Need Help?
Call or text
Replacement burner valve for gas ranges. Controls gas flow to individual burners. Replace if valve is stuck, won't turn, or shaft is stripped or worn.
Ordered correct replacement parts (your online form helped to identify correct valves 2 had black dot on inside stem for back small burner 1 had red dot for larger front burner). locked stove, turned off gas, unplugged cord. removed knobs, 5 screws and front plate also removed L shaped plate below knobs for better access to comp. fittings. pulled off ignitior controls loosened compression fittings (hard to get wrench on nut but doable), removed screw holding valve to manifold. reversed order... Read more
Controls gas flow to surface burners on gas ranges and cooktops. Replace if valve is stuck, frozen, won't turn, or broken from wear over time.
Sealed burner head for gas ranges. Sits on top of the cooktop to direct gas flow and create an even flame. Replace if cracked, corroded, or damaged.
I replaced the burner head. I turned off power to the stove, although I did not turn off the gas. I gave the old burner head a slight twist counter-clockwise until it lifted off the stove. I used the pliers to pull the wires from the old burner, then placed them onto the contacts on the new burner. Set it in place, and gave it a clockwise twist until it was snug. This stove originally came with gaskets beneath the burners, but the info for the replacement part stated that a gasket was not... Read more
Replace a cracked, broken, or worn burner head on your gas cooktop. Provides mounting structure for the burner cap and igniter. Sold individually.
I replaced the old burner with the new burner assembly which included the ignighter. The screw that held the old ignighter was frozen into the old burner such that just the ignighter could not be replaced. Be care full removing the screws to the burner as they also may be frozen and tend to snap off instead of unscrewing. You will need to drill an tap new holes. Read more
Burner head for gas ranges and cooktops. Distributes gas evenly for stable flame. Replace if cracked, warped, or damaged to restore proper burner operation.
Replace the burner part that was broken. Read more
Replace your cracked, corroded, or missing gas cooktop burner assembly. Includes igniter pre-installed. Installs on cooktop with two screws (sold separately).
Replace your cooktop's burner cap if cracked, rusted, or missing. Sits atop the burner head to evenly distribute flame for consistent heating performance.
After many years of excellent service the burner I use most often on the top of my JenAir range rusted through. After trying to remove the burner, which was firmly rusted into place, I decided to replace the cooktop pan, both burners and igniters. It was an easy repair to swap out the new parts for the old, and the only tool necessary was a #2 phillips screw driver. The only difficulty was that although the cooktop pan appears symmetrical, the screw hole pattern on each side is different. I did... Read more
LP orifice kit for gas range bake and broil burners. Includes conversion orifices to switch from natural gas to liquid propane. Replace when missing.
This fitting is a 3/8 nut driver and an adjustable wrench. Read more
Replace your cracked or damaged gas range ultra rapid burner head assembly. Installs on the cooktop. Includes ignitor. Ideal for worn or broken burners.
Replaced burners, saved $350, easy and it worked! Read more
Black burner cap sits on top of the burner head to distribute flame evenly. Replace if cracked, chipped, missing, or discolored from heat and spills.
These guys had exactly the parts I needed. We're quite expensive, but they arrived quickly and were a perfect fit! Read more
Black burner cap sits atop gas burner to direct flames evenly. Replace if cracked, chipped, missing, or stolen. Fits left and right front burners.
Ordered caps and self installed. Read more
Replace your cracked, missing, or worn gas range burner cap. Sits atop the burner head to distribute flame evenly and protect from spills and debris.
Ordered new ones. Delivery was very quick. Ordered on Friday, received item on Sunday by 10 with rush order service. Read more
Replacement sealed burner assembly for gas ranges and cooktops. Installs on stovetop surface. Needed when burner cap is cracked, broken, or rusted out.
These are very easy to replace ,just gave the old one a quarter turn lifted it out took the two wires off (noted where each one will go on the new burner ) pop the wires onto the new burner put it on and good to go. Read more
Converts your range oven from natural gas to LP propane fuel. Includes all orifices and components needed for bake and broil burners. Essential when switching fuel types or moving appliance to propane supply.
I purchased a burner and a oven orifice replacement kit from Appliance Parts Pros. I downloaded an installation manual from Whirlpool and followed the instructions. It was pretty easy. The front burner orifices could be replaced by just taking off the burner cover. The back ones required removing the burner diffuser. You will need to reattach the back burner bottom assembies after you remove the diffuser before you unscrew the orifice or it might bend the burner piping causing it to not line up... Read more
Replacement burner head for gas cooktop semi-rapid burners. Sits atop the burner to shape and direct the flame. Replace if discolored, corroded, or worn.
I immediately turned to Appliance Parts Pros and got the best price for 4 new burners and finding parts for my stove top model is a challenge due to its age. My stove top looks new again! Plus, they were delivered ahead of schedule! Thank you!!! Read more
Set of five LP orifices for converting gas ranges to liquid propane. Replaces worn or missing orifices during fuel conversion. Essential hardware kit.
Changing out the stovetop orifices from natural gas to propane- First thing, turn off the gas. On this model stove, there are five burners-two burners in the front, two in the back and one in the middle. The front two burners are different than the other three, they are the largest burners. You can use a 11/32 socket with an extension to go down the middle hole of the burner and screw-out the natural gas orifices. Taking the orifices out was easy. Putting the new orifices in is a different... Read more