Jenn-Air Range / Cooktop / Oven Gasket & Seal

Replacement gasket that restores a tight seal to the appliance door and helps prevent water or air leaks. Replaces worn, cracked, or compressed seals so the door closes properly and reduces moisture or heat loss. What it does:

• Seals the door opening to stop leaks of water, steam, or heated air.
• Helps maintain proper temperature and efficiency by preventing air exchange.
• Reduces condensation, odors, and cycling caused by a poor seal.
• Common signs you need this part: visible gaps or damage, leaks around the door, excess moisture, or poor heating/cooling performance.

• Disconnect power and water (if applicable) and allow the appliance to cool before starting.
• Clean and dry the mating surface to ensure a proper fit; remove old adhesive or debris.
• Align the gasket into the door channel or groove and press evenly; avoid stretching the material.
• If the door or mounting hardware is bent or damaged, repair those parts before installing the gasket.

A flexible pan seal that helps keep the refrigerator's drain pan and base area sealed to reduce leaks and contain condensation. Replaces a worn or damaged gasket to help prevent water pooling and odors. What it does:

• Seals the drain/condensate pan to the cabinet base to limit water leaks and vapor escape
• Directs condensate toward the drain so water drains properly instead of pooling
• Helps reduce musty odors from standing water in the pan area
• Commonly replaced when you see water under the appliance, pooling inside the cabinet, or visible gasket damage

• Disconnect power to the appliance before beginning any repair
• Remove the appropriate access panels or kickplate to reach the pan area per your model's service instructions
• Clean the pan and mating surfaces thoroughly before installing the new seal for a proper fit
• Press the seal into place; do not force or use solvents/adhesives unless specified by the OEM

This small burner gasket seals the cooktop burner to help keep spills and debris out of the burner cavity for more reliable ignition and easier cleaning. It replaces a worn or brittle gasket to restore the burner's fit and seal. What it does:

• Creates a tight seal between the cooktop and the small surface burner to help prevent food, liquid, and debris from entering the burner area
• Helps maintain consistent burner alignment for reliable ignition and even heating
• Reduces the need for frequent deep cleaning by blocking spill penetration
• Commonly replaced when the gasket is cracked, flattened, burned, or missing

• One small burner gasket

• Disconnect power to the appliance before servicing; for gas ranges, turn off the gas supply when applicable
• Remove burner components and replace gasket, ensuring it seats evenly around the burner opening
• Do not force or stretch the gasket; inspect surrounding components for damage and clean surfaces before installing

This switch seal is a small rubber gasket that protects a control or door switch from moisture and debris, helping maintain reliable operation and prevent damage to the switch assembly. What it does:

• Creates a moisture- and dust-resistant barrier around a switch to reduce shorting and corrosion
• Helps keep switches operating smoothly by blocking contaminants that cause sticking or intermittent contacts
• Supports safe electrical performance by keeping water away from switch terminals and housings
• Common symptom linkage: switch malfunction, intermittent control, or moisture-related failures near switch area

• Disconnect power to the appliance before inspecting or replacing the seal
• Remove surrounding trim or components carefully to avoid damaging the switch or housing
• Confirm correct orientation and full seating of the seal during reassembly for an effective barrier
• If the switch shows damage or corrosion, replace the switch assembly as well

Seals the appliance door to prevent leaks and keep the interior working as intended. Replace a cracked, torn, or hardened gasket to stop leaks, reduce odor and mold, and restore a reliable door seal. What it does:

• Forms a tight seal between the door and cabinet to prevent water, air, or heat loss
• Stops common symptoms like visible cracks or gaps, water pooling, and persistent odors
• Restores proper containment for cleaning, heating, or washing cycles
• Matches the OEM channel/retainer design for a secure fit

• Disconnect power and water before beginning any repair
• Remove the old gasket, thoroughly clean the mounting area, then seat the new gasket into the door channel or retainer
• Work the gasket evenly around the door; avoid overstretching and ensure all beads/clips are fully engaged

This replacement door seal restores the fridge door's airtight closure to help maintain proper cooling and reduce energy loss. Designed to fit original-style openings, it keeps cold air in and warm air out for reliable food preservation. What it does:

• Creates an airtight seal along the refrigerator door edge to maintain consistent interior temperatures
• Helps prevent frost buildup and reduces strain on the compressor by improving efficiency
• Addresses common symptoms like warm spots near the door, excess frost, or a door that won't close snugly
• Fits into the door channel and compresses when the door is closed to form a tight barrier

• Replacement may require door removal and trim manipulation; follow your model's service instructions
• Inspect the door channel and mounting flange for damage or debris before installing the new seal
• Warm the seal slightly to ease installation and ensure a uniform fit; avoid open flames or excessive heat
• Test the door for a consistent seal after installation and make any hinge/strike adjustments if needed

This window gasket seals the appliance door around the glass window to help maintain proper temperature and contain heat, steam, and odors. It restores a tight door closure for safer, more efficient operation. What it does:

• Creates a seal between the door frame and window glass to reduce heat and steam escape
• Helps prevent moisture and food debris from entering the door cavity
• Reduces rattling or vibration from a loose door window area
• Supports consistent cooking or drying performance by maintaining internal temperature

• One window gasket

• Disconnect power (and gas if applicable) before beginning any repair
• Handle door glass and surrounding trim carefully; wear gloves and eye protection
• Remove door or door panel per manufacturer instructions to access the gasket mounting channel
• Replace any clips or adhesive as needed and verify the gasket seats evenly around the entire window before restoring power

A general-purpose appliance adhesive used to bond and seal interior and exterior components. Restores secure attachment of trim, insulation, and small panels so parts stay in place and function properly. What it does

• Bonds loose trim, gaskets, and small plastic or metal panels to prevent shifting and rattles
• Seals minor seams and gaps to improve fit and finish
• Helps reattach insulation or padding that has come unglued
• Reduces noise from vibrating parts by securing components

• Clean and dry surfaces thoroughly before applying for the best bond
• Use in a well-ventilated area and avoid skin or eye contact; follow product safety directions
• Apply sparingly and allow full cure time per manufacturer instructions before reassembling

This small pan seal replaces a worn or damaged sump/pan gasket to help stop leaks and keep water inside the appliance's drain area. It restores a proper seal so the appliance can drain without pooling or seepage. What it does:

• Seals the small pan/sump area to prevent water from leaking onto the floor
• Helps maintain proper drainage and reduces pooling under the appliance
• Restores a tight gasket where cracks, compressions, or wear allow seepage
• Commonly used when you see water under the unit, drips after cycles, or visible gasket damage

• Disconnect power and water supply before servicing the appliance
• Remove access panels and clean the mating surfaces before installing the new seal
• Press the seal into place evenly; ensure it sits flush in the pan/sump channel
• Inspect surrounding parts for damage and replace any brittle or warped components

This door gasket seals the oven door to help keep heat and cooking odors inside the oven cavity for more even cooking and improved energy efficiency. Durable rubber forms a continuous seal around the oven door opening. What it does:

• Replaces a worn, torn, or brittle gasket to stop heat from escaping around the oven door
• Helps maintain consistent oven temperatures for more even baking and roasting
• Reduces excess heat and smoke in the kitchen caused by a failing door seal
• Prevents food odors from leaking out of the oven cavity

• One oven door gasket

• Disconnect power to the appliance and make sure the oven is completely cool before starting
• Remove the oven door or open as recommended by the manufacturer to access the gasket channel
• Clean the gasket channel of debris and old adhesive before seating the new gasket for a proper seal
• Press the gasket into the retainer evenly around the door; replace only with the exact part number for best fit