Kenmore / Sears Range / Cooktop / Oven Control Board

This main electronic control board regulates the refrigerator's core functions so the unit runs reliably. Replacing a failed control board restores electronic control over cooling, defrost cycles, lights and user interface responses. What it does:

• Manages compressor and fan operation to control temperature
• Runs automatic defrost and associated heater timing
• Powers/display and processes user inputs for settings and diagnostics
• Coordinates dispenser, lights and other electrically controlled features
• Can stop erratic or intermittent operation caused by a faulty control board

• Disconnect power to the appliance before starting work to avoid shock
• Handle the board carefully and avoid touching contacts; use anti-static precautions if available
• Verify connector alignment and secure all wiring harnesses during reassembly

This electronic main control board regulates key appliance functions and restores control when the unit's original board fails. Replacing a faulty board can return responsive controls and normal cycling without replacing major components. What it does:

• Manages compressor, fans, defrost heater and timing, and temperature control logic
• Interprets user inputs from the control panel and runs display indicators
• Communicates status and error signaling to other modules in the appliance
• Common symptoms: unresponsive controls or display, unit not cooling or not running, erratic cycling, or error codes

• Disconnect power to the appliance before starting any work
• Handle the board carefully and avoid static discharge; use ESD protection if available
• Transfer any mounting hardware or harnesses from the old board unless new ones are explicitly supplied

This electronic control board regulates the appliance's functions and user interface so cycles and settings respond correctly. Replacing a faulty board restores reliable control and display operation when the original board has failed. What it does:

• Interprets user commands and sends signals to motors, valves, and other components
• Controls cycle timing, temperature, and other programmed functions
• Can cause loss of display, non-responsive buttons, or failure to start when defective
• May trigger erratic or unexpected operation if internal electronics fail

• One electronic control board as shown

• Disconnect power (unplug or switch off breaker) before beginning work
• Handle the board by its edges and avoid static discharge (use an anti-static wrist strap if available)
• Verify appliance model and part number match before installing

This replacement part is a clock. This part is found on various appliances and is able to keep track of time during cooking or baking. The part may also be used as an alarm so that the user knows when to take items out of the oven.A new clock might be needed if the timer seems too slow. If the current clock is no longer displaying the correct time and cannot be changed, it might not be working properly and should be replaced as the settings are entirely off. This should be an easy repair and will most likely require only a screwdriver.This is a genuine OEM replacement part made by Frigidaire, sold individually. The materials are long-lasting and the part itself is sourced directly from the manufacturer.

This electronic clock timer is the oven control interface that displays time and manages timed bake and self-clean functions, restoring clock and timer features for normal oven operation. It replaces a faulty or unresponsive control display. What it does:

• Displays clock and countdown timer so you can set and monitor cooking times
• Controls oven timed functions (delay start, timed bake/clean) when the interface is responsive
• Replaces units that show a blank display, have unresponsive buttons, or fail to keep time
• Works as the user-facing control for programming and confirming oven settings

• One clock timer assembly

• Disconnect power to the range before starting; verify power is off at the breaker
• Expect to remove the control panel to access the module; save screws and mounting hardware
• Handle the display and ribbon/connector carefully to avoid damage; avoid bending contacts

This electronic control board manages the appliance's functions and timing, restoring proper operation to controls and cycles when the original board fails. Replaces a failed or unresponsive control module to help the appliance run correctly. What it does:

• Regulates user inputs, cycles, and timing signals for the appliance's functions
• Communicates with sensors and relays to start and stop motors, valves, and heaters
• Can resolve symptoms like unresponsive controls, incorrect cycles, or intermittent operation
• Helps stop erratic behavior caused by damaged or shorted circuit components

• One electronic control board

• Disconnect power before accessing the control board to avoid shock or damage
• Handle the board by its edges and avoid touching components or connector pins
• Verify wiring harness connectors match and are fully seated before restoring power

This main electronic control board manages refrigerator functions and user commands, restoring coordinated operation of the compressor, fans, defrost cycle and display when the original board is faulty. Replacing a failed board returns control signals and timing to the appliance. What it does:

• Regulates compressor, fan and defrost timing to maintain proper temperatures
• Processes user inputs and displays status messages or error codes
• Sends/receives signals to sensors and other modules for coordinated operation
• Common symptoms of a failing board: no display or lights, unit not cooling, erratic cycles, or persistent error codes

• One main electronic control board

• Disconnect power before starting any repair to avoid shock or damage
• Handle the board by the edges and avoid static discharge; wear an ESD strap if available
• Verify connector orientation and seat all harnesses fully during reinstallation

The Control Board is an OEM component specially designed for Frigidaire wall oven/microwave combo units. Responsible for interfacing with electronic controls, it precisely manages cooking programs.  

Prolonged exposure to elevated microwave oven temperatures causes typical deterioration reducing functionality over many years. Baking flexibility suffers without responsive command processing.

Causes involve normal electronic component fatigue from heat exposure across thousands of cooking cycles. Impacts introduce abrupt damage risks.

Symptoms indicating board issues involve:

• Unresponsive touch controls and display errors  
• Failure to initiate preprogrammed cooking functions
• Inability to accurately monitor temperature or time

Replacing with this OEM Frigidaire board restores versatile touchscreen guidance. Compatibility also fits some Kenmore, Electrolux, and Gibson combos renewing advanced bake settings for consistent, hands-free results through authorized maintenance. 

This electronic clock timer assembly replaces a failed oven clock and timer so you can set, monitor and control timed cooking functions. It restores the display and timer features that help keep your oven on schedule. What it does:

• Displays the oven clock and kitchen timer so you can track cooking time
• Enables timed bake and delay-start functions on compatible ranges/ovens
• Provides user input for setting cook times and timer alerts
• Restores control-panel timekeeping and timer countdown functionality

• One electronic clock timer assembly

• Disconnect power to the appliance before beginning any work
• Remove the control panel or trim as required; handle the new assembly and ribbon/connector with care
• Reconnect the wiring harness securely and verify the clock and timer functions after power is restored

This clock timer is the oven's electronic timer and time-of-day display, letting you set cook times, delayed starts, and monitor remaining bake/roast time for accurate cooking. Replaces a failed or unresponsive oven clock. What it does:

• Displays the time of day and countdown for timed cooking functions
• Enables delayed start and automatic shutoff for set cook cycles
• Sends timing signals to the oven control so timed operations start/stop properly
• Common symptoms: blank or flashing display, timer won't keep time, or timed bake/auto-stop doesn't work

• Disconnect power to the appliance before starting any work
• Access typically requires removing the control panel or console—use appropriate hand tools
• Handle the display and ribbon/connector gently to avoid damage

This is the electronic control board that governs the appliance's main functions and user interface, replacing a failed board to restore normal control and cycle operation. It fits the OEM form and connects to factory wiring. What it does:

• Manages timed cycles, user inputs, and electronic commands for the appliance
• Controls display and indicator responses so settings register correctly
• Helps resolve symptoms like unresponsive controls, incorrect cycle behavior, or blank/error displays
• Interfaces with sensors and relays to coordinate heating, motor, and valve operation

• Disconnect power to the appliance before attempting service to avoid shock
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available

This electronic control board is the refrigerator's main logic board that manages temperature, defrost cycles and user controls so the appliance responds correctly to settings and sensors. What it does:

• Controls compressor, fans and defrost timing based on sensor inputs
• Interprets user commands from the control panel and display
• Can cause no cooling, erratic temperatures or nonresponsive controls when faulty
• May affect defrost operation and timed cycles if the board fails

• One electronic control board (main)

• Always disconnect power to the appliance before starting work
• Handle the board by edges and avoid static discharge; ground yourself before touching electronics
• Verify connectors and sensor harnesses are fully seated and undamaged before reassembly

This electronic control board manages the oven/range user interface and core control functions so your appliance responds correctly to settings, timers and bake/broil commands. It replaces a failed or unresponsive control module. What it does:

• Interprets user inputs and runs oven cooking cycles, timers and clocks
• Sends signals to heating elements, relays and safety controls to regulate temperature
• Powers and updates the display and touchpad/controls
• Common symptom fixes: blank or error display, unresponsive keypad, oven not heating or not following selected cycles

• Disconnect all power at the breaker before starting work; this part is live-voltage sensitive
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available
• Confirm the board PN and appliance model before ordering; mounting screws and wire harnesses must match

This ignition generator and wiring harness assembly routes power and provides the spark/ignition signal needed for gas appliance burners to light. It replaces a worn or damaged ignition assembly to restore reliable lighting. What it does:

• Sends ignition voltage to the burner igniters and electrodes so burners light reliably
• Routes and secures wiring between the control module and ignition components
• Common failure symptoms: burners won't light, continuous clicking, or intermittent ignition
• Works as the electrical interface between the control and the igniters for safe startup

• One generator and wiring harness assembly

• Disconnect electrical power and turn off the gas supply before starting work
• Follow the appliance OEM diagram for correct routing and connector locations
• Inspect connectors and electrodes for damage and replace if corroded or worn