Parts for Ge ZISP480DXDSS: Machine Compartment Parts

Replace your refrigerator water filter every 6 months to maintain clean water and ice. Removes contaminants for fresh taste. Easy DIY install in minutes.

Fix a non-responsive display, blinking lights, or cooling failure. This power supply board restores proper voltage to electronic controls and displays.

Mounting bracket that secures the water inlet valve to the refrigerator frame. Replace if bracket is cracked, bent, or missing causing valve instability.

This replacement main control board restores the refrigerator's electronic control system so the unit can respond to user inputs and regulate temperature cycles. Use when control failures affect operation or display functions. What it does:

• Receives and processes commands from the user interface to run compressor, fans, and defrost cycles
• Manages temperature control by signaling components based on sensor inputs
• Corrects symptoms such as no display, unresponsive controls, continuous running, or no cooling when the board has failed
• Interfaces with other modules to coordinate defrost and compressor timing

• Disconnect power before beginning work to avoid shock or damage
• Handle the board by its edges and avoid static discharge; wear an antistatic wrist strap if available
• Basic hand tools typically required; note connectors must be seated fully and harnesses routed as original

Secures and elevates the main control board to prevent electrical shorts. Replace if broken, cracked, or missing to restore proper board clearance.

Refrigerator not cooling properly? A faulty suction tube cap assembly causes refrigerant leaks and inadequate cooling. Requires EPA-certified technician.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the syst

Drip pan and vaporizer assembly that collects defrost water beneath your refrigerator. Replace if cracked, rusted, or missing to prevent leaks.

Fix a refrigerator that's not cooling or has an overheated compressor. This condenser fan motor circulates air over the compressor and coils. DIY-friendly.

Rear condenser fan mounting bracket for refrigerators and freezers. Replaces broken, cracked, or missing brackets that secure the fan assembly.

Rubber grommet that mounts the evaporator or condenser fan motor to its bracket. Replace when worn, cracked, or missing to reduce vibration and noise.

Refrigerator not cooling or running constantly? This compressor powers your cooling system. Advanced repair, allow 2-4 hours for replacement.

Secures the condenser fan motor in position. Replace this bracket if cracked, bent, or causing excessive vibration to restore stable mounting.

Refrigerator running hot or making loud noises? A worn condenser fan blade prevents proper airflow across coils. DIY repair in 30 minutes or less.

Guides airflow across the condenser and secures the fan motor in place. Replace if cracked, broken, or missing to restore proper cooling airflow.

Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.

Interior light not turning on or staying on? This master light switch kit restores reliable lighting control in your freezer. Direct-fit assembly.

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises fro

Refrigerator not cooling or running constantly? A damaged condenser coil prevents proper heat release. This assembly restores cooling efficiency.

Size: 8-32 t. Includes 12 screws.

Condenser air baffle for refrigerators. Directs airflow over the condenser coils. Replace if cracked, broken, or missing to maintain proper air circulation.

Left-hand air baffle for refrigerators. Guides airflow between compartments. Replace if cracked, broken, or missing to restore proper air circulation.

Mounting bracket that secures the water valve in your refrigerator. Replace if the bracket is cracked, bent, broken, or missing to properly support the valve.

No water from dispenser or ice maker? This water inlet valve assembly controls water flow into your refrigerator. DIY-friendly repair in about 2 hours.

Size: 8-16 x 2 inch ss.

Refrigerator not cooling? Compressor won't start? This inverter board controls compressor speed and cooling. Moderate DIY repair with electrical testing.

Refrigerator drier accumulator component that installs in the sealed refrigeration system. Replace if damaged, leaking, or during compressor repairs.

Replacement edge trim that covers and protects exposed edges on refrigerator doors or cabinets. Needed when original trim is cracked, broken, or missing.