Jenn-Air Wall Oven Parts

This oven rack restores a cooking surface inside compatible smart ovens so cookware sits level and slides smoothly. It replaces a missing, bent, or worn rack to help you use all oven positions safely and evenly. What it does:

• Provides a stable platform for pots, pans, and bakeware
• Slides into oven side supports for easy loading and removal
• Replaces warped or damaged racks that cause uneven cooking or unstable cookware
• Resists oven heat and common wear from regular use

• Allow the oven to cool completely before installing or removing the rack
• Slide the rack into the desired pair of side supports until seated; do not force or bend
• Use gloves or a towel to protect hands from sharp edges and heat residue
• If rack does not align or slide smoothly, inspect oven guides for damage before using

This cast-iron burner grate supports cookware above a gas burner, restoring a stable cooking surface and proper heat distribution. It replaces a cracked, warped, or missing grate so pots and pans sit securely on the cooktop. What it does:

• Provides a stable platform for cookware over a gas burner to improve cooking consistency.
• Keeps cookware centered over the flame and helps prevent tipping or sliding.
• Replaces grates with chips, cracks, or excessive wear that can interfere with heating.
• Helps maintain safe spacing between flame and cookware for efficient operation.

• Only install when the range is cool and all controls are OFF; disconnect power/gas per manufacturer instructions if required.
• Remove old grate, clean cooktop surface, and set new grate into position; no special tools usually required.
• Ensure the grate sits flat and stable before use; do not use if warped or damaged.
• Clean with non-abrasive cleaners and dry thoroughly to help prevent surface corrosion.

 The Thermostat is an OEM part for Whirlpool microwaves. It is a temperature-sensitive component that monitors heat levels inside the oven cavity during operation.

Causes may include damage from exposure to moisture or debris over time that disrupts accurate readings.

Symptoms of a faulty thermostat include:

• Incomplete or inconsistent heating with uneven hot/cold spots
• Food not reaching expected doneness after preset times
• Overheating errors or cycle interruptions

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This door insulation replaces the foam panel inside a refrigerator or freezer door to help maintain proper internal temperatures and improve energy efficiency. It restores the thermal barrier behind the inner door panel for more consistent cooling. What it does:

• Replaces the foam thermal barrier inside the door to help keep cold air in and warm air out
• Helps reduce frost buildup and uneven cooling caused by damaged or missing insulation
• Supports gasket sealing by filling the cavity behind the inner door liner
• Can reduce run-time caused by air leakage around a compromised door

• One door insulation panel

• Disconnect power before starting and work with the appliance empty and doors open
• Remove the inner door liner or access panel to access the insulation cavity
• Handle edges and metal parts carefully; wear gloves and eye protection
• Only use OEM-specified fasteners and replace any damaged clips or sealing foam as needed

The Rear Oven Door Glass is an OEM part for Whirlpool ovens. This glass panel is installed on the inside of the oven door and is essential for providing a heat-resistant viewing window, allowing users to monitor the cooking process without opening the door. Measuring about 20 inches by 10 inches, this quality glass keeps heat in the oven and provides a clear view for easy baking.

Symptoms of a bad Rear Oven Door Glass include:

• Cracks or chips in the glass,
• Visible streaks or fogging between glass layers that can't be cleaned,
• A loose fit that may cause heat to escape or the glass to rattle during oven use.

Causes of rear oven door glass damage typically include thermal stress from high heat, impact from closing the door too forcefully, or accidental bumps with pots or pans.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Surface Element is an OEM part for Whirlpool ranges. It is responsible for providing the heat necessary for cooking on the stovetop. Designed to fit seamlessly into the range, this element ensures even heating and efficient energy use, allowing for precise temperature control during cooking.

Causes of a bad surface element can include normal wear and tear, electrical faults, or damage from cookware. Over time, repeated heating and cooling cycles can cause the element to degrade, while physical impacts or spills can also lead to malfunction.

Symptoms of a bad surface element include:

• Inconsistent or uneven heating
• The element not heating up at all
• Visible damage or burn marks on the element
• Sparks or unusual noises when the element is turned on

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: 3000/1400W - Left front element

The Oven Control Board is an OEM replacement part for Whirlpool ovens. Includes overlay. This control board manages essential oven functions, including temperature regulation, bake and broil elements, and the display of time and settings. It serves as the central interface, ensuring precise operation of your oven.

Symptoms of a bad Oven Control Board include:

• The oven not heating properly or at all
• The display showing error codes or being blank
• Unresponsive buttons or controls
• Inconsistent cooking temperatures

Causes of a failing Oven Control Board can include power surges, overheating, or general wear and tear over time. Electrical component failures or damage to the circuit board can also render it inoperable.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Knob is an OEM part for Whirlpool ranges. It allows the user to adjust the temperature and settings of the burners or oven. This knob is designed to fit securely on the control shaft, providing a reliable interface for selecting various cooking functions.

Over time, control knobs can become worn or damaged due to frequent use, exposure to heat, or accidental impact. When the knob becomes faulty, it can hinder the ability to control the appliance accurately.

Symptoms of a bad control knob include:

• Difficulty turning the knob
• The knob slipping or not staying in place
• Inaccurate temperature control
• The knob not engaging the control shaft properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: black. It measures about 11-1/2 inches wide by 20 inches deep.