Leaf Blower Engine

This part is a replacement gasket kit. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace worn, damaged, or defective gaskets in a variety of different small engine power equipment models.Gaskets are essential to proper engine functionality, as they prevent leaks and seal critical parts of the engine. Gaskets are subject to significant wear and tear, and can become brittle over time, causing cracks and rips. When this occurs, they should be immediately replaced. When working on or near an engine, ensure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install the gaskets in this kit, the appropriate owner's manual and equipment diagrams should be referenced. As an authentic replacement part, this gasket kit is suitable for use on several different models of brush cutters and hedge trimmers manufactured by Husqvarna and Poulan. Please note that this is a genuine part made of high-quality, durable materials and is sold individually.

This is a breather assembly that is made for use on many types of lawn and garden equipment. The breather is an important component that helps vent extra air from the crankcase of the engine. If the engine on the equipment is no longer running well, it could be caused by a malfunctioning or broken breather assembly. If this is the case, the part will need to be replaced.Several tools are needed to replace the breather assembly. These include a 7/16th-inch socket, a 3/8th-inch nut drive or socket, a Phillips head screwdriver, a 5/16th-inch nut drive or socket, a 3/8th-inch nut driver or socket, and a pair of pliers. The muffler will need to be removed to gain access to the breather assembly. It can be inspected for damage before being removed. A new part can be installed to get the engine running at its best.This breather assembly is a genuine OEM replacement part that is sourced directly from the manufacturer. It's sold as an individual component. This assembly is made for use with lawnmowers, chipper shredders, snowblowers, leaf blowers, generators, and pressure washers made by Briggs & Stratton, Cub Cadet, Toro, Craftsman, Lawn-Boy, and Simplicity.

This camshaft assembly is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. A camshaft assembly is a piece of hardware important to engines. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a tiller, a chipper, a shredder, a log splitter, and a snow blower. It is compatible with products by brands such as MTD, Cub Cadet, Yard Machines, and Troy-Bilt.The camshaft assembly part is very important when it comes to the mechanical operation of an engine. It rotates in conjunction with the crankshaft of the machine. It performs an important service that involves combining air and fuel as they enter cylinders and the gasses released from them.The replacement or repair process of the camshaft assembly should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

The flywheel is an engine component that attaches to a rotating shaft which helps to provide smooth power delivery from the motor to the machine. Some of the signs of a bad flywheel include strange noises when the motor starts, grabbing when the clutch engages, vibrations, and a burning smell.The flywheel is made from durable metal, but it could still need to be replaced in time. It could be damaged from debris, or it could simply be worn out from use over the years. If there is an issue with the flywheel, it should be replaced it before it causes more problems with their engines and the capabilities of their machines.This flywheel is for use with certain engine models from MTD, Troy-Bilt, Yard Machines, Craftsman, Columbia, and Cub Cadet. Each of the flywheels is made from quality materials and is sold individually. It is a genuine OEM replacement part sourced from the manufacturer.

Piston rings help to maintain the pressure between the piston and cylinder wall. If the compressed gas between these two parts begins to leak out, the engine will not be able to put out enough energy, and the lawn appliance will stop working. Piston rings can wear out over time due to engine overheating or faulty ignition in the engine. A telltale sign of a burnt-out piston ring is whitish-grey smoke coming from the appliance. Extreme oil inefficiency is another sign. This part is a genuine OEM part designed for Echo or Mantis handheld yard tools such as a chainsaw, hedge trimmer, leaf blower, edger, pole pruner, or tiller engine. It does not ship with other parts. Any additional parts needed to install the piston ring must be ordered independently.

This is a cylinder head used in several types of lawn and garden equipment. The cylinder head is the component that sits on top of the engine. It is responsible for closing the combustion chamber. The gap in between the head and the engine is filled with a head gasket. The cylinder head also helps ensure that the cylinder stays properly lubricated at all times. If the cylinder head has failed, it can cause dropped engine performance, low oil levels, and smoke may come from the exhaust.If the cylinder head needs to be replaced, the grass screen and shield will need to be removed. Take the bolts out of the engine cover before removing the cover. Remove the engine shroud and the bolts that hold the pump bracket to the head. The valve cover should be removed to find the cylinder head. Take the old one out and insert the new one before reassembling the equipment.This cylinder head is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The cylinder head is compatible with hedge trimmers, leaf blowers, and chipper shredders made by Shindaiwa, Mantis, and Echo.