Parts for Ge PSA2200RWW02: 05 - Interior Parts (1) Parts

Fix microwave not starting or intermittent operation. This main control wiring harness restores reliable connections between control board and components.

This fan stirrer assembly is a direct-replacement air circulation component that helps move air inside the appliance cavity for more even temperature distribution and improved venting performance. Restores correct airflow when the original stirrer is worn or damaged. What it does:

• Circulates air to promote more even heating or cooling across the cavity
• Replaces cracked, broken, or missing stirrer blades that reduce airflow
• Helps reduce hot/cold spots and poor cooking or cooling performance
• Can eliminate unusual noises caused by a damaged or unbalanced stirrer

• Disconnect power to the appliance before starting any repair
• Remove access panels or interior liners as required to reach the existing stirrer
• Handle the plastic blades carefully to avoid damage; ensure proper alignment and secure mounting hardware
• Test appliance operation after installation and reassemble panels per OEM guidance

Replace a missing, bent, or damaged convection oven rack in your microwave. Provides a stable cooking surface for baking and roasting in convection mode.

Microwave runs but doesn't heat? The magnetron generates microwave energy to cook food. Replacing a failed magnetron restores heating performance.

Color: clear. Measures about 14 inches in diameter.

This plate side heater is the oven heating element that produces heat along the oven side to help maintain even cooking temperatures. Designed to restore proper heating when the side element is worn or failed. What it does:

• Heats the side area of the oven cavity to support even cooking and baking.
• Replaces a damaged or open side heating element that can cause weak or uneven oven heat.
• Helps address symptoms such as oven not reaching set temperature, uneven baking, or visible element damage.
• Works as a direct replacement when the original side plate heater fails.

• One plate side heater

• Disconnect power to the appliance at the breaker before starting any repair.
• Allow the oven to cool completely and use proper PPE when handling the element.
• Remove mounting screws and electrical connectors carefully; note wire locations for reinstallation.
• Reconnect securely and test the oven on a low heat setting to verify proper operation.

Fix uneven heating in your microwave. This stirrer fan cover protects the component that distributes microwave energy. Simple repair, under 10 minutes.

Truss head tapping screw for microwave interior and exterior assembly. Replaces lost, stripped, or corroded screws during repairs or maintenance.

Microwave won't heat or stops working? This thermal cutoff thermostat prevents overheating damage. DIY-friendly repair, typically takes 10-15 minutes.

This ceramic filter replaces the in-line/refrigerator water filter element to reduce sediment and particulates for clearer water and ice. It helps restore normal water clarity and improves taste when the original element is clogged or aged. What it does:

• Traps sediment and mineral particles to reduce cloudiness in water and ice
• Helps improve taste and appearance by removing particulate contaminants
• Can relieve reduced water flow caused by a clogged filter element
• Suitable for use in compatible refrigerator/ice maker water lines and inline filter housings

• One ceramic filter element

• Turn off the water supply and dispense remaining water before replacing the element
• Follow the refrigerator or inline filter housing instructions for removal and seating to avoid leaks
• Inspect O-rings and seals; replace if worn or damaged

This Miraclon heater replaces a failed heating element to restore your appliance's ability to produce heat. Designed as a direct-fit component to return normal temperature performance and reliable operation. What it does:

• Heats air or fluids as part of the appliance's thermal system
• Replaces worn or non-working heaters that fail to warm properly
• Stops symptoms like no-heat, weak heat, or uneven temperature
• Works with the appliance's existing mounts and connections when compatible

• Disconnect power before access; follow manufacturer service manual for disassembly
• Handle element carefully to avoid damage to terminals or insulation
• Verify correct part number and fit before installation

Fix poor cooling and ventilation issues in your microwave with this fan assembly. Restores proper airflow and temperature regulation. Moderate DIY repair.

This circulation motor powers air movement inside the appliance to maintain proper airflow and even temperatures. Replacing a failed motor restores circulation for more consistent cooling and reduces noise or performance issues. What it does:

• Spins the fan to circulate air through the cooling/ventilation path
• Helps maintain even temperatures and proper airflow in the appliance
• Commonly replaced when airflow is weak, cooling is uneven, or the motor is noisy
• Stops operation if the motor fails, which can lead to frost buildup or reduced performance

• Disconnect power to the appliance before starting any repair
• Access and mounting steps vary by model; follow the appliance's service manual or wiring diagram
• Handle wiring connectors carefully and confirm proper fan rotation before reassembly

Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.

Binding head screw secures panels and brackets inside your microwave or wall oven. Replace if screw is stripped, missing, or damaged during service.

Mounting screw that secures the power control module inside your microwave. Replace if screw is stripped, missing, or damaged during service work.

Fix microwave shutdowns or uneven heating with a new temperature sensor. Restores accurate temp regulation and consistent cycle timing. DIY repair.

This AC fan motor is the refrigerator fan motor that circulates air to maintain proper cooling and airflow. It replaces a worn or failed fan motor to help restore steady airflow and consistent temperatures. What it does:

• Spins the evaporator/condenser fan blade to move air through the refrigerator cooling system
• Restores airflow when fan has stopped running or runs intermittently
• Reduces unusual fan noise or vibration caused by a failing motor
• Helps correct uneven cooling or frost build-up linked to poor air circulation

• Disconnect power to the appliance before starting any work
• Handle the fan blades carefully to avoid bending or injury
• Verify fan blade seating and clearances during reassembly to prevent rubbing

The Thermostat is an OEM part for GE microwaves. This part regulates the temperature within the microwave, ensuring it operates within safe and efficient temperature ranges. It helps prevent overheating by monitoring and controlling the internal temperature, protecting both the appliance and the user.

Causes of a bad thermostat can include wear and tear over time, electrical malfunctions, or damage from power surges.

Symptoms of a bad thermostat include:

• Microwave not heating properly
• Overheating or shutting off unexpectedly
• Error codes related to temperature issues
• Inconsistent cooking times

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Microwave not heating food? The high voltage transformer powers the magnetron. Common failure part when microwave runs but won't heat properly.

Microwave not heating? High voltage capacitor stores energy to power the magnetron. DIY repair typically takes 30-60 minutes with proper safety care.

Fix a microwave clock or timer that won't advance with this AC synchronous motor. Restores gear-driven timing functions. Straightforward repair.

Suction guide bracket that positions and supports the suction component inside your microwave. Replace if cracked, broken, or missing to restore proper alignment.

Replaces a cracked, damaged, or missing trim ring on your microwave. Secures surrounding components and restores proper fit and finish around the unit.

Fix a microwave turntable that won't spin or turns intermittently. This motor drives the glass tray for even heating. DIY repair in 20 minutes or less.

Connects the motor to the glass tray for smooth turntable rotation. Replace if your shaft is broken, worn, or causing the tray to wobble or scrape.

Nonstick metal tray for microwave/convection models. Replaces warped, worn, or missing trays to restore stable food placement and even cooking results.

Nonstick grille tray pan for microwave ovens with broiling/grilling capability. Replace your cracked, worn, or missing tray for even cooking results.

If your microwave fan won't run or makes excessive noise, this fan motor module restores proper ventilation. Common repair for cooling system failures.

Microwave not heating? A failed diode prevents the magnetron from generating heat. This high-voltage component converts AC to DC power. DIY repair.

Fix intermittent heating or control issues with this microwave wiring harness. Restores reliable electrical connections between control and heating components.

This heater sheath is the protective metal sleeve that surrounds a dryer/oven heating element, helping protect the element and focus heat where needed for reliable appliance heating performance. What it does:

• Protects and supports the heating element inside the appliance
• Helps direct and contain heat for efficient operation
• Can prevent direct contact between the element and surrounding components
• Commonly replaced when the sheath is corroded, dented, or damaged
• Linked to uneven heating or visible element damage

• High-level replacement only; disconnect power before servicing to avoid shock hazard
• Inspect surrounding components (element, terminals, mounting clips) and replace any damaged parts
• Use proper fasteners and ensure sheath is seated securely to avoid contact with other components

Fixes weak ventilation, excessive noise, or overheating in your microwave. This blower wheel restores proper airflow to clear steam and cool components.

Fix a loose or rattling capacitor with this microwave capacitor bracket. Secures the high-voltage capacitor in place. Simple repair for most DIYers.

Hexagon nut for microwave interior assembly. Secures components and panels in place. Replace if stripped, corroded, or missing during repairs.

Truss head tapping screw for microwave assembly. Secures internal components and panels. Replace if screw is stripped, missing, or lost during repair.

Truss-head self-tapping screw for securing microwave panels, trim, and brackets. Replace lost or damaged mounting screws to restore fit.