Need Help?
Call or text
The Ice Dispenser Door Motor is an OEM part for LG refrigerators. This motor is responsible for the operation of the ice dispenser door, controlling its opening and closing mechanism to allow ice to be dispensed without letting warm air into the freeze
Unplug refrigerator. Use non marring (plastic trim stick) tool to gently pry loose the plastic assembly containing the PCB display beginning at the lower edge and proceeding around the outer edge. Disconnect all connectors and note the routing of each wire harness and connector (take pictures on cellphone as necessary). Remove two screws holding inner PCB mount bracket in place to expose actuator, flapper door and linkage. Replace actuator (three mounting screws) and ensure that actuator... Read more
The Front Panel Display Assembly is an OEM part for LG refrigerators. This assembly includes the control panel and display, allowing users to interact with and monitor the refrigerator's functions, such as temperature settings, ice and water dispen
Ordered the entire control panel. Took only 30 minutes to replace. Once I received the new part, it was obvious how easy it would be to replace. A thin putty knife and a little care not to damage the surrounding surface was all that was needed. Read more
Covers and protects the dispenser area on your refrigerator. Replace if cracked, broken, or scratched from repeated use and moisture exposure.
Very helpful video from a link on your website (https://www.youtube.com/watch?v=EBIv0bxEhkE), and saved me a major repair bill. My journey started with an effort to replace just the water dispenser button, which failed because the fifth post on the back side of the button (not the four posts which hold the button in place--it's the extra rectangular piece visible near the repairman's pinkie finger at 3:04) had broken off, and it is this piece which reaches and moves the actuator for the water... Read more
The Ice Chute Door is an OEM part for LG refrigerators. It is located in the ice dispenser area on the front of the refrigerator. It opens and closes automatically when ice is dispensed, ensuring a controlled release of ice cubes or crushed ice into th
The ice chute flap wasnt closing. 1. I turned off power 2, Pulled off facia around controls on freezer door,, you have to pull out the bottom part of the chute first , its clipped in 3. Disconnected the front panel 4. Unscrewed the next panel to allow access to the chute flap 5. Removed 1 screw holding complete flap and mechanism and replaced with new 6. Re installed all parts in reverse Problem was the chute flap had worn and was folding over on top edge when opened and then wouldnt return... Read more
Replacement water dispenser lever for refrigerator door dispensers. Needed when original lever is cracked, broken, or difficult to press for activation.