Parts for Dcs DD124: Lid And Link Assembly Parts

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

The diaphragm lid and seal kit includes the flexible rubber or silicone diaphragm and the sealing components that create a pressure-tight closure on pumps, valves, or dispensing equipment. The diaphragm flexes to control flow, while the seal prevents leaks around the lid. Replace this kit if you notice leaking around the lid, reduced pressure or flow, or if the diaphragm has become stiff, cracked, or torn.

The diaphragm lid and seal kit includes the flexible rubber or silicone diaphragm and the sealing components that create a pressure-tight closure on pumps, valves, or dispensing equipment. The diaphragm flexes to control flow, while the seal prevents leaks around the lid. Replace this kit if you notice leaking around the lid, reduced pressure or flow, or if the diaphragm has become stiff, cracked, or torn.

Replacement lid actuator kit that restores lid engagement and movement for affected Fisher & Paykel washers. Includes two actuators so you can replace worn or broken units and help return proper lid latch and cycle operation. What it does:

• Replaces the small actuator that engages the lid latch/lock assembly to allow proper lid movement and secure closing.
• Helps address symptoms such as lids that fail to latch, intermittent lid locking, or cycles that won't start due to improper lid engagement.
• Restores mechanical action; works as a direct replacement where this actuator design is specified.

• Disconnect power to the appliance before starting any repair to avoid shock or injury.
• Use basic hand tools; handle plastic tabs and mounting points carefully to avoid breakage.
• Follow for access, alignment, and proper fastening; test lid operation before final reassembly.

Lower fill hose kit for dishwasher water supply connection. Replace if hose is cracked, leaking, or damaged. Installs at the base water inlet.

Door trim seal kit for dishwashers. Replace if you notice water leaking around the door edges or visible wear on the seal. Verify fit with your model number.

Replace your dishwasher drain hose kit when you notice leaks, cracks, or water pooling. Ensures proper drainage and prevents water damage. Verify fit with your model number before ordering.

Replace your dishwasher's cuff socket O-ring seal to prevent leaks and maintain proper water flow. Essential when you notice water pooling or dripping. Verify fit with your model number before ordering.

Fix leaking or poor cleaning in your dishwasher with this valve flap kit. Includes 2 flaps to restore proper water flow. Moderate DIY repair in 30-45 minutes.

The diaphragm lid and seal kit includes the flexible rubber or silicone diaphragm and the sealing components that create a pressure-tight closure on pumps, valves, or dispensing equipment. The diaphragm flexes to control flow, while the seal prevents leaks around the lid. Replace this kit if you notice leaking around the lid, reduced pressure or flow, or if the diaphragm has become stiff, cracked, or torn.

Lower chassis wire harness for dishwashers. Connects electrical components in the base assembly. Replace if wires are damaged, corroded, or connectors are broken.

Secures hoses in your dishwasher to prevent leaks and water damage. Replace if loose, cracked, or causing connection leaks. Verify fit with your model.

Extends dishwasher drain hose by 11' 10". Replace missing or damaged extension kit to complete drain system installation or repair.

Wire clip secures the drain hose connection in your dishwasher. Replace if the original clip is broken, missing, or no longer holds the hose firmly in place.

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.

Secures the linkage rod for stable mounting and proper alignment. Replace if cracked, broken, or missing to restore quiet dishwasher operation.

Connects two sections of dishwasher drain tubing to restore a continuous path. Replace if cracked, broken, or leaking at the connection point.

Connects two sections of dishwasher drain tubing to restore a continuous path. Replace if cracked, broken, or leaking at the connection point.

This clip link support is a small mounting clip used to secure linkages and cables inside the appliance, keeping moving parts aligned and preventing binding. It helps restore proper motion and reduces noise from loose linkages. What it does:

• Secures a linkage or cable to the cabinet or component bracket to maintain correct alignment
• Prevents linkages from shifting, which can cause sticking, binding, or improper operation
• Helps reduce rattling or knocking noises caused by loose or disconnected links
• Restores intended movement of door/valve/actuator linkages when the original clip is worn or broken

• One clip link support

• High-level replacement; remove power before accessing internal components
• Inspect surrounding linkage and fasteners for wear while installing the clip
• Use care not to damage nearby wires, hoses, or components when snapping the clip in place

Secures and positions your dishwasher drain hose to prevent kinks and improper routing. Replace if clip is cracked, broken, or missing for stable hose support.

Joins two dishwasher drain hoses or connects drain outlet to household drain. Replace if leaking, cracked, or causing drainage issues. Verify fit with your model number.

This replacement joiner drain hose connects dishwasher drain lines to the home drain or disposer, restoring proper wastewater flow and helping prevent leaks caused by brittle or damaged tubing. Simple, direct replacement for the original joiner hose. What it does:

• Links the appliance drain outlet to a house drain or garbage disposer to route wastewater away.
• Replaces cracked, split or collapsed joiner tubing that can cause leaks or poor drainage.
• Helps stop symptoms such as water pooling beneath the appliance, slow draining, or visible leaking at the hose connection.
• Designed to match OEM routing and connection points for a like-for-like drain path.

• Disconnect power and water supply before servicing.
• Remove existing clamps and fittings, then slide hose into place and secure with appropriate clamps; do not reuse corroded clamps.
• Ensure hose routing avoids kinks, sharp bends, and contact with hot engine parts; maintain proper high-loop or air-gap per local code.
• Run a short test cycle and check for leaks at both connections before returning the appliance to service.

Small mounting tab that secures trim, panels, or shelving edges in your dishwasher. Replace if broken, missing, or cracked to restore stable attachment.

This integrated install kit enables a built-in installation by providing the hardware needed to mount and align a custom cabinet or décor panel to the appliance. It helps achieve a secure, flush fit for integrated installations. What it does:

• Provides the mounting hardware and brackets used when fitting a custom cabinet or panel to the appliance
• Helps align and secure the door or panel so it sits flush with surrounding cabinetry
• Replaces missing or damaged installation hardware that can cause loose panels or poor fit
• Commonly used during new installs, cabinet refits, or when converting to an integrated appearance

• Always disconnect power to the appliance before beginning installation
• Follow the appliance's installation instructions for panel adjustments, weight limits, and mounting sequence
• Use appropriate tools and fasteners; do not overtighten to avoid damaging panel or appliance

Dissolves limescale, mineral deposits, and odor-causing residues from dishwasher tub and spray system. Use monthly to maintain peak cleaning performance.