Parts for Lg LRFOC2606S/00: Freezer Parts

This rear door handle replaces the damaged or worn handle on compatible LG appliances, restoring a secure grip and proper door operation. Durable molded construction matches factory fit for a clean, factory-original appearance. What it does

• Replaces a cracked, loose, or broken rear door handle to restore safe door gripping and operation
• Provides the mounting surface and attachment points used by the factory rear handle assembly
• Helps eliminate rattling or misalignment caused by a damaged handle
• Fits where the original rear handle attaches to the appliance door frame

• One rear handle

• Basic hand tools required; remove power and follow factory service manual for safe disassembly
• Keep fasteners and clips in order; replace any damaged hardware with OEM parts
• Handle mounting faces the interior rear of the door—verify orientation before tightening

Leveling leg for refrigerators. Installs at bottom corner to elevate and stabilize the appliance. Replace if broken, compressed, or no longer secure.

Replacement freezer tray for bottom-mount refrigerators. Restores organization in the freezer compartment when the original tray is cracked or missing.

Small protective cap covers component connections or openings in your refrigerator. Replace when cracked, missing, or worn to protect against dirt and moisture.

Supports the dryer drum for smooth, even rotation during cycles. Replace when you hear squealing or notice drum wobble. Confirm fit with your model number.

Replace a cracked, stained, or warped crisper drawer pan in your bottom-mount refrigerator. Restores clean storage for produce and fresh items.

Replace a cracked, broken, or missing shelf assembly in your bottom-mount refrigerator. This glass or wire shelf installs in the fresh food compartment.

Replacement supporter cover for bottom-mount refrigerators. Secures internal panels and restores proper alignment. Needed when original is cracked or missing.

Replaces the shelf cover over your refrigerator's vegetable drawer. Restores support and alignment when the original is cracked, warped, or damaged.

Replace a cracked, broken, or worn refrigerator shelf assembly. This storage shelf installs inside your bottom-mount refrigerator compartment.

Replace your refrigerator's fresh room tray assembly if cracked, broken, or missing. This tray sits in the fresh room compartment to organize produce and keep items accessible.

Single drawer guide rail for bottom-mount refrigerators. Replaces cracked, worn, or broken rails that cause drawer misalignment or rough sliding.

Rail guide supports and stabilizes refrigerator racks for smooth sliding. Replace worn, cracked, or broken guides to restore proper rack alignment.

Replace your refrigerator's cracked or broken vegetable drawer cover assembly. This clear cover installs over the crisper tray to protect contents.

Drawer rail guide assembly for bottom-mount refrigerators. Replaces broken or worn guides that cause drawers to stick or misalign. Installs on drawer frame.

Fix refrigerator door misalignment or poor sealing with this door alignment magnet. Restores magnetic retention to keep panels and components secure.

Replace worn freezer door foam insulation to restore thermal efficiency and maintain proper temperatures. Direct-fit assembly for door cavity. Verify fit.

Creates an airtight seal around your refrigerator door to prevent warm air from entering. Replace if torn, cracked, or no longer sealing properly. Easy snap-fit installation. Confirm fit with your model number.

Cushions and controls your refrigerator door to prevent slamming and maintain proper alignment. Replace if door slams, misaligns, or stopper is damaged.

Decorative handle trim that covers the refrigerator door edge. Replace if cracked, broken, or worn to restore the finished look and gripping surface.

Decorative door handle for bottom-mount refrigerators. Replaces worn, cracked, or scratched handles to restore appearance and secure grip on door.

Replacement hinge cover for bottom-mount refrigerators. Conceals and protects door hinge mechanism. Order when original is cracked, broken, or missing.

Replace your broken, cracked, or loose freezer door handle. This assembly installs on the freezer door to restore a secure grip for smooth opening and closing.

Door foam assembly insulates the refrigerator door interior. Replace if foam is compressed, torn, or missing to restore proper door insulation seal.

Seals refrigerator door to prevent warm air entry and maintain temperature. Replace if torn, cracked, or moldy. Confirm fit with your model number.

Seals refrigerator door to maintain temperature and energy efficiency. Replace if torn, cracked, or not sealing properly. Verify fit with model number.

Replaces the flap panel between French doors that seals the center gap. Order when original is cracked, broken, or won't stay closed properly.

Replace your worn right drawer guide to restore smooth opening and closing. Fixes binding and misalignment issues. Confirm fit with your model number.

Replacement door basket assembly for refrigerator doors. Restores storage for bottles, jars, and condiments. Replaces cracked, broken, or missing bins.

Replacement door basket assembly for bottom-mount refrigerators. Organizes items in the door compartment. Replace if cracked, broken, or missing.

Replacement door basket for refrigerator inner door. Holds bottles, jars, and condiments securely. Replaces cracked, broken, or missing baskets.

Mounts at the hinge to control door opening range and promote smooth closing. Replace if cracked, broken, or worn to restore proper door swing.

Center hinge assembly supports and pivots the middle door on your refrigerator. Replace if doors sag, misalign, or don't seal properly. Confirm fit.

Stabilizes rotating assemblies in your refrigerator to reduce wobble, wear, and noise. Replace when you notice excessive movement or grinding sounds.

Refrigerator door stopper attaches to the cabinet to limit door swing and prevent damage. Replace if cracked, broken, or missing to protect walls and cabinets.

Replaces a broken, cracked, or worn refrigerator door handle. Installs on the door exterior to restore a secure grip and finished appearance.

Replaces worn or broken rail guide assembly for refrigerator drawers. Restores smooth sliding and proper alignment when original guide is cracked or damaged.

Guides and supports refrigerator drawers as they slide in and out. Replace if your rail is cracked, broken, or worn to restore smooth drawer movement.

Drawer slide rail allows refrigerator shelves and drawers to glide smoothly. Replace if drawers stick, wobble, or won't close properly. Verify fit with model.

Fix intermittent power issues or electrical faults in your refrigerator with this connector rail. Secures wiring harness connections for reliable operation.

Replacement door bar for bottom-mount refrigerators. Installs on the interior door to hold items in place. Order a new one if cracked or broken.

Ice maker not ejecting cubes or making grinding noises? This drive gear transfers motor power to rotate the ejector. Easy DIY fix in 15 minutes.

Center hinge assembly supports and aligns your refrigerator door at the cabinet pivot point. Replace if door sags, misaligns, or won't seal properly. Confirm fit with your model number.

Secures components inside your refrigerator. Replace if broken or missing to prevent rattling and ensure proper part alignment. Confirm fit with model.

Spanner wrench tool for adjusting refrigerator door hinges. Enables precise up-and-down door alignment in tight spaces. Replace if lost or damaged.

Refrigerator door basket mounts inside the door to hold bottles, jars, and condiments. Replace when cracked, broken, or missing to restore storage.

Replacement door bin assembly that restores storage space on your refrigerator door. Needed when original bin is cracked, broken, or missing.

Upper hinge assembly supports your refrigerator door and ensures smooth opening. Replace when door sags or gaps appear. Verify fit with your model number.

Secures and guides your refrigerator door for smooth opening and closing. Replace if door sags, rubs, or won't seal properly. Confirm fit by model number.

Microwave door won't latch or release properly? This lever holder bracket secures the door lever assembly to restore smooth door operation. Easy DIY fix.

Connector link between refrigerator door and cabinet. Replace if original is broken, cracked, or worn. Essential for smooth door operation and alignment.

Replacement wire harness connector for refrigerators. Restores secure electrical connections between wiring and control components. Needed when damaged or worn.

Replacement door hinge spring for refrigerators. Provides tension for smooth door opening and secure closure. Replace if door sags or won't stay closed.

Fixes refrigerator not cooling or freezer too warm. This evaporator assembly circulates refrigerant to remove heat and restore proper temperatures.

Fix inconsistent cooling or temperature errors with this refrigerator thermistor assembly. Restores accurate temperature sensing for reliable operation.

Refrigerator won't cool or motor keeps shutting off? The overload protector prevents compressor damage by cutting power during overheating. Simple fix.

Support roller that mounts to the refrigerator base, allowing the unit to roll for cleaning or service. Replace if worn, broken, or causing uneven positioning.

Secures small moving parts and assemblies in refrigerators. Replace if the original pin is bent, broken, or missing to restore proper alignment.

Replacement drip tray for bottom-mount refrigerators. Installs beneath the unit to catch condensation. Replace if cracked, missing, or worn out.

If your refrigerator has uneven cooling or fan noise, the fan guide may be damaged. This part channels airflow properly and prevents blade rubbing.

Fixes refrigerator running warm or compressor area overheating. This fan motor assembly circulates air over the condenser coils to regulate temperature.

Protective front cover panel for refrigerators. Installs on the exterior to conceal components. Replace if cracked, broken, or missing.

Protects motor and drive components from debris and accidental contact. Shields internal machinery at the back of the tub for safer operation.

Replaces broken or missing refrigerator door stop. Limits door travel to prevent over-extension and maintain proper alignment and smooth operation.

Fridge door baffle won't stay flat when opening? This door restrainer spring keeps the baffle panel sealed. Common fix for French door models.

Secure loose internal components with this refrigerator mounting clip. Replace if parts shift or become misaligned. Verify fit with your model number.

Fix a stuck or non-working ice/water dispenser with this micro switch. Common cause of dispensers running continuously or not activating. Easy DIY repair.

Refrigerator making loud noise or not cooling evenly? This fan assembly circulates air to eliminate hot spots and restore consistent temperatures.

Fix a refrigerator that's not cooling properly or making loud noises with this evaporator fan motor. Accessed through the freezer's rear panel.

Cracked or missing light cover causing dim fridge lighting? This interior light lens protects the bulb and restores even illumination. Easy 5-minute fix.

Fix freezer light staying on or not turning on when door opens. This magnetic reed switch detects door position. Located on freezer wall, easy DIY.

Interior light won't turn off when door closes? This refrigerator door switch cover protects and aligns the switch for proper operation. Simple DIY fix.

If your refrigerator won't power on or has intermittent electrical issues, the power cord assembly may need replacement. Simple plug-in repair.

Fixes refrigerator not cooling, not running, or display issues. This main power control board manages all power distribution and electronic functions.

Refrigerator not cooling or running constantly? This power control board assembly regulates compressor and defrost cycles. Moderate DIY repair.

If your refrigerator display is dead, shows error codes, or behaves unpredictably, this sub PCB assembly processes inputs and controls specific functions.

No ice cubes? This ice maker assembly restores automatic ice production in your freezer. Moderately challenging DIY repair with basic tools.

Refrigerator not making ice or producing inconsistent cubes? This ice maker assembly restores automatic ice production. Moderate DIY repair in 1 hour.

Ice not dispensing or slow to fill? This auger motor controls ice movement from the icemaker to the dispenser. Fixes clumping and jamming issues.

Secures water supply line connections in your refrigerator. Replace if leaking, loose, or damaged to restore proper ice and water dispenser function.

Secures water tubing to prevent leaks and disconnections in your refrigerator's water line system. Replace if clip is broken, missing, or tubing moves freely. Confirm fit with your model number.

Refrigerator not cooling evenly or fan making noise? This fan grille assembly directs airflow and protects the evaporator fan for consistent temperatures.

Fix a refrigerator that's too warm or won't cool properly. This sensor control board reads temperature sensors and signals the main control board.

Ice bin cracked, warped, or causing weak dispensing and jams? This ice bucket assembly stores and delivers ice to your dispenser. Easy DIY repair.

Fix ice jams or slow dispensing with this refrigerator ice dispenser assembly. Mounts behind the door to guide cubes smoothly to the outlet.

Fix water leaking from your refrigerator door with a new water tank reservoir. Located behind the bottom door panel, this tank supplies your dispenser.

Pipe holder bracket for bottom-mount refrigerators. Secures refrigerant or water lines in place. Replace if cracked, broken, or missing to prevent lines from sagging or vibrating.

Plastic water supply tube for bottom-mount refrigerators. Connects water line to dispenser or ice maker. Replace if cracked, leaking, or broken.

Connects water tubing inside your refrigerator to supply the ice maker and water dispenser. Replace if cracked, leaking, or unable to hold tubing securely.

Plastic water supply tube that connects the main water line to your refrigerator's dispenser and ice maker. Replace if cracked, leaking, or damaged.

Replace cracked or damaged 1/4-inch plastic tubing for your bottom-mount refrigerator's water line. Essential for water dispenser and ice maker connections.

Fix no water or ice issues with this refrigerator water valve assembly. Controls water flow to icemaker and dispenser. Moderate DIY repair in 30-45 minutes.

Fix ice maker overflows, water leaks, or no water to dispenser. This inlet valve controls water flow from your supply line. DIY-friendly repair.

Fix poor water taste or slow flow with this refrigerator water filter assembly. Includes activated carbon blocks and internal water valve components.

Fix no ice, slow water flow, or leaking issues with this refrigerator water inlet valve. Controls water supply to ice maker and dispenser.

Plastic trim cap that snaps over exposed fasteners and mounting posts on your refrigerator. Replace if cracked, broken, missing, or discolored.

Fix water dispenser leaks or no ice with this inline water connector tube. Joins refrigerator water lines to restore secure flow. Simple repair.

Restores clean-tasting water and steady flow by filtering sediment and contaminants. Replace every 6 months or when flow weakens. Verify fit with your model.

Water line tube connector for bottom-mount refrigerators. Replaces cracked, leaking, or broken connectors that secure water supply tubing connections.

Fix water leaking from your refrigerator's filter area with a new filter head assembly. Solves filter connection issues and slow water flow. DIY repair.

Plastic clip secures tubing and pipes inside your refrigerator. Replace if cracked, broken, or missing to keep lines properly routed and organized.

Complete freezer door assembly for bottom-mount refrigerators. Replaces cracked, dented, or damaged freezer doors. Includes door shell and inner components.

Seals the ice bank door to prevent warm air from melting ice and causing clumping. Replace if ice melts, refreezes into clumps, or frost forms around the bin.

Freezer door won't lock or close securely? This lever cover protects the door lock mechanism from wear and impact damage. Easy DIY installation.

Replacement door hinge assembly for your refrigerator. Installs on the cabinet to support the door. Replace if cracked, bent, or worn for proper alignment.

Secures and supports refrigerator door pivot for proper alignment and smooth operation. Replace when door sags, seals poorly, or binds. Confirm fit with model.

Molded door shelf cover for the home bar compartment. Replaces cracked, broken, or missing covers. Installs on the refrigerator door for a finished look.

Roller component for the ice dispenser door handle on bottom-mount refrigerators. Replaces broken, worn, or missing rollers. Ensures smooth handle operation.

Replace your refrigerator air filter to reduce food odors and keep your fresh-food compartment smelling fresh. Installs directly in factory housing. Confirm fit.

Replaces worn air filter in your bottom-mount refrigerator to reduce odors and maintain fresh air in the food compartment. Replace when filter is clogged or every 6 months. Check model compatibility before ordering.

Replacement mounting stud for refrigerator door handles. Installs inside the door to secure handle assembly. Needed when stud is damaged or missing.