves and disconnect power or water supply if working near energized or pressurized components

This drum roller replaces a worn support wheel that helps the dryer drum spin smoothly, reducing noise and preventing drum wobble. Restores quieter operation and proper drum alignment. What it does:

• Supports the dryer drum so it rotates evenly during a cycle
• Reduces squealing, scraping, or grinding noises from the drum area
• Helps stop drum wobble and uneven spinning that can cause wear
• Can reduce rubbing or burning smells caused by a seized or worn roller

• Disconnect power before starting any repairs; electric shock hazard.
• Typically accessed by removing the dryer front panel and drum—use care to support the drum.
• Inspect adjoining idler, belt, and rear rollers when replacing for complete repair.

This drawer tray assembly replaces a cracked, stained, or warped crisper/drawer pan to restore storage and containment in your refrigerator's lower drawer. It provides a stable, easy-to-clean surface for fruits and vegetables. What it does

• Supports produce and other drawer contents; keeps items off the drawer floor
• Contains spills and prevents moisture from reaching the cabinet below
• Replaces damaged, cracked, or warped trays that no longer seal or sit level
• Helps restore proper drawer alignment and sliding when the tray is integral to the drawer assembly

• One drawer tray assembly

• Remove all food and drawers before beginning; work on a clean, flat surface
• Disconnect power or follow appliance safety recommendations when accessing internal components
• Handle edges and mounting clips gently to avoid breaking tabs during removal/installation
• Secure all clips; test drawer movement before returning contents

This supporter cover is a replacement internal bracket that helps secure the TV's back or front cover, restoring proper panel alignment and reducing movement. Fits where the cover needs a mounting or support point to sit flush and stable. What it does

• Provides structural support to the TV cover or bezel so panels align correctly.
• Prevents cover flexing or sagging that can cause gaps or rubbing.
• Helps stop rattling or vibration-related noise caused by loose cover panels.
• Restores proper mounting points for screws or clips that hold the cover in place.

• One supporter cover.

• Unplug the TV and place it on a soft, flat surface before beginning.
• Remove the external cover or bezel per the service manual to access the mounting location.
• Keep track of screws/clips; use the same hardware unless replacement is specified.

This refrigerator crisper cover assembly replaces the shelf/cover over the vegetable drawer. It restores sturdy support and proper alignment so the produce bin sits and slides correctly when the original cover is cracked, warped, or damaged.

• Supports and covers the vegetable crisper bin to create the shelf surface above
• Provides the integrated tracks/mounts the drawer slides on
• Helps keep the compartment organized and properly spaced
• Replace when cracked, warped, or when tabs/rails break and the drawer sags, binds, or won't slide smoothly

• Disconnect power and clear the shelf area before starting
• Remove the crisper drawers to access the cover
• Lift out the damaged cover; transfer any reusable pieces from the original if required by your model
• Set the new assembly in place and reinstall the drawers, ensuring it sits level and engages the side supports

This guide rail is a direct-fit replacement that helps a refrigerator drawer slide smoothly and stay aligned for reliable opening and closing. It restores proper drawer support and reduces sticking or uneven movement. What it does

• Guides and supports the refrigerator drawer so it slides in and out smoothly.
• Replaces a worn, bent, or broken rail that causes the drawer to bind or jam.
• Reduces rattling, scraping, or uneven drawer travel.
• Restores proper drawer alignment and load support for normal operation.

• One guide rail.

• Remove all items from the drawer and pull the drawer out to access the rail before starting.
• Use basic hand tools; retain screws and hardware unless replacements are specified elsewhere.
• If the rail is clipped or latched, note latch positions for proper reinstallation.
• Disconnect power only if working near electrical components or lighting; follow appliance safety precautions.

This rail guide helps support and guide the appliance rack, allowing smooth in-and-out movement and stable operation. Replaces worn or damaged guides to restore proper rack alignment and reduce sticking or noisy sliding. What it does:

• Guides the rack along its track for smooth, controlled motion
• Keeps the rack aligned to prevent tipping or binding
• Reduces grinding, squeaking, or catching when opening or closing the rack
• Supports proper load distribution to help protect rack and cabinet finishes

• Verify correct side and orientation before installation; compare part to the original
• Remove rack and any obstructing components
• Use basic hand tools; avoid forcing components to prevent damage
• Disconnect power (and water for dishwashers) before servicing; follow all safety precautions

This ferrite magnet is a replacement magnetic element used in compatible appliance assemblies to help secure components and maintain proper alignment. It restores magnetic retention and reduces shifting or misalignment during operation. What it does:

• Provides magnetic retention for panels, assemblies or components that rely on ferrite magnets
• Helps maintain proper alignment and secure closure where magnets are used
• Can reduce noise and vibration related to loose magnetic components
• Useful when a brittle, cracked or weak magnet no longer holds parts in place

• Disconnect power and follow the appliance manufacturer's safety instructions before servicing
• Handle the magnet carefully; ferrite material is brittle and can chip or shatter if dropped or struck
• Keep magnets away from sensitive electronics and credit cards; avoid pinching fingers between strong magnets
• If the original magnet is bonded or embedded, some adhesive or light trim may be needed for proper fit.

This freezer door foam assembly replaces the insulation inside a freezer door to restore proper thermal barrier and help maintain consistent internal temperatures. It's a direct-fit internal foam piece for the door cavity. What it does:

• Replaces damaged or compressed door insulation to reduce cold air loss
• Helps prevent frost buildup and reduces uneven cooling in the freezer compartment
• Restores proper door closure performance when worn foam causes poor sealing
• Contributes to improved energy efficiency by restoring the door's thermal barrier

• One freezer door foam assembly

• Disconnect power to the appliance before beginning any repair
• Access requires removing the freezer door inner panel; follow OEM disassembly steps
• Handle foam carefully; use non-marring tools and avoid tearing the insulation
• After reassembly, check door alignment and seal for proper closure; monitor temperatures after first run

The Freezer Door Gasket is an OEM replacement part for LG refrigerators. It is designed to create a tight seal around the freezer door, helping to maintain the internal temperature by preventing cold air from escaping and warm air from entering. This ensures the freezer operates efficiently and keeps food frozen at the proper temperature.

Over time, freezer door gaskets can wear out or become damaged due to repeated opening and closing, exposure to cold temperatures, or the buildup of dirt and debris. A faulty gasket can lead to temperature fluctuations and increased energy consumption.

Symptoms of a bad freezer door gasket include:

• Frost buildup inside the freezer
• The door not sealing properly
• Increased energy use
• Food not staying properly frozen

This OEM LG part is also compatible with Sears/Kenmore models.

This genuine replacement door stopper cushions and controls a hinged appliance door to prevent slamming and keep the door aligned for smooth opening and closing. Restores proper door motion and reduces stress on the hinge and seals. What it does:

• Acts as a buffer between the door and cabinet, slowing and softening door movement
• Helps keep the door properly aligned to improve sealing and reduce wear on hinges
• Commonly replaces worn or broken stoppers that cause the door to slam, stick, or hang unevenly
• Designed to match the original fit and mounting points for straightforward replacement

• One door stopper

• Disconnect power and/or empty the appliance door area before starting work
• Use basic hand tools; remove fasteners or trim as needed to access the stopper
• Compare the new stopper to the old part for orientation before installing
• Test door operation after installation and re-tighten any fasteners if needed

This decorative handle trim restores the finished look and provides a gripping surface for the appliance door. It replaces damaged or worn trim so the door looks and functions like new. What it does:

• Covers the door edge and provides a finished, easy-to-grip surface
• Replaces cracked, chipped, or cosmetically damaged handle trim
• Helps secure the user-facing handle area and maintains appearance
• Fits where the original decorative trim has separated or worn

• Follow the appliance manufacturer's instructions and disconnect power if the repair requires removing panels near electrical components
• Use basic hand tools (screwdriver, trim tool) as needed; avoid forcing parts to prevent damage
• Keep fasteners and mounting clips organized for reassembly

This decor handle is a replacement decorative door handle that restores the look and grip of your appliance door. It matches OEM styling and provides a secure handhold for opening and closing the door. What it does

• Replaces a worn, cracked, or scratched door handle to restore appearance and function
• Provides a comfortable grip for opening and closing the appliance door
• Helps prevent further damage from using a broken or loose handle
• Fits where the original decor-style handle was used

• Installation requires removing the appliance door trim or access panel; keep small screws and clips organized.
• Use basic hand tools (screwdriver, nut driver); avoid over-tightening fasteners to prevent cracking the handle.
• Disconnect power to the appliance and follow manufacturer service instructions before working near electrical components.
• Reuse the original screws and clips or order the specific fasteners for your model.

Restore a secure, comfortable grip with this freezer door handle assembly. It replaces a broken or loose handle so you can open and close the freezer smoothly and keep your appliance looking and functioning as intended.

• Provides a sturdy handhold for opening and closing the freezer door/drawer
• Attaches to the factory mounting points for proper alignment and leverage
• Helps resolve issues like a cracked, wobbly, or missing handle
• Aids when the handle won't stay attached or the freezer is harder to open

• Wear work gloves and protect the door finish while working.
• Remove the old handle and any decorative caps/fasteners; retain reusable hardware specific to your model.
• Position the new handle on the existing mounts and tighten the fasteners evenly—do not overtighten.
• Verify a secure fit and smooth door/drawer operation after installation.

The Gasket Assembly Door is an OEM part for LG refrigerators. This gasket forms a seal around the refrigerator door, preventing warm air from entering and cool air from escaping, thus maintaining optimal temperature inside the refrigerator.

Causes of a bad gasket assembly can include wear and tear over time, damage from frequent opening and closing of the door, or degradation from exposure to various elements. A compromised gasket can lead to inefficiency in the refrigerator's cooling performance.

Symptoms of a bad gasket assembly include:

• Warm air entering the refrigerator
• Increased energy consumption
• Frost buildup inside the refrigerator
• The door not sealing properly or being difficult to close

This OEM LG part is also compatible with Sears/Kenmore models.

The Door Gasket Assembly is an OEM replacement part for LG refrigerators. This part seals the door and maintains a thermal barrier. Proper compression provides energy efficiency.

Causes of a faulty gasket assembly may involve deterioration as adhesive softens from repeated compression. Mineral deposits accumulated over extended use could also harden material reducing flexibility.

Symptoms of a problematic gasket include:

• Cool air felt leaking from the door
• Moisture visible on seal interface areas
• Temperature fluctuations

This part is also compatible with some Kenmore refrigerator models.

The French Door Mullion is an OEM part for LG refrigerators. It is a flap located between the two doors of a French door refrigerator, helping to seal the gap and maintain the internal temperature by preventing warm air from entering when the doors are closed. This component is crucial for energy efficiency and proper functioning of the refrigerator.

Over time, the mullion can wear out or become damaged due to frequent use, impact from door closures, or issues with the hinge mechanism. Causes of a bad French door mullion include wear and tear, physical damage, or a faulty hinge that causes misalignment.

Symptoms of a bad French door mullion include:

• The mullion not folding or unfolding correctly
• Visible cracks or damage to the mullion
• Warm air entering the refrigerator, affecting cooling
• Increased energy consumption

This OEM LG part is also compatible with Sears/Kenmore models.

This drawer guide supports smooth opening and closing of a refrigerator or freezer drawer, restoring proper alignment and preventing binding. It helps the drawer track and glide reliably for consistent operation and easier access to contents. What it does:

• Replaces a worn, bent, or broken drawer guide to stop drawers from sticking or coming off the track
• Restores correct drawer alignment so the drawer opens and closes evenly
• Helps reduce noise and rubbing caused by damaged guide components
• Supports normal drawer weight for safe, stable operation

• One drawer guide (right side)

• Disconnect power to the appliance before beginning any repairs and remove stored items from the drawer
• Inspect mating slides and fasteners; replace any damaged components for best results
• Typical installation uses existing screws or clips—keep original hardware unless damaged

This refrigerator door basket assembly replaces a cracked or missing door bin to restore secure storage for bottles, jars, and condiments. It mounts to the door liner to keep items organized and easy to reach. What it does:

• Attaches to the door liner to provide shelf-style storage
• Restores lost capacity and organization when a bin is broken or missing
• Helps keep beverages and condiments stable during door movement
• Common symptoms: cracked plastic, broken locking tabs, bin won't stay seated, items falling, door interference

• 1 door basket assembly

• Unplug the refrigerator and remove items from the affected bin area
• Lift the old bin straight up to disengage the tabs, then pull it out
• Align the new bin with the door liner mounts and press down until fully seated
• Verify the door closes freely and avoid overloading the new bin

The Basket Assembly is an OEM component specifically designed for LG Door-in-Door refrigerators containing bottom-mounted crisper drawers. This integral assembly organizes stored items within the refrigerator doorway.

Symptoms of a bad basket assembly include:

• Cracked or broken perforated shelves  
• Detached mounting brackets failing to secure basket
• Warped contours no longer fitting base compartment
• Missing attachments inhibiting proper installation

Causes of failure involve stresses from repeated loading/unloading cycles, mineral buildup weakening plastic brackets over time, or impact damage compromising structural integrity.

Replace yours today with this genuine OEM LG assembly to maintain tidy organizational capacity. Precision slots provide adjustable shelf positioning optimized for produce, snacks, and beverages. Compatible across Samsung, Frigidaire, and GE models featuring removable door crisper baskets.

This replacement door basket restores secure, organized storage on your refrigerator door. It holds bottles, jars, and condiments on the inner door to keep items upright and reduce spills when opening and closing.

• Mounts onto the door liner rails/slots to provide on-door storage
• Keeps contents upright during door movement to help prevent tipping
• Helps address issues such as a cracked or missing bin, a basket that won't stay seated, or items falling from a damaged bin

• Remove contents and lift the old basket straight up and out of the door liner channels
• Align the new basket with the mounting tabs/slots and press down until fully seated and secure
• Verify the door closes freely, then reload contents; avoid overloading the bin
• Handle rigid plastic carefully; allow cold parts to warm to room temperature to reduce risk of cracking

This door stopper assembly mounts at the hinge to control how far the door opens and promote smooth, consistent closing. Replacing a worn or broken stopper restores proper door swing and helps protect the hinge from overextension.

• Limits the door's opening range to prevent overextension
• Guides and cushions door movement for a smoother close
• Helps maintain door alignment at the hinge area
• Common symptoms: door swings too far, doesn't stop at the usual angle, clicks/binds near the hinge, or visible cracks/wear on the stopper

• Disconnect power to the appliance before servicing
• Support the door and use a helper when loosening hinge hardware
• Note the original orientation and transfer any spacers/shims if present
• Tighten fasteners evenly and verify smooth door operation before finalizing reassembly

This center hinge assembly supports and pivots the middle door on compatible refrigerators, restoring proper door alignment and sealing for reliable operation. Replace a worn or damaged hinge to stop sagging or misalignment and improve door motion. What it does

• Provides the pivot point and structural support for the refrigerator's center/middle door
• Helps maintain proper door alignment and a tight seal to prevent cooling loss
• Stops or reduces door sag, binding, rubbing, or uneven closing
• Reduces squeaks or rough door movement caused by worn hinge components

• Disconnect power to the appliance before starting any repairs.
• Remove food and any items from the door(s) being worked on to reduce weight and risk of damage.
• Support the door while removing and installing the hinge to prevent dropping or misalignment.
• Use basic hand tools; follow manufacturer service instructions for torque and adjustment steps.

This bushing is a replacement shaft support that stabilizes a rotating assembly and helps reduce wear and noise. It restores smooth movement and helps maintain proper alignment for the appliance component. What it does

• Supports and centers a rotating shaft or drum to reduce wobble and rubbing
• Reduces noise and friction from worn pivot or support points
• Helps prevent uneven wear on mating parts and prolongs assembly life
• Commonly replaced when you hear squeaking, grinding, or notice excessive play

• One bushing

• Inspect mating surfaces and replace any damaged clips, seals, or fasteners as needed
• Use basic hand tools; hold the assembly steady and press the bushing squarely into place
• If the bushing is press-fit, use a suitable driver or press to avoid damage
• Disconnect power and follow all safety precautions before beginning repairs

This refrigerator door handle assembly replaces a damaged or worn door handle so the door opens and closes smoothly and looks finished. It restores a secure grip and helps maintain the appliance's original fit and appearance. What it does

• Replaces a broken, cracked, loose, or missing door handle to restore safe, reliable opening and closing.
• Provides the proper mounting points and grip for normal daily use.
• Helps prevent improper sealing or wear caused by using makeshift grips.
• Matches original mounting configuration for a straightforward replacement when compatible.

• One refrigerator door handle assembly.

• High-level replacement only: basic hand tools required; remove any trim and screws to swap the old handle for the new one.
• Keep fasteners and small parts organized; verify handle orientation before final tightening.
• Disconnect power only if required by your model's service instructions.
• If mounting holes or trim are damaged, inspect parts for additional required repairs before installation.

This rail guide assembly restores smooth, stable sliding of a refrigerator/freezer drawer or shelf rail so bins and drawers open and close properly. Replaces a worn or broken guide to reduce sticking and misalignment. What it does:

• Guides and supports the drawer or shelf along the cabinet rail for consistent movement
• Prevents binding, sagging, or uneven travel that can cause drawers to stick or drop
• Reduces noise from worn or damaged rail components
• Helps restore proper drawer alignment and load-bearing support

• Disconnect power to the appliance before starting work when accessing interior components
• Removal typically requires removing the drawer or shelf to access mounting points; have basic hand tools ready
• Inspect mating rails and fasteners for damage and replace if necessary for proper fit
• Test drawer operation after installation; do not overload drawer beyond manufacturer limits

This slide rail guides and supports a rack or drawer as it moves in and out of your appliance. Replacing a worn rail restores smooth, stable operation and keeps the rack or bin aligned on its track.

• Provides the track and support for a sliding rack, bin, or drawer
• Maintains alignment to prevent tilting, binding, or derailing
• Helps ensure smooth, quiet motion during opening and closing
• Common symptoms: hard to open/close, uneven travel, scraping/clicking noises, rack/drawer popping off the track

• Disconnect power (and water, if applicable) before servicing
• Remove and empty the rack/bin/drawer to access the rail
• Note orientation and transfer any stops/end caps or screws from the old rail if reused
• Secure the new rail and test for smooth travel before reassembly

The Rail, Slide is an OEM part for LG refrigerators. These rails are responsible for allowing shelves and drawers to smoothly glide in and out of the refrigerator compartment. They are designed with precise tolerances and durable materials to withstand frequent use while retaining their smooth operation over time. 

Causes of bad rails can include dents, scratches, or damage accumulated from years of use and repeated opening and closing of shelves/drawers. Wear and tear of moving parts can also cause rails to malfunction. 

Symptoms of bad rails include:

• Shelves or drawers that don't slide smoothly
• Items getting stuck or jammed when trying to remove them from the fridge 
• Gapping or misalignment of shelves/drawers in their tracks
• Noisy or grinding sounds coming from rail areas

This OEM LG part is also compatible with Kenmore models.

This connector rail provides the electrical connection support used on the appliance's wiring harness, helping restore secure, stable connections for reliable operation. Designed as a direct replacement part to repair damaged or worn connector rails. What it does:

• Secures and routes wiring to maintain proper electrical contact
• Replaces cracked, broken, or loose connector rail assemblies
• Helps resolve intermittent power or signal loss caused by poor connections
• Restores OEM-style mounting and alignment for the harness

• Disconnect power to the appliance before beginning any repair to avoid shock or injury
• Inspect surrounding wiring and connectors for damage; replace any burnt or frayed wires
• Use basic hand tools; avoid forcing clips or fasteners to prevent breakage

This ice maker drive gear engages the ice maker's motor to rotate the ejector and harvest ice, restoring proper ice ejection and cycle movement. Replace a worn or damaged gear to stop slipping, loud grinding, or failed ice release. What it does:

• Transfers motor torque to the ice ejector and harvest mechanism for consistent ice removal
• Helps maintain proper timing and rotation of the ice maker assembly
• Commonly linked to symptoms such as grinding noises, slipping, incomplete ice ejection, or no ice harvest
• Works as a direct replacement gear in the ice maker drive train when the OEM gear is worn or stripped

• Disconnect power to the refrigerator before servicing the ice maker to avoid shock or injury
• Handle plastic gears carefully to avoid breakage; inspect mating splines for wear and ensure proper fit
• If other ice maker components show wear (motor, shaft, ejector), inspect and replace as needed for reliable operation
• Use OEM-specified part number for proper fit and alignment

This center hinge assembly is the OEM replacement hinge that supports and aligns the refrigerator door at the cabinet center, restoring proper door movement and a secure seal for normal operation. What it does:

• Supports the refrigerator door so it opens and closes on the center pivot point
• Keeps door properly aligned to maintain an even gap and help the gasket seal
• Reduces sagging, rubbing, or unusual door movement when worn or damaged
• Ensures smooth pivoting and consistent door positioning during regular use

• Disconnect power and remove food from door shelves before starting work.
• Support the door while removing and installing the hinge to prevent dropping or injury.
• Follow the manufacturer's service manual for correct disassembly/reassembly order and torque specs.
• Wear gloves and eye protection; inspect surrounding parts (screws, brackets) and replace if damaged.

This turntable roller ring sits under the glass tray and allows it to rotate smoothly for even heating. Replace a worn, warped, or broken ring to restore stable rotation and consistent cooking performance.

• Supports the glass turntable and rides on built-in rollers for smooth, quiet movement
• Keeps the tray level and centered to promote even heating
• Common symptoms: tray not turning, uneven cooking, scraping/grinding noises, or a wobbly/slipping turntable
• Restores proper interaction between the turntable, drive coupling, and motor

• Unplug the microwave or switch off the breaker before servicing
• Remove the glass tray; lift out the old ring and clean the track
• Place the new ring with the rollers facing down on the track; reseat the tray on the center drive coupling
• Test rotation with a microwave-safe cup of water

The Spanner Wrench is an OEM replacement part for LG refrigerators. This tool allows you to adjust the door hinges to ensure the doors are level and aligned properly. A well-aligned door is crucial for maintaining the internal temperature and efficiency of the refrigerator, preventing energy loss and ensuring food is stored under optimal conditions.

Symptoms that you might need to adjust the door hinges and potentially need this wrench include:

• Doors not closing properly or sealing tightly
• Visible gaps between the door and the main body of the refrigerator
• The refrigerator tilting or not sitting level

This spanner wrench is also compatible with some Sears/Kenmore refrigerators. 

This replacement door basket mounts on the inside of the refrigerator door to hold bottles, jars, and condiments. It restores secure, easy-access storage when the original bin is cracked, loose, or missing.

• Provides on-door storage and organization for frequently used items
• Replaces a damaged bin with broken tabs or a basket that won't stay seated
• Helps prevent items from tipping or falling due to a worn or loose bin
• Snaps into the molded door-liner slots for a stable, proper fit

• Disconnect power to the refrigerator before servicing
• Remove contents and lift the old basket straight up and out of the door slots
• Align the new basket with the correct slots and press down until it clicks into place
• Do not force; recheck orientation and slot position

This Door Basket Assembly is a replacement door bin that restores storage on your refrigerator door so bottles and containers stay organized and secure. It matches OEM fit and mounts where the original door shelf sits. What it does:

• Provides a sturdy shelf on the refrigerator door to hold bottles, jars and small containers
• Replaces cracked, broken or warped door bins that let items tilt or fall
• Restores original storage capacity and organization of the door interior
• Fits into the existing door shelf slots and uses the same retainers as the original

• Remove all items from the door and lift out the damaged basket; snap the replacement into the molded slots
• Use moderate hand force to seat the bin; do not force beyond the designed stops
• Wear gloves to protect hands from sharp edges on older, damaged parts
• No special tools required for most installations; for door removal instructions if needed

This upper hinge assembly supports the refrigerator door at the top, providing a smooth pivot and proper alignment. Replacing a worn hinge restores even gaps and a tight seal to help maintain consistent cooling performance.

• Supports the door's weight and provides the top pivot point
• Maintains alignment for correct gasket compression and a tight seal
• Helps the door open and close smoothly without rubbing or binding
• Common signs of wear: door sagging or misalignment, rubbing/clicking noises, and poor sealing or condensation around the gasket

• Unplug the refrigerator before servicing.
• Remove the top hinge cover; retain screws and any shims for reuse.
• Support the door with a helper while removing and installing the hinge.
• Position the new hinge, align the door, then tighten screws and verify smooth swing and full gasket contact all around.

This hinge secures and guides a refrigerator door for reliable opening and closing. It restores proper door alignment to help maintain an airtight seal and prevent sagging or rubbing. What it does:

• Supports the refrigerator door and attaches it to the cabinet frame
• Guides smooth door movement and maintains alignment
• Helps prevent door sag, uneven gaps, and items catching when opening/closing
• Reduces rubbing, scraping or abnormal door noise caused by a worn hinge

• Disconnect power and remove food from the door before starting; support the door to prevent dropping
• Use the factory mounting screws and follow OEM torque and alignment steps
• Check door position and seal after installation; adjust hinge mounting if necessary

This lever holder is the replacement mounting bracket that secures the door lever so the microwave door operates smoothly and reliably. It restores proper lever alignment to help the door latch and release as intended. What it does:

• Secures the door lever assembly so the door can latch and release properly
• Keeps the lever aligned to prevent binding, sticking, or loose movement
• Helps restore normal door operation and user access to the oven cavity
• Common symptom: door feels loose, lever moves freely, or door will not latch

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the outer cabinet or door trim only as needed to access the lever area
• Handle door components and glass carefully to avoid damage or injury

The Link is an OEM part for LG refrigerators. It serves as an integral connector between the refrigerator door and cabinet, facilitating smooth opening and closing of the door. With durable construction and precise engineering, the link is designed to withstand the rigorous motion of hundreds of door openings without compromising functionality. 

Symptoms of a bad link include:

• Doors that do not close or seal properly 
• Excessive noise or vibration from the door area
• Damage, bending, or breakage of the connecting pieces
• Misalignment impairing proper door operation

Causes can stem from normal wear and tear over many years of use. Replacing a faulty link restores the refrigerator door's designed motion for convenient access to the interior.

This OEM LG part fits seamlessly while extending the product's useful life. This part is also compatible with Kenmore models featuring LG's refrigerator link assembly design.

This electrical wire-harness connector links wiring to the appliance's control or component, restoring a secure electrical connection and helping eliminate intermittent power, no-start, or erratic component behavior. What it does:

• Provides a secure mating point between the wiring harness and an appliance control, motor, or sensor
• Restores reliable electrical contact when the original connector is damaged, corroded, or loose
• Can stop symptoms like intermittent operation, loss of power to a component, arcing, or related error codes
• Designed to match the OEM shape and terminal arrangement for a direct replacement

• One connector

• Disconnect power (unplug or switch off circuit breaker) before servicing to avoid shock
• Verify the connector matches the original by comparing terminal count, shape, and wire colors before installation
• Inspect mating terminals and wiring for damage; repair or replace harness wires if needed

This replacement spring provides the tension for a door hinge, helping the door open smoothly and stay closed for a proper seal and consistent appliance performance.

• Applies controlled tension to the hinge mechanism for smooth door movement
• Helps the door stay closed and aligned against the gasket
• Worn or broken spring symptoms can include the door dropping open, not staying closed, an uneven gap, or squeaking/binding at the hinge
• Restores normal feel and operation to the door

• Disconnect power and allow the appliance to cool completely before servicing
• Support the door; removal of the door or hinge arm may be required
• Use caution—hinge springs are under significant tension; wear gloves and eye protection
• Replacing both springs together helps maintain balanced tension

This evaporator assembly circulates refrigerant and helps remove heat inside the freezer compartment so your refrigerator can maintain proper cold temperatures. Replaces a worn or damaged evaporator to restore normal cooling performance. What it does:

• Circulates refrigerant through the evaporator coil to absorb heat from the freezer compartment
• Removes frost and maintains proper airflow when paired with the defrost system
• Commonly replaced for symptoms like excessive frost buildup, poor cooling, or a noisy evaporator area
• Works with the existing fan, heater, and defrost components to support normal cooling cycles

• Disconnect power to the appliance before starting to avoid shock or compressor damage
• Replacement may require access to the freezer liner, removal of shelving and trim, and refrigerant system service if sealed-system work is needed
• Inspect and replace any damaged grommets, mounting hardware, or seals to prevent vibration and leaks
• Follow OEM service instructions for proper routing, torque, and defrost-heater connections

This PTC thermistor assembly senses temperature and helps control heating cycles for safe, consistent operation. Replaces a failed sensor to restore accurate temperature readings and help the appliance maintain proper heat control. What it does:

• Detects temperature changes and sends a signal to the control board to regulate heating elements or compressors
• Helps prevent overheating by enabling correct cycling of the heater or compressor
• Commonly linked to symptoms such as no/insufficient heat, intermittent heating, or error codes for temperature sensor faults
• Works as the temperature-sensing component in the appliance's thermal control system

• One thermistor assembly (PTC) as shown

• Disconnect power before attempting service to avoid shock or injury
• Handle the sensor and wiring gently; ensure connectors are fully seated and secure
• Route wiring and mount the sensor exactly as the original to ensure proper readings

This overload protector is a motor thermal cut-off that helps prevent motor overheating by interrupting power when temperatures get too high. It restores normal operation after the motor cools, helping protect the motor from heat damage. What it does:

• Senses excess motor temperature and interrupts power to prevent overheating
• Commonly used when a washer or motor hums, won't spin, or stops mid-cycle
• Protects the motor and associated components from heat-related failure
• Resets or is replaced after a thermal fault clears, depending on design

• Disconnect power before accessing the motor or electrical components
• Handle and mount the protector per OEM orientation to ensure proper thermal contact
• Inspect motor and wiring for underlying faults before replacing

This cabinet roller supports the refrigerator and lets the unit roll in and out of place for cleaning or service. Replace a worn or broken roller to restore smooth movement and help keep the appliance properly positioned.

• Supports the base of the refrigerator and enables rolling movement
• Helps with safe positioning and service access without dragging
• Common failure signs: appliance is hard to move, scraping or rolling noises, a flat-spotted/cracked wheel, or a wheel that won't turn
• Replace when the roller is damaged, seized, or missing

• Disconnect power and shut off water supply; protect flooring before moving the appliance
• With help, pull the refrigerator forward and safely support it to access the roller
• Remove mounting fasteners, install the new roller, and reuse original hardware
• Confirm level and smooth movement before returning the unit to its location

This is a replacement retaining pin used to secure small moving parts and assemblies in compatible LG appliances. It restores proper alignment and holds components in place so assemblies operate smoothly. What it does:

• Secures and locates components within an assembly to prevent shifting or disengagement
• Helps maintain proper alignment for moving parts that can cause noise or malfunction when loose
• Commonly used where a small, durable metal pin is needed to retain clips, levers, or linkages
• Simple, single-purpose part — replacement when the original is bent, worn, or missing

• One retaining pin

• Unplug the appliance or disconnect power before servicing
• Access the affected assembly per the appliance service instructions; small fasteners or clips may need removal
• Use pliers or appropriate hand tools to remove/install the pin; avoid forcing to prevent damage
• Keep track of orientation and any associated clips or washers during disassembly

This fan guide directs airflow inside the appliance to improve cooling efficiency and protect the fan assembly. It replaces a worn or broken guide so the fan blades run without rubbing and airflow stays properly channeled. What it does:

• Channels air from the fan to the correct internal passageways for consistent cooling
• Keeps fan blades centered and prevents contact with surrounding components
• Helps reduce vibration and noise caused by a damaged or loose guide
• Common symptom: noisy fan, blade rubbing, or uneven cooling in the compartment

• One replacement fan guide

• Disconnect power before servicing to avoid shock or injury
• Remove access panels and the fan assembly to reach the guide
• Inspect adjacent fan blades and mounts for damage; replace any worn parts
• Reassemble panels and test operation before returning appliance to service

The Fan Motor Assembly is an OEM part for LG refrigerators. It is responsible for circulating air throughout the refrigerator and freezer compartments to maintain consistent temperatures. By ensuring proper airflow, the fan motor helps to keep your food fresh and evenly cooled.

Over time, fan motors can wear out or become damaged due to factors such as dust buildup, electrical issues, or general wear and tear from continuous use. A faulty fan motor can lead to uneven cooling, increased energy consumption, and potential spoilage of food.

Symptoms of a bad fan motor include:

• Unusual noises coming from the refrigerator
• Inconsistent temperatures in the fridge or freezer
• The refrigerator running constantly or cycling on and off frequently
• Frost buildup in the freezer section

This OEM LG part is also compatible with Sears/Kenmore.

This rear machinery cover protects the washer's motor and drive components from debris and accidental contact, keeping internal parts enclosed for safer, more reliable operation. What it does:

• Covers and shields the motor, drive shaft and associated machinery at the back of the tub
• Helps keep lint, dust and small objects away from moving parts
• Reduces risk of accidental contact when accessing the rear cabinet
• Can reduce exposure of electrical connections to incidental moisture or debris

• One rear machinery cover assembly

• Disconnect power to the appliance before beginning any service
• Remove the cabinet or rear access panel as required to reach mounting locations
• Handle carefully to avoid bending tabs; secure with factory screws or clips

This small stopper installs in the refrigerator to limit the travel of a moving component and keep it securely in place. Replacing a broken or missing stopper prevents over-extension and helps maintain smooth, aligned operation.

• Limits the range of motion for a door, bin, or drawer to prevent over-opening or accidental removal
• Helps keep interior components aligned and operating smoothly
• Replace if cracked, missing, or deformed
• Common symptoms: drawer or bin slides out too far, door swings past normal range, or a broken plastic stop is found

• Disconnect power before servicing; remove or support the affected bin/drawer/door
• Note the old stopper's orientation and location before removal
• Transfer and reuse any original screws or clips if applicable
• Snap or fasten the new stopper in place and test for smooth movement

This holder is a small mounting bracket used to secure internal components in place, helping keep parts aligned and stable for reliable operation. It provides a direct, OEM-compatible replacement to restore proper fit and function. What it does

• Secures and supports nearby components to prevent shifting or vibration.
• Restores proper alignment where a worn or broken holder causes rattling or loose parts.
• Helps maintain normal operation by keeping assemblies seated correctly.
• Works behind panels or inside assemblies where a dedicated bracket is required.

• One holder/mounting bracket as shown.

• Installation generally requires removing the panel or access cover where the holder is located.
• Use proper fasteners shown in your appliance; replace any damaged screws or clips as needed.
• Disconnect power before servicing electrical appliances to reduce shock risk.

The Dispenser Micro Switch is an OEM part for LG refrigerators. It is a component of the ice and water dispensing system, responsible for activating the dispenser when the lever is pressed. 

Causes of a bad Dispenser Micro Switch can include mechanical wear from frequent use, failure due to moisture or debris affecting the switch’s contacts, or electrical faults that prevent proper signaling.

Symptoms of a bad Dispenser Micro Switch include:

• The dispenser not releasing ice or water when the lever is pressed.
• Continuous dispensing or dripping after the lever is released.
• Intermittent or no response from the dispenser controls.

This OEM LG part is also compatible with Sears/Kenmore.

This fan assembly circulates air within the appliance to maintain steady temperatures and efficient cooling. Replacing a worn or noisy unit restores proper airflow, reduces hot or cold spots, and helps protect other components. What it does:

• Moves air through the appliance and across cooling components for even temperature distribution
• Helps remove heat and moisture as designed for efficient operation
• Replaces a seized, slow, intermittent, or noisy fan/motor assembly
• Common symptoms include weak or no airflow, temperature fluctuations, or abnormal humming/rattling sounds from the fan area

• 1 fan assembly

• Disconnect power before servicing; allow any iced or brittle plastic areas to warm/defrost
• Remove access panels/ducts as needed; note wire routing and take photos for reference
• Transfer any reusable brackets, grommets, or screws from the original assembly
• Ensure the blade spins freely and wiring is clear of the fan path before reassembly and testing

Replacement lamp cover that protects and diffuses an appliance's interior light, restoring even illumination and shielding the bulb from spills and contact. Restores proper light output and appearance after a cracked or missing lens. What it does:

• Protects the interior light bulb from food splatter, grease, and accidental contact.
• Diffuses and evens interior illumination to reduce hot spots and glare.
• Replaces cracked, yellowed, or missing lenses that can cause dim, flickering, or exposed-bulb issues.
• Matches the original lamp housing shape and secures with the appliance's existing clips or screws.

• Always disconnect power (unplug appliance or switch off circuit) and allow the bulb to cool before beginning.
• Remove any retaining screws or clips carefully; handle the cover gently to avoid cracking.
• Seat the cover securely in the lamp housing and reinstall original hardware—do not overtighten screws.
• After installation, restore power and verify the light operates and the cover is properly seated.

The Magnet Switch is an OEM part for LG refrigerators. It plays an important role in monitoring the position of the refrigerator door. 

The magnet switch works together with a magnet installed in the door gasket to detect when the door is opened or closed. It communicates this information to the control board which uses it to manage temperatures and fan speeds accordingly. 

Causes of a bad magnet switch can include wear and tear over time, physical damage, or failure of internal components. 

Symptoms of a bad magnet switch include:

• Improper cooling and freezing performances 
• Inability to detect when the door is opened
• Erratic temperature fluctuations
• Errors codes relating to door sensors

This genuine OEM LG magnet switch restores the door monitoring functions of your refrigerator. It is also compatible with Sears/Kenmore refrigerator models.

This door switch cover houses and protects the refrigerator/freezer door switch, keeping the switch secure and aligned so the interior light and door-sensing functions work reliably. It's a direct-fit replacement for damaged or cracked covers. What it does:

• Protects the door switch from impacts, spills, and debris that can cause intermittent contacts or failure
• Keeps the switch properly positioned so the interior light turns on/off when the door opens and closes
• Helps ensure consistent door-sensing for control logic that manages defrost and cooling cycles
• Reduces the risk of moisture reaching the electrical switch components

• One door switch cover

• Power off and unplug the appliance before beginning any repair to avoid shock or damage
• Handle gently to avoid breaking the plastic tabs; some models use snap-in tabs or screws for mounting
• Verify switch alignment and operation before fully reassembling the door trim
• Replace the switch assembly as needed

The Power Cord Assembly is an OEM replacement part for LG refrigerators. It includes both the electrical cord and strain relief connector that links the refrigerator to a standard wall outlet.

This power cord assembly is responsible for safely delivering electricity from the outlet to the control board and components inside the refrigerator compartment. It allows the unit to properly power on and maintain cold interior temperatures.

Symptoms of a bad power cord assembly can include: 

• The refrigerator fails to power on at all
• Electrical humming, buzzes, or burning smells detected  
• Tripped circuit breakers interfering with the operation
• Indicators of cord fatigue such as cracks or frays

Causes may involve normal wear over years of use, improper strain relief, or physical damage. Replacing the cord assembly with this genuine LG OEM part ensures a continued reliable power supply to the unit. It is also compatible with Kenmore refrigerators.

This Main PCB Power Control Board is the primary control assembly that manages your appliance's power distribution and control functions, restoring normal operation when the original control board fails. What it does:

• Controls power delivery to motors, valves, heaters and system electronics to coordinate appliance cycles
• Replaces a failed or damaged main control board that causes no power, intermittent operation, or unresponsive controls
• Helps resolve symptoms such as appliance not starting, random shutdowns, or erratic cycle behavior
• Works with the appliance's sensors and user interface to execute programmed functions

• One Main PCB Power Control Board assembly

• Disconnect all power before starting — this board carries live voltage
• Handle the PCB carefully and avoid touching components; use anti-static precautions if available
• Verify connectors are fully seated and routed clear of moving parts before reassembly

This sub PCB assembly is an electronic control board that processes inputs and switches components, coordinating specific appliance functions. Replacing a failed board can restore normal operation and resolve dead controls, error codes, or intermittent, unpredictable behavior. What it does:

• Distributes and regulates control power and switches loads via onboard relays/triacs
• Interprets signals from sensors and the user interface to execute commands
• Coordinates timing and operation of related components per the appliance's program logic
• Failure may present as no power, won't start, unresponsive or flickering display, random beeps, or recurring error codes

• 1 sub PCB assembly

• Disconnect power to the appliance before servicing; verify no voltage is present
• Use ESD protection and handle the board by the edges
• Photograph wiring; transfer connectors one at a time and ensure they are fully seated
• Secure the board with existing fasteners/standoffs; perform any required reset or diagnostic per your model's service info

This ice maker assembly replaces the refrigerator's molded ice-making unit to restore automatic ice production. It installs in the freezer compartment and collects, freezes and ejects ice cubes so the dispenser and storage bin work reliably. What it does

• Replaces the molded ice-making unit that forms and harvests ice cubes.
• Cycles through fill, freeze and harvest to move ice into the storage bin.
• Common symptom: refrigerator stops producing ice or ice production is reduced.
• Common symptom: ice jams, continuous motor cycling, or visible damage to the ice tray.

• Disconnect power to the appliance and shut off the water supply before starting.
• Handle the assembly carefully to avoid damaging the thermostat, heater strip or fill tube.
• Align mounting tabs and fasteners; do not force components—confirm electrical connector engagement.

This ice maker assembly restores automatic ice production. It replaces a failed ice maker so your refrigerator can consistently form, freeze, and harvest cubes into the bin, resolving common no-ice and intermittent-ice issues.

• Automates fill, freeze, and harvest cycles to produce ice
• Ejects cubes into the bin and resets for the next batch
• Common fixes: no ice or very slow ice production
• Ice maker won't cycle, stops mid-cycle, or cubes won't eject
• Clicking or grinding noises from the ice maker mechanism

• Disconnect power and shut off the water supply before servicing.
• The fill tube is clear of ice and properly aligned; thaw any blockage before installation.
• Reuse existing mounting hardware; compare parts and transfer any covers or connectors as needed.
• Restore water and power, then allow time for the new ice maker to complete initial cycles.

The Auger Motor is an OEM part for LG refrigerators. It is responsible for dispensing ice from the icemaker into the ice bucket. 

Symptoms of a bad auger motor include:

• Slow or incomplete ice filling of the ice bucket
• Ice clumping or jamming in the auger assembly 
• Grinding or rubbing noises coming from the icemaker region
• The icemaker not producing any ice at all

Causes of a bad auger motor can be wear and tear over time, freezing or ice buildup preventing proper operation, or failure of internal motor components. 

This OEM LG part is also compatible with select Sears/Kenmore models. 

The Water Line Connector is an OEM replacement part for LG refrigerators. It is responsible for connecting the water supply line from the home plumbing to the refrigerator's internal water distribution system, allowing for ice and water dispenser functionality. 

Causes of a bad water line connector can include cracking, leaks, or deterioration of the connector material over time due to regular water pressure and temperature fluctuations. Connectors may also become damaged if exposed to impact.

Symptoms of a bad water line connector include:

• Leaks at the connection point between the line and refrigerator
• Loose, slipping, or disconnected water line fitting  
• Reduced water pressure or no water flow to the dispenser
• Error codes related to water flow from the refrigerator diagnostics

 This OEM LG part is also compatible with Sears/Kenmore refrigerators.

The Clip is an OEM part for LG refrigerators. This clip secures the water tube in place, preventing it from moving or becoming disconnected. It plays a crucial role in maintaining the proper flow of water to the ice maker and water dispenser.

Causes of a bad water tube clip can include physical damage, wear and tear from regular use, or brittleness due to temperature fluctuations. If the clip fails, it can result in leaks or disconnections, disrupting the water supply.

Symptoms of a bad water tube clip include:

• Water leaks inside or outside the refrigerator
• The water tube becoming loose or disconnected
• Reduced or no water flow to the ice maker or water dispenser

This OEM LG part is also compatible with Sears/Kenmore refrigerators.

This fan grille assembly covers and directs airflow from the refrigerator's internal fan. It protects the fan and channels cold air through the compartment to help maintain consistent temperatures and quiet, reliable circulation.

• Shields the evaporator fan and guides air through the ducting for even cooling
• Restores proper airflow if the original grille is cracked, missing, or warped
• Helps prevent items from contacting the fan blades
• Common symptoms: rattling or scraping noises, obstructed airflow, uneven cooling, visible damage to the rear grille

• Disconnect power and remove shelves/drawers to access the rear interior panel
• Remove mounting screws and release tabs; pull the old grille/duct straight out
• Seat the new grille fully so ducts and seals align before tightening screws
• Restore power and confirm the fan runs quietly with unobstructed airflow

This PCB assembly sensor is the replacement sensor control board that reads appliance sensors and relays their signals to the main control so the appliance can monitor conditions and respond correctly. What it does

• Receives input from temperature/humidity/position sensors and converts signals for the main control
• Helps the control detect sensor faults or out-of-range readings
• Restores proper sensor communication when a failed board causes errors or unresponsive functions
• Can stop symptom-causing false readings that lead to incorrect cycles or error codes

• Disconnect power to the appliance before removing or installing the board to avoid electric shock.
• Handle the PCB carefully and avoid touching contacts; use ESD precautions if available.
• Verify the part number on the board before installing.

This assembly stores ice and delivers it from the ice maker to the dispenser. Replace it when the bin is cracked, warped, or its drive components are damaged, causing weak dispensing, jams, or being stuck on one ice type.

• Stores ice and interfaces with the dispenser system to deliver cubes or crushed ice
• Resolves no or weak ice dispensing
• Corrects grinding/clicking noises or auger jamming from a damaged bin
• Addresses visible cracks, broken tabs, or a bucket that won't seat securely

• Disconnect power to the refrigerator before servicing
• Open the door and pull the old bucket straight out; depress any release tab if equipped
• Align and seat the new assembly fully so the drive coupling engages—do not force it
• Restore power and test the dispenser (cube and crush selections)

This dispenser assembly for the ice chute mounts behind the refrigerator door to support ice dispensing and guide cubes/crushed ice to the dispenser outlet, restoring smooth ice delivery and reducing jams at the dispenser opening. What it does:

• Replaces the internal ice dispenser housing that channels ice from the bin to the dispenser
• Helps stop ice from binding or falling behind the door when dispensing
• Restores proper alignment of the ice chute and actuator path
• Works with the dispenser door and auger/ice mechanism to deliver ice to the user

• One dispenser assembly (ice) as shown

• Disconnect power and shut off water to the refrigerator before beginning work
• Removal typically requires door trim/access panel removal and careful handling of wiring connectors
• Inspect adjoining components (actuator, chute seals, ice bin) for wear when replacing this assembly

The Water Tank is an OEM part for LG refrigerators. It is responsible for storing and supplying water to the refrigerator's internal dispenser and ice maker. Made from food-grade plastic, the water tank is designed to hold water in a safe, sealed container.

Causes of a bad water tank can include cracks that develop over time, possibly from repeated fillings and drainings of the tank which lead to stress fractures. Mineral or sediment buildup may also cause issues.

Symptoms of a faulty water tank include:

• Leaks or water spillage inside the refrigerator 
• Inconsistent or disrupted water supply to the dispenser/icemaker
• Irritating noises from water sloshing around a damaged tank

This OEM LG part is also compatible with Sears/Kenmore refrigerator models. Proper installation of this replacement part will restore full water functionality.

The Connector (Mech), Tube is an OEM part for LG refrigerators. It is used to securely connect water tubing within the refrigerator, ensuring a reliable flow of water to components such as the ice maker and water dispenser.

Causes of a bad connector can include wear and tear over time, physical damage from improper installation or handling, or degradation due to exposure to varying temperatures and water pressure.

Symptoms of a bad connector include:

• Leaks or drips around the connector area
• Reduced water flow to the ice maker or water dispenser
• Water pooling inside or around the refrigerator
• The ice maker or water dispenser not functioning properly

This OEM LG part is also compatible with Sears/Kenmore models.

The Tube is an OEM replacement part for LG refrigerators. It is a 1/4" plastic tubing that transports water from the main supply line to the refrigerator's water dispenser and ice maker. 

Over time, causes of a faulty water line can include mineral buildup restricting water flow, microscopic cracks developing from regular use and pressure fluctuations, or kinks interfering with the flow. 

Symptoms of a problematic water line include:

• Slow or intermittent water flow from the dispenser
• Incomplete fills of ice trays
• strange noises when water is dispensed
• Water leaks underneath or behind the fridge 

This LG part is also compatible with Sears/Kenmore refrigerators.

Note: This is a roll of 1/4" tubing 300 meters long.

The Water Valve Assembly is an OEM part for LG refrigerators. This assembly controls the supply of water to areas within the refrigerator including the icemaker and water dispenser.

Causes of failure can be mineral buildup over time restricting flow, or damage to solenoid valves and electronic components regulating water pressure and distribution.

Symptoms of a bad water valve assembly include:

• Dripping or flooding from the water line connections
• Inability to dispense water or make ice
• Water levels that fluctuate erratically

This OEM LG part is also compatible with some Kenmore models.

Restore reliable water delivery with this refrigerator water inlet valve assembly. It regulates flow from your home's water supply to the dispenser and ice maker, providing accurate fills and a positive shutoff to help reduce leaks and drips.

• Opens and closes electronically to direct water to the dispenser and ice maker
• Helps control fill volumes for dispensing and ice tray fills
• Seals closed when not energized to prevent seepage
• Common symptoms of a failing valve: no/low dispenser flow, little or no ice, slow filling, leaks, or dripping after dispensing

• Unplug the refrigerator and turn off the water supply before servicing
• Relieve line pressure by dispensing water; place a towel to catch residual water
• Note wire and tube locations; move connections one at a time to the new valve
• Restore water, check all joints for leaks, flush several cups of water, and discard the first batch of ice

The Filter assembly,water is an OEM component specifically designed for LG refrigerator water filters. This assembly contains activated carbon blocks that remove impurities from the water supply as it flows through. 

Causes for replacement include normal filter exhaustion from heavy water use, or accidental damage. LG recommends changing the filter every 6 months for optimum performance.

Causes of a bad water filter assembly include:  

• Impurities detected in taste tests of dispensed water
• Slimy or unappealing buildup in water lines or dispenser area  
• Error codes or functionality issues with the dispenser

This OEM LG part is also compatible with select Sears/Kenmore refrigerators.

This water inlet valve assembly regulates the flow of household water into your refrigerator. Replacing a sticking or leaking valve restores proper fill for ice production and dispensing and helps stop drips, low flow, and overfill issues.

• Opens and closes to control water flow from the supply line into the refrigerator's water system
• Directs water to the ice maker and dispenser as commanded by the control system
• Seals off when closed to prevent seepage or dispenser drip
• Common failure symptoms: no ice, no or slow dispenser water, leaking at the valve or connections, humming/buzzing from valve with no water flow

• Unplug the refrigerator and shut off the household water supply before servicing
• Pull the unit forward for access; relieve line pressure and place a towel or pan to catch residual water
• Note tubing and wire locations; move them one at a time to the new valve and avoid overtightening fittings
• Restore water and power, check all connections for leaks, and dispense water to purge air from the system

This cover cap is a small plastic trim piece that protects exposed fasteners and improves the appliance's appearance. It snaps into place to hide mounting posts and help prevent snags or debris buildup. What it does:

• Covers and protects exposed screws, posts, or fasteners for a finished look
• Prevents lint, dust, and debris from collecting around the mounting point
• Reduces the chance of fabric snags or contact with sharp edges
• Restores worn or missing trim for improved cosmetics

• Disconnect power to the appliance before starting any service that exposes electrical components
• Usually installs by snapping over the post or press-fitting into the trim opening — no special tools required
• If needed, remove adjacent trim pieces to gain access, then reinstall trim in reverse order
• Inspect surrounding mounting hardware for damage and replace if necessary

This connector tube is a molded inline water connector used on select refrigerators to join water lines and help deliver water to the dispenser or ice maker. It restores a secure path for water flow and helps stop leaks. What it does

• Joins two sections of the refrigerator water line to maintain continuous water flow.
• Creates a sealed connection to prevent dripping or leaking at a damaged or worn joint.
• Helps restore water delivery to the ice maker or dispenser when a broken connector is the cause.
• Compatible with the refrigeration plumbing layout where a short molded connector is required.

• One connector tube as shown.

• Turn off the water supply and unplug the appliance before starting work.
• Inspect tubing ends and fittings; trim damaged tubing and use correct push-fit or compression fittings as required.
• Tighten connections securely but avoid overtightening plastic fittings; check for leaks after restoring water.

This water filter assembly replaces the refrigerator's water filtration module to help restore clear-tasting water and steady flow. Fits models that use the AGF80300705 assembly and installs at the refrigerator water inlet. What it does:

• Filters sediment and common taste/odor contaminants to improve drinking water quality
• Restores reduced water flow caused by a clogged or failing filter module
• Helps reduce visible particulates and cloudiness in dispensed water
• Prevents unfiltered water from reaching the dispenser/ice maker when installed

• Turn off refrigerator water supply before replacing the assembly to avoid leaks
• Hand-tighten connections; avoid overtightening fittings to prevent damage
• Run and discard the manufacturer-recommended initial volume of water after install to flush the system

The Filter Head Assembly is an OEM component for LG refrigerators. This specialized assembly houses the water inlet valve, filter cartridge, and dispensing head for the built-in water dispenser.     

Symptoms of a failing filter head assembly include:

• Slow or inconsistent water flow from the dispenser  
• Deteriorating water quality or taste over time
• The filter cartridge fails to properly click into place

Causes related to mineral buildup clogging components, worn outlet valves, or damage from freezing over long periods of non-use.

This OEM LG part is also compatible with some Kenmore models for simple, drop-in replacement. 

This pipe holder is a small plastic clip that secures tubing and small pipes inside the appliance, helping keep lines organized and preventing rubbing or disconnection. It restores proper routing and reduces vibration-related noises. What it does:

• Holds and secures water, drain, or refrigerant tubing to prevent sagging and chafing
• Keeps lines routed away from moving parts to reduce wear and noise
• Helps maintain proper tube alignment to avoid strain on fittings
• Commonly replaced when the original clip is cracked, broken, or missing

• Disconnect power and water before working on the appliance
• Inspect surrounding tubing and fittings for damage when replacing the clip
• Typically installs as a push-fit or snap-on clip; use gentle pressure and avoid forcing
• Replace broken or brittle clips to prevent tubing damage or leaks

This complete freezer door assembly replaces a damaged or worn freezer door to restore proper closure and cold retention. It fits the freezer compartment and includes the door shell and attached inner components for a like-for-like replacement. What it does:

• Replaces a cracked, dented, or warped freezer door to help prevent cold air loss
• Restores proper door alignment and sealing to reduce frost buildup and temperature issues
• Provides the original mounting points and inner components for easy fitment
• Helps the freezer maintain consistent performance when the old door can't close or seal properly

• Disconnect power to the appliance before starting any repair
• Remove food and shelves from the freezer area for access and safe handling
• Installation typically requires basic hand tools; support the door during removal/installation to avoid injury or damage
• If the door contains glass or trim, handle carefully.

The Ice Bank Door Gasket is an OEM part for LG refrigerators. This gasket is designed to seal the ice bank door, ensuring a tight closure to maintain optimal temperatures inside the ice compartment. By preventing warm air from entering, it helps preserve the quality and quantity of ice produced by the icemaker.

Causes of a bad gasket can include wear and tear from frequent opening and closing of the door, physical damage from cleaning or mishandling, or degradation over time due to exposure to temperature changes.

Symptoms of a bad Ice Bank Door Gasket include:

• Ice melting or clumping in the ice compartment
• Frost buildup around the ice bank door
• Increased energy consumption
• The gasket appearing cracked, brittle, or deformed

This OEM LG part is also compatible with Sears/Kenmore.

The Lever Cover is an OEM part for LG refrigerators. This cover fits neatly over the freezer door lock mechanism, protecting its internal lever and hardware.

Causes of a bad lever cover can include damage from regular opening and closing of the freezer door over time. Accidental impacts or heavy impacts from moving the refrigerator could also crack or weaken the plastic material.

Symptoms of a bad lever cover include:

• Exposure of the lock mechanism that allows dust and debris to enter
• Improper shielding of lock parts leading to potential jamming issues
• Cracking or breakage of the plastic allowing outside contaminants inside

This OEM LG part is also compatible with some Kenmore models.

This lower hinge assembly secures and supports the refrigerator door pivot, restoring proper door alignment and smooth opening/closing. Replace a worn or damaged lower hinge to stop sagging, help seal performance, and reduce rubbing or binding. What it does:

• Provides a stable pivot point for the lower side of the refrigerator door.
• Corrects door sagging or misalignment that can cause poor sealing or uneven gaps.
• Reduces rubbing, scraping, or binding when opening and closing the door.
• Restores proper door operation after impact damage or worn hinge components.

• One lower hinge assembly

• Disconnect power and remove food from the door area before starting; support the door to prevent dropping during removal.
• Keep all original fasteners if they are undamaged; some models may reuse screws or pins.
• Use appropriate tools and take care not to damage the door finish or gasket; wear gloves to protect hands.

This is the Home Bar cover — the molded door shelf cover that protects and conceals the refrigerator's door-in-door/home bar compartment for organized storage and a finished appearance. It restores a secure, clean barrier for items stored in the home bar. What it does:

• Replaces a cracked, chipped or missing home-bar/door-in-door shelf cover
• Keeps small bottles and items contained when the home bar is opened and closed
• Restores the proper fit and appearance of the door-in-door/home bar area
• Helps prevent items from falling out of the home bar compartment

• One Home Bar cover

• High-level replacement: usually removes and snaps into the door-in-door shelf housing; some models may require removing the inner door panel or a few fasteners
• Use basic hand tools; keep track of small screws and clips during reassembly
• Inspect surrounding clips and supports; replace any damaged fasteners for a secure fit
• For safety, close the door fully and check smooth opening/closing after install

The Ice Door Handle Roller is an OEM replacement part for LG and some Kenmore refrigerators. Each handle contains two rollers and they help the handle move smoothly and prevent any unnecessary wear and tear. Please note, this is for one (1) door handle roller. It is recommended to replace both at the same time. 

Symptoms of a bad Ice Door Handle Roller include:

• Difficulty in dispensing ice, with the chute door sticking or not opening properly.
• Noises such as squeaking or grinding when the ice door is activated.
• Increased effort needed to operate the ice dispenser handle.
• Visible wear or damage to the roller, affecting its movement.

Causes of a bad ice door handle roller can include mechanical wear from regular use, debris accumulation that impedes the roller’s movement, or damage from excessive force used on the dispenser handle.

This OEM LG part is also compatible with Sears/Kenmore models.

This replacement air filter assembly restores the refrigerator air-cleaning function to help reduce common food odors and keep the fresh-food compartment smelling fresher. It installs in the factory filter housing for direct replacement. What it does:

• Removes airborne odors and helps control stale or musty smells inside the fresh-food compartment
• Captures odor-causing particles from circulating air to help maintain a neutral interior environment
• Reduces the need for temporary odor-masking workarounds
• Symptom match: persistent or recurring refrigerator odors, noticeable stale air, or reduced air freshness

• One air filter assembly

• Follow the refrigerator manufacturer's service instructions; disconnect power or turn off the appliance before starting service
• Replace only with the correct filter assembly and ensure the unit is seated fully in its housing
• Do not wet the filter element; dispose of the used filter per local regulations
• Allow several hours of normal operation for the filter to become fully effective

This air filter assembly replaces the factory air cleaner in compatible refrigerators to help reduce odors and maintain fresher air inside the fresh food compartment. Designed as a direct-fit replacement when the original filter is worn or clogged. What it does:

• Captures and helps reduce common refrigerator odors for improved internal air quality
• Circulates cleaner-smelling air through the fresh food compartment when the appliance's air circulation runs
• Helps maintain a neutral-smelling environment around stored foods to reduce flavor transfer
• For use when original filter is damaged, heavily soiled, or no longer performing

• One air filter assembly

• Check your owner's manual for the exact filter location and any appliance-specific steps before starting
• Replace with the power off or follow manufacturer guidance for safe access to the filter area
• Dispose of the old filter according to local regulations; avoid forcing parts during removal or installation

The Handle Mounting Stud is an OEM replacement part for LG refrigerator doors. It provides a sturdy mounting point for the door handle assembly. Reliable handle connection and support is crucial for dependable door function and access. 

Causes of a faulty stud can include damage from excess weight or impact over time rendering the stud loose or unstable.

Symptoms of a bad stud include:

• Loose or sagging door handle  
• Difficulty opening and closing the refrigerator door  
• Potential for the handle to detach completely
• Safety concerns if the handle connection fails

This OEM LG replacement stud is also compatible with Sears/Kenmore models.