Maytag Dishwasher Hinge Parts

• Noisy
• Door won't close
• Door latch failure

I finally decided to repair my dishwasher because the door would free fall to the floor possibly breaking the hinges. Also the top shelf was rolling out on its own every time the door was opened. I first pulled the dishwasher out of the enclosure and found that the drain hose was directly under the pump area throwing the unit completely out of level. Also the inadequate plastic and rope counterbalance on the left side was completely broken where the rope was attached to the plastic piece to the... Read more

Following the very clear and concise Video from AppliancePartsPros.com, I was able to insert the friction pads that had fallen off from the dishwasher door. It now works. The next project may be to replace the rollers of the Dish Rack which are now a little bit worn out. Read more

I first wanted to get the dishwasher running, before ordering the spring links. So I disassembled the pump / motor assembly to determine the reason the motor would not start. My wife cleaned all of the parts in the pump assembly. I took the motor apart and discovered that the lower bearing ( a sleeve type bearing) was dry and dirty, and was the culprit for the motor seizing. I cleaned up the bearing and lubricated it with SAE 20W. I also packed felt inside the cavity adjacent to the bearing.... Read more

Normally when you let go of the dishwasher door partly open it would stay in that position. But lately when you let go of the door it would fall to the fully open position. Turns out this little cable was broken one one side. Just puss the dishwasher slightly out of the cabinet and you can replace the cable in minutes. It is just held in place with a spring. Read more

We scoured the web and there are few references to this so I want to add it in case it helps. Replacing hinges solved the popping opening issue. We could not solve our dishwasher door issue after a number of other tries: Latch, Catch, Ropes that attach to the springs that pull the door closed. I tend to believe the solve could be different b/c all these things work together. But for us, we were skeptical that the hinge swap would work and we were very pleasantly surprised. Read more

Watched your very helpful and informative "how to" video and replaced both right and left hinges. Getting the front panel to line up on the clips was the most difficult part. Read more

Purchased door springs from Appliance Parts pros.com, installed them and door on our Dishwasher was back to normal, Had to pull out dishwasher from under cupboard to get to springs, as they were on the sides of the dishwasher. Read more

We scoured the web and there are few references to this so I want to add it in case it helps. Replacing hinges solved the popping opening issue. We could not solve our dishwasher door issue after a number of other tries: Latch, Catch, Ropes that attach to the springs that pull the door closed. I tend to believe the solve could be different b/c all these things work together. But for us, we were skeptical that the hinge swap would work and we were very pleasantly surprised. Read more