Maytag Cooktop Touch Pad

Replace the control panel to restore a clean, secure interface for selecting settings and protecting the controls. Ideal when the original panel is cracked, dented, loose, or its graphics are worn and hard to read.

• Provides the fascia that houses and aligns the keypad/display or control knobs
• Shields internal components from heat, spills, and impacts
• Restores proper button alignment and the appearance of the front console
• Common symptoms: cracked or broken panel, stripped or missing mounting tabs, peeling/illegible labels, loose or rattling console

• Disconnect power at the breaker before servicing
• Remove door/knobs/trim as needed; support the console while removing mounting screws
• Transfer any attached controls and hardware from the old panel to the new panel
• Handle sharp edges and do not overtighten fasteners to avoid damage

This Whirlpool touchpad and control panel is intended for use with wall ovens. The control panel and touchpad provide users with the ability to control the oven's functions. The touchpad can wear out through normal, everyday use over time. The panel itself, although made from stainless steel and very durable, can also begin to wear if not properly cleaned and maintained.Signs that the touchpad might need to be replaced include difficulty pressing the buttons and operating the oven. If the overlay on the display is difficult to read, or if the metal is corroding, it should also be replaced. Before replacing this part, first turn off the breaker to the oven. Then, remove the two screws at the top of the display and pull outward. Remove the control board from the inside and install it in the new panel, then install the panel.This is a genuine OEM part, sold individually. It fits Maytag wall ovens only.

This control panel assembly replaces the appliance's user interface. Installing a new panel restores reliable button response and a clean, factory look so you can select settings, time, and options with confidence.

• Provides the button/touchpad area and display window you use to operate the appliance
• Sends key presses through its ribbon connector to the main control
• Common symptoms: unresponsive or intermittent keys, stuck/beeping keypad, or a cracked/worn panel face
• Restores proper console alignment and secure mounting

• Disconnect power at the breaker before servicing
• Remove trim/console screws; support the panel and transfer any clips, screws, or attached components from the old assembly as required by your model
• Handle flat ribbon cables by their connectors; avoid creasing and ensure they are fully seated/locked
• Test all keys and functions before final reassembly

This is a Whirlpool range control panel. It houses the display, user interface buttons, and has space for temperature control knobs. With extended use, the buttons on a control panel may wear out or stop responding to user input.Before installing this part, be sure to cut power to the appliance and allow it to cool completely. The stove may need to be pulled away from the wall to access the screws holding the old control panel in place. Remove the screws from each side of the old control panel to disconnect it, then carefully remove any boards or other components installed within the panel. Once it has been completely removed, the new control panel can be installed in its place.This is a genuine OEM part compatible with ranges manufactured by Whirlpool brands, including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product is just the panel and contains no additional parts or hardware.

This is a Whirlpool range control panel assembly. It houses the display, user interface buttons, and has space for temperature control knobs. With extended use, the buttons on a control panel may wear out or stop responding to user input.Before installing this part, be sure to cut power to the appliance and allow it to cool completely. The stove may need to be pulled away from the wall to access the screws holding the old control panel in place. Remove the screws from each side of the old control panel to disconnect it, then carefully remove any boards or other components installed within the panel. Once it has been completely removed, the new control panel can be installed in its place.This is a genuine OEM part compatible with ranges manufactured by Jenn-Air, but may also work with other Whirlpool brands, including Maytag, KitchenAid, Amana, Magic Chef, Admiral, Norge, Roper, and others. This product is just the panel and contains no additional parts or hardware.

This control panel assembly is the front console that houses the oven/range user interface and display, restoring visible controls and user input so you can select cycles, set temperatures, and monitor settings. What it does

• Contains the control interface (buttons/touchpad and display) used to select functions, temperatures and timers.
• Re-establishes visible feedback and input when buttons are unresponsive or the display is blank or flickering.
• Helps restore control of oven/range functions when the console is cracked, damaged, or failing.
• Works as the direct replacement for the damaged or nonworking control console to return normal user operation.

• Disconnect power at the breaker or unplug the appliance before starting—electrical shock hazard.
• Handle the display and trim carefully to avoid damage; some wiring harnesses or connectors must be disconnected and reattached.
• Keep track of screws and retainers; a basic screwdriver set is usually required.

Replace a damaged or worn console with this control panel assembly. It restores a clean, secure mounting surface for the user controls and helps protect internal components so your appliance looks right and operates as intended.

• Houses and supports the user interface components (buttons/knobs/keypad and display bezel)
• Keeps controls aligned and securely mounted for proper operation
• Shields internal wiring and control electronics from incidental contact
• Helps resolve issues like loose controls, cracked or warped console fascia, and heavy cosmetic wear

• Disconnect power at the breaker or unplug the appliance before starting; shut off gas supply if applicable
• Remove any knobs/trim and the screws securing the old panel; support the panel while detaching
• Transfer required hardware, bezels, and brackets from the original panel to the new one
• Reassemble carefully and verify controls move freely before restoring power

This control panel console assembly houses the user interface and display for the range, restoring reliable button/touch input and clear visual feedback so you can set cooktop and oven functions with confidence. What it does

• Provides the keypad/touch controls and display used to set temperatures, timers, and cooking modes.
• Replaces a cracked, faded, or damaged console that impairs operation or visibility.
• Use when buttons or touch controls are unresponsive, the display is blank or dim, or inputs register intermittently.
• Helps correct erratic or inconsistent control behavior caused by a damaged panel assembly.

• Disconnect power (unplug or turn off the breaker) before beginning any service.
• Follow model-specific disassembly steps to remove the backguard/console; handle glass and overlays carefully to avoid damage.
• Ensure all wire harness connectors are fully seated and routed without pinching; do not force connectors.

This stainless steel control panel assembly is the user interface for your appliance. Replacing a worn panel restores a clean look and reliable button operation when the original is cracked, dented, or the keys stop responding.

• Provides the buttons and labels used to select settings and cycles
• Sends keypad selections to the appliance's control
• Secures the user-interface components at the front of the unit
• Typical symptoms: unresponsive or intermittent buttons, stuck keys, cracked/dented console, worn or illegible labels, loose panel

• Disconnect power at the breaker before servicing
• Support the panel as you remove screws to avoid straining wiring
• Carefully release and reconnect any ribbon/plug connectors; keep contacts clean and unbent
• Reuse mounting hardware and transfer any trim or brackets from the original panel; test all buttons after reassembly

This membrane switch touch pad replaces the flat electronic control surface on your appliance's control panel, restoring button responsiveness and user input. It provides the tactile contact surface the control board uses to register commands. What it does:

• Registers user button presses so the control board can start cycles and change settings
• Replaces worn, faded, or unresponsive touch buttons that fail to respond consistently
• Restores functions such as keypad entry, start/cancel, and other front-panel commands
• Helps address intermittent or nonworking controls caused by a damaged or worn pad

• Disconnect power to the appliance before starting any work to avoid shock or damage
• Handle the flexible ribbon connector and contacts carefully to avoid creasing or contamination
• Installation typically requires removing the control panel or console; keep screws and fasteners organized

This control panel assembly provides the front-facing electronic interface and buttons that let you select cycles, options, and start or stop the appliance. It restores responsive controls and readable push-button or touch operation. What it does:

• Houses the appliance's main user controls and display so you can select cycles and settings
• Sends user commands to the main control board for operation
• Replaces worn, cracked, or non-responsive buttons or a faded display
• Helps resolve issues where buttons don't register or the panel shows no response

• One control panel assembly as shown

• Disconnect power before attempting service to avoid electrical shock
• Replacement generally requires removing the front console or trim; keep screws and connectors organized
• Handle the panel carefully to avoid damaging the display and ribbon/connectors

Black. No longer includes control board. For control board use 74008952

This replacement backsplash restores the rear panel that protects the wall behind a freestanding range and gives the appliance a finished appearance. It helps contain splatter and shields wiring and components from spills and debris. What it does:

• Covers the rear opening of the range to protect adjacent walls from grease, steam and food splatter
• Shields wiring and control components located at the back of the appliance
• Restores a clean, finished look when the original panel is dented, rusted or missing
• Helps prevent debris from entering the cabinet and control cavity

• Disconnect power to the range before beginning any work
• Use proper lifting support; a second person may be needed to hold the panel during installation
• Retain and reuse factory screws and fasteners unless replacement hardware is specified
• Handle edges carefully to avoid cuts; align mounting tabs and secure firmly but avoid overtightening