Jenn-Air Wall Oven Parts

This is a replacement control knob that restores a worn or broken selector on a household range or cooktop. It provides a secure grip for turning controls so settings stay accurate and easy to change. What it does

• Replaces a stripped, cracked or missing control knob so you can select temperature or function again
• Restores tactile grip and clear position alignment for reliable control
• Stops slipping or wobbling that can prevent accurate adjustments
• Simple push-on design aligns to the control shaft for consistent operation

• Disconnect power to the appliance before servicing controls to avoid injury
• Most installations are push-on: pull the old knob straight off and push the new knob fully onto the splined shaft
• If the knob is tight, use a steady pull or a knob-puller tool to avoid damage
• Align pointer/indicator to the control scale before using

This heating element kit replaces a failed heating element to restore normal heating in compatible laundry or cooking appliances. It provides the core heating component needed to get your appliance producing heat again. What it does:

• Replaces a damaged or burned-out heating element that stops the appliance from heating
• Helps resolve symptoms like no heat, weak or inconsistent heating, or tripped thermal cutouts
• Restores the appliance's ability to reach and maintain operating temperatures for normal cycles
• Works as the direct replacement heating component shown in OEM parts listings

• One heating element kit as shown

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock risk
• Handle the element and terminals carefully to avoid bending or damaging mounting tabs
• Confirm correct terminal connections and secure mounting per the appliance wiring diagram

This replacement burner control knob restores a worn or damaged stove/range control so you can set heat levels precisely. Durable black finish matches OEM appearance and provides a secure grip for safe burner adjustments. What it does:

• Replaces a broken, cracked, or stripped burner control knob so the control shaft can be turned smoothly
• Fits short-shaft control stems; engages the splines to set burner heat from low to high
• Helps stop slipping or accidental setting changes caused by worn knobs
• Common symptom fix: knob won't stay on, won't turn, or spins without engaging the control

• Before installing, disconnect power to the appliance and shut off gas supply if applicable
• Align the knob splines with the control stem and push firmly until seated; do not force or hammer
• Wear gloves to avoid cuts on sharp edges and test operation after installation

Color: chrome. Measures about 2 inches in diameter.

Replacement burner switch that controls the heat level for an electric range surface element, restoring proper temperature selection and burner responsiveness. Use this switch when a burner is unresponsive, stuck at one setting, or heats erratically. What it does:

• Regulates power to a surface element so you can select low-to-high heat settings.
• Replaces a failed surface control switch that prevents burners from changing temperature.
• Common symptoms it can fix: burner won't heat, stuck on one setting, no click/response, or inconsistent heat.
• Works as the control interface between the knob and the element on compatible electric ranges.

• Disconnect power at the breaker or unplug the range before starting any repair.
• Photograph or label wires before removal and match terminals exactly when installing the replacement.
• Use insulated tools and avoid contact with live terminals; restore power only after reassembly.

This replacement grate cartridge secures and centers a cooktop burner grate so cookware sits level and burners perform as intended. Durable design restores stable support for pots and pans on compatible gas ranges. What it does:

• Replaces a worn or broken grate cartridge that lets the grate rock or sit unevenly
• Helps keep the burner grate properly aligned over the burner for even cooking
• Prevents cookware from wobbling or shifting during use
• Restores proper fit where the grate attaches to the cooktop surface

• One grate assembly (cartridge) as shown

• Turn off and disconnect power and gas supply; allow the range to cool completely before servicing
• Remove the burner grate and lift out the old cartridge; align tabs and snap or seat the new cartridge into place
• Handle enamel-coated grates carefully to avoid chipping; use soft padding if needed during installation

One knob per each package. Please order additional knobs if needed.

This bezel knob replaces a worn, cracked or missing control knob bezel to restore a clean finished look and reliable control feel. It provides the tactile grip needed to select settings easily. What it does:

• Covers and protects the control shaft while providing a gripped surface for turning and selection
• Replaces cracked, faded or broken bezels that make controls hard to use or look worn
• Restores proper alignment and tactile feedback for accurate setting selection
• Matches the original black finish for a consistent appearance

• Always disconnect power (and gas when applicable) before servicing controls.
• Most installs simply pull the old bezel off and push the new one onto the control shaft—align splines before seating.
• If the control shaft or switch is damaged or loose, replace the underlying control assembly rather than forcing the knob.

Replace a damaged or unsteady cooking surface with this burner grate. It supports pots and pans at the proper height above the burner, restoring stable, level support on your gas cooktop or range when the original grate is worn or broken.

• Provides sturdy support for cookware over the surface burner
• Maintains the correct clearance between burner and pan for consistent heating
• Replaces grates that are cracked, bent/warped, or have worn feet causing wobble
• Helps prevent rocking or instability of pots and pans during cooking

• Allow the cooktop/range and grate to cool completely before handling
• Lift off the old grate; clean the surface; align and place the new grate over the correct burner
• Ensure the grate sits flat and stable—do not force into place
• Refer to your owner's manual for care and cleaning recommendations

Color: Black

Color: Stainless

Color: White. For black order JEA8120ADBA. This Designer Line Jenn-air radiant module cartridge has a 3 spade and 1 round terminal on the end of its base. It features an ultra quick start radiant element with a glass ceramic surface.

This wok ring is a burner accessory that stabilizes round-bottom woks on gas range grates, letting you use wok-style cookware safely and maintain even heating. Durable design keeps cookware centered over the flame. What it does:

• Supports round-bottom woks and small, curved cookware on a gas burner
• Helps keep cookware stable to prevent tipping and uneven cooking
• Places the wok closer to the flame for improved heat contact
• Fits into the burner grate without tools for simple placement

• Install only on a compatible gas range grate; ensure the range is off and cool before placing the ring
• Position the ring securely in the grate recess so the wok sits level over the burner
• Inspect for cracks or warping; replace if damaged to avoid instability

This high-limit thermal fuse cuts power when temperatures exceed safe levels to protect heating circuits and prevent fires. Replace a failed fuse to restore proper thermal protection and help your appliance heat and run correctly. What it does:

• Opens the circuit if the heater area overheats to protect the appliance from thermal damage
• May resolve no-heat or intermittent-heat symptoms in dryers and other heated appliances
• Can stop an appliance from running if the thermal cutoff is blown
• Acts as a one-time safety device that must be replaced if it has opened

• Disconnect all power before accessing or replacing the part
• Verify the failed fuse with a continuity test; a blown fuse will show no continuity
• Replace with the exact part number to ensure correct temperature rating and fit
• If the thermal fuse has blown, inspect and repair the underlying cause (venting, air flow, or heating element) before return to service

This replacement infinite control knob lets you precisely adjust the heat level on an electric cooktop or range surface element. It restores a secure grip and clear pointer for accurate temperature control during cooking. What it does:

• Fits onto an infinite (infinite-tap) surface element control shaft to select heat settings
• Provides a clear pointer for accurate selection of low-to-high settings
• Replaces worn, cracked, or stripped knobs that slip or won't turn
• Helps stop intermittent or unreliable control caused by a damaged knob

• Remove power to the appliance before servicing for safety
• Pull off the old knob straight from the control shaft; push the new knob onto the shaft until secure
• Confirm proper fit and full range of motion before restoring power