Kenmore / Sears Range Knob, Dial & Button

Control knob that replaces a damaged or missing range control knob, restoring safe, reliable selection of heat settings. Provides secure grip and positive detents for accurate temperature adjustment on electric range controls. What it does:

• Fits onto the control shaft to select heat levels for electric surface burners or range controls.
• Replaces cracked, stripped, loose, or missing knobs that won't turn or slip on the shaft.
• Restores clear tactile stops and improves ease of setting burner or oven heat.
• Helps eliminate unsafe or imprecise temperature control caused by a compromised knob.

• Disconnect power to the appliance before servicing to avoid shock or injury.
• Pull the old knob straight off the control shaft; align splines and push the new knob on until fully seated.
• If the knob does not fit or the shaft is damaged, do not force the part—inspect and replace the underlying switch or shaft assembly if needed.
• Restore power and verify correct operation of all control settings after installation.

Replacement black control knob that restores grip and control for an appliance selector, timer, or temperature shaft. Simple push-on fit and textured edge make it easier to turn controls and replace worn or missing knobs. What it does:

• Provides a firm grip for turning selector, timer, or temperature controls
• Replaces cracked, faded, or missing knobs that are hard to adjust
• Seats onto the control shaft to restore accurate, tactile feedback
• Helps prevent slipping while setting temperature or cycle selections

• Most installations are simple: pull the old knob straight off and push the replacement onto the shaft until fully seated
• If the knob is difficult to remove, use a gentle, steady pull—avoid twisting hard or using excessive force
• Disconnect power to the appliance before servicing controls to reduce risk of shock or injury

This timer knob replaces a worn or broken range timer control knob, restoring a positive grip and reliable dial operation so you can set cooking times accurately. Easy-restore part for common knob damage or wear. What it does:

• Provides a replacement control surface for the oven/range timer so the dial turns smoothly
• Re-establishes a secure connection between the user and the timer shaft for accurate time setting
• Commonly used when the knob is cracked, stripped, loose, or will not engage the timer shaft
• Helps eliminate slipping or intermittent timer operation caused by a damaged knob

• Unplug or disconnect power to the appliance before replacing the knob
• Pull the old knob straight off the timer shaft; align and press the new knob firmly onto the splined shaft
• Do not force the knob at an angle; if it does not seat easily, inspect the shaft for debris or damage
• The timer control assembly may also need replacement

Bisque in color

This knob-top valve controls gas flow to a cooktop surface burner, restoring reliable flame adjustment and safe operation. It replaces the valve assembly the control knob mounts to for one burner control. What it does:

• Regulates gas flow to a single surface burner so you can adjust flame size.
• Can stop gas flow when the valve fails, which may cause a burner to have no or weak flame.
• May be used when a control knob feels loose, slips, or no longer changes flame strength.
• Works as the mechanical interface between the control knob and the burner gas port.

• For gas appliances, turn off the gas supply and electrical power before starting work.
• Inspect fittings and gaskets for damage; replace any worn parts to ensure a proper seal.
• After installation, check for gas leaks with a proper leak detection solution and verify burner operation.

This control knob replaces a worn or broken Electronic Oven Control (EOC) knob, restoring a secure grip and reliable temperature/setting selection for your oven. It provides a direct, tactile user interface for the oven control. What it does:

• Rotates to select oven functions, temperatures, or timed features on EOC-style controls
• Replaces cracked, stripped, or missing knobs that cause loose or non-responsive control input
• Helps prevent accidental changes by fitting snugly on the control shaft
• Matches original fit and operation when the OEM knob has been damaged

• 1 control knob

• Turn power to the appliance off before replacing the knob for safety
• Pull the old knob straight off the shaft; align the new knob with the control stem and push on until seated
• If the knob feels loose after installation, verify the control shaft and inner adapter/sleeve for damage

This clock knob replaces a worn or broken timer/clock control knob so you can easily set or adjust the oven/range clock and timer. It restores a secure grip and clear control over clock/timer settings. What it does

• Fits onto the clock/timer control shaft to allow manual setting and adjustment.
• Provides a firm grip for turning the timer or setting the oven clock.
• Helps restore proper user control when the original knob is cracked, loose, or missing.
• Compatible with the OEM control interface — replaces the original-style clock/timer knob.

• Disconnect power to the appliance before servicing to prevent electrical shock.
• Typically installs by aligning the splines and pushing the knob straight onto the control shaft; avoid forcing at an angle.
• If the original knob is stuck, use a gentle, even pulling motion or a non-marring puller tool; protect surrounding surfaces.