Jenn-Air Dishwasher Parts

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.

Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.  

Symptoms of a bad Diverter Motor include:

• Dishes not being cleaned properly due to insufficient water reaching all areas.
• Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
• Error codes displayed on the dishwasher that are related to water distribution functions.
• Leakage from the dishwasher base 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This upper dishrack track mounts to the dishwasher tub wall and provides a smooth glide path for the rack rollers. Replacing a damaged track restores easy in-and-out movement and helps keep the upper rack aligned and secure.

• Guides and supports the upper dishrack as it slides in and out
• Maintains rack alignment to prevent binding or derailing
• Typical failure signs: rack jams or falls off, rough/squeaky travel, visible cracks or breaks in the track
• Can keep the rack from fully sliding in, making the door harder to close

• Disconnect power and turn off the water supply before servicing
• Remove the upper rack by releasing the end caps/stops
• Unfasten the old track from the tub (screws/clips), then position and secure the new track
• Reinstall the rack and end caps; verify smooth rack travel before restoring power and water

Replacement pump gasket with silicone sealing material that restores a watertight seal between the pump and housing. Helps stop leaks at the pump area and prevents water pooling under the appliance.

• Seals the pump to the housing to help prevent water leaks and drips.
• Common repair for visible water under the appliance or leaks coming from the pump area.
• Silicone sealing material provides a flexible, water-tight interface that conforms to the pump housing.
• Designed to replace the factory pump gasket for a direct fit and proper sealing.

• Disconnect power and water supply before beginning any repair.
• Remove the pump assembly to access and replace the gasket.
• Clean and dry mating surfaces before installing the new gasket; seat evenly to ensure a full seal.

For belt driven models

This fine screen is the small mesh filter that sits in the dishwasher sump to catch food particles and help protect the pump and wash system. It keeps debris from circulating so dishes rinse more effectively. What it does:

• Traps food and debris in the sump to prevent clogging and pump damage
• Helps maintain proper water flow for consistent wash and drain performance
• Reduces risk of food redepositing on dishes during cycles
• Commonly replaced when torn, heavily clogged, or missing

• One fine mesh sump screen

• Turn off power and disconnect the dishwasher before servicing
• Remove the lower dish rack and access the sump area to replace the screen
• Inspect surrounding seals and housing for damage while servicing
• No special tools typically required; handle mesh gently to avoid deformation

This upper wash arm directs rotating spray to the dishwasher's top rack to help improve cleaning coverage and reduce food/residue on upper-rack dishes. Fits as the rotating upper spray arm assembly for compatible dishwashers. What it does:

• Rotates and sprays water across the upper rack to help remove stuck-on food and rinse dishes.
• Helps correct weak or uneven spray patterns from the top rack.
• Can reduce spotting and areas that remain soiled when the upper arm is damaged or clogged.
• Replaces a worn, cracked, or clogged upper spray arm to restore proper spray action.

• Always disconnect power to the dishwasher and turn off the water supply before servicing.
• Remove the upper rack to access the arm; unclip or unscrew the old arm and install the replacement until it seats/threads securely.
• Clear any debris from the mounting area and ensure the arm spins freely before running a test cycle.
• Run a short rinse or quick cycle to verify correct spray pattern and fit.

Right-side basket lid for top-load washers. Replaces a cracked or damaged right-side lid to help contain laundry, reduce splashing and restore the basket cover so the washer closes and operates as intended. What it does:

• Covers the right side of the inner wash basket and helps keep clothes from catching on the basket edge.
• Helps reduce water splash and keeps items contained during the wash.
• Restores proper fit and alignment of the basket cover area that may affect lid closing.
• Used when the original right-side lid is cracked, warped, or broken.

• Disconnect power and water supply before beginning service.
• Handle edges carefully; wear gloves to avoid sharp edges on broken parts.
• Installation typically requires removing the outer cabinet or basket access panels and securing the lid with existing fasteners — follow the model's service manual for exact steps.

This replacement silverware basket holds forks, knives and spoons in the dishwasher lower rack so utensils stay upright and separate for better cleaning and easier unloading. It's a direct-fit interior basket designed to restore secure utensil loading. What it does:

• Keeps silverware and small utensils contained so pieces don't fall through or block the spray arms
• Separates items to improve water flow and cleaning coverage
• Prevents loose utensils from banging and potentially damaging dishes
• Replaces cracked, broken, or missing baskets that allow utensils to shift during the cycle

• Drop into the lower rack — no tools required for typical swap-out
• Position basket so it sits flat and does not interfere with rack movement or spray arm rotation
• Avoid overloading; place sharp utensils point-down or bundle separately to reduce hazard when unloading
• For appliance repairs beyond simple replacement, disconnect power and water before servicing

This chopper assembly replaces the food-chopping component in compatible countertop food processors, restoring even chopping and diced results. It helps get blades turning and keeps food processing performing as intended. What it does:

• Spins and chops food inside the processor bowl for consistent results
• Restores proper cutting when chopping is uneven or not happening
• Helps eliminate food buildup that causes noisy or inefficient operation
• Works with the existing drive coupling to transfer motor power to the blades

• Disconnect power and remove the processor bowl and lid before servicing
• Handle blades carefully — they are sharp; wear cut-resistant gloves
• Ensure the part seats fully on the drive coupling and locks into place before use
• Test operation with small amounts of food after reassembly; stop immediately if unusual noise or resistance occurs

Color: Black

This replacement door handle restores a solid, comfortable grip for opening and closing the refrigerator door. It replaces cracked, broken or loose handles so the door operates safely and reliably. What it does:

• Provides a secure gripping surface to open and close the refrigerator door
• Replaces cracked, broken or missing handles that make the door hard to use
• Restores proper engagement with the door hardware for reliable operation
• Helps prevent accidental drops or further damage from a failing handle

• Disconnect power to the appliance or unplug the refrigerator before starting any work
• Remove any trim or end caps to access mounting screws; retain original hardware unless stated otherwise
• Hand-tighten mounting screws, then snug—do not overtighten to avoid cracking the handle

This replacement left-side lid for the silverware basket restores coverage and helps keep utensils contained during dishwasher cycles. It matches OEM fit and appearance so the basket functions as designed. What it does:

• Covers and secures utensils in the left section of the silverware basket
• Helps prevent small items from shifting or falling through during wash cycles
• Restores proper basket alignment for even water flow and rinsing
• Reduces the chance of utensil contact with rotating spray arms

• Snap-in replacement; no special tools typically required
• Remove the silverware basket to access and align the lid before snapping into place
• Inspect surrounding basket clips/rims for damage and replace if worn to ensure secure fit
• Disconnect power to the appliance and follow the manufacturer's safety instructions before servicing

This panel bag assembly seal creates a secure, flexible gasket between the appliance panel and bag assembly to help maintain proper sealing and prevent leaks. It restores the intended fit for reliable operation. What it does:

• Seals the junction between the bag assembly and the panel to limit air or dust escape
• Helps maintain suction/containment performance when the bag is installed
• Reduces vibration or rattling by providing a snug fit
• Addresses common symptoms like visible gaps around the bag panel, escape of dust/debris, or panel movement

• One panel bag assembly seal

• Disconnect power and remove any batteries before beginning service
• Remove the panel or bag assembly per the appliance service instructions to access the seal
• Replace the old seal with the new seal, ensuring it seats fully in the channel or mounting groove
• Inspect surrounding clips and fasteners and reassemble carefully; test operation after reinstallation

A stainless pushnut used to secure shafts, studs, or small components with a quick, push-on retainer that resists corrosion. Keeps parts fastened without threading or additional hardware for a clean, low-profile fit. What it does:

• Acts as a push-on retaining nut to hold shafts, studs, or fittings in place
• Provides a corrosion-resistant stainless finish for wet or high-humidity areas
• Prevents components from sliding off axles or posts during normal operation
• Commonly used on control shafts, knobs, or small internal assemblies

• Turn power off and unplug appliance before servicing to avoid shock or injury
• Push onto the post or shaft until fully seated; a firm press or light tap may be required
• Use appropriate hand tools or pliers with protection to avoid damaging the part
• Replace with identical part number to ensure fit and function