Maytag Dishwasher Control Board

The Electronic Control Board is an OEM part for Whirlpool dishwashers. This part manages and regulates the dishwasher's functions, including cycle selection, water temperature, and the timing of different phases in the washing process. 

Common causes of a bad control board include electrical surges, moisture exposure, or general wear and tear over time.

Symptoms of a bad electronic control board include:

• The dishwasher not starting or completing cycles
• Error codes displayed on the control panel
• Unresponsive or erratic buttons and controls
• The dishwasher stopping mid-cycle or failing to perform as expected

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool dishwashers. It manages and regulates the dishwasher's various functions, including the wash cycles, water temperature, and timing.

You should replace the electronic control board if it becomes faulty. Causes of a bad control board can include electrical surges, moisture damage, or wear and tear over time. These factors can lead to malfunctioning or failure of the control board, impacting the dishwasher's performance.

Symptoms of a bad electronic control board include:

• Dishwasher not starting or stopping mid-cycle
• Inconsistent wash cycles
• Error codes displayed on the control panel
• Failure to properly heat water or drain

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Cntrl-Elec is an OEM component specifically designed for Whirlpool dishwashers. This control board governs and directs the electronic operations of the dishwasher. It allows the dishwasher to run through wash cycles and heat water to the appropriate temperatures. 

Symptoms of a bad control board include:

• The dishwasher not turning on at all
• The dishwasher not completing full cycles
• Issues with heating or not heating water properly
• Error codes appear continuously 

The control board is susceptible to faults over several years of regular usage. Water exposure or power surges can potentially damage electronic components. Replace yours with this genuine Whirlpool OEM part to restore full functionality to your dishwasher.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This electronic control board is the appliance's central controller. It interprets user inputs and sensor feedback to run cycles and coordinate components. Replacing a failed board can restore proper operation and responsive controls. What it does:

• Manages the timing and sequence of operations based on selected settings
• Interprets signals from the user interface and internal sensors
• Directs power to components via onboard electronics
• Monitors system status and may store/output diagnostic error codes
• Common failure symptoms: won't start, unresponsive or blank display, stuck/erratic cycles, or recurring error codes after a power reset

• Disconnect power to the appliance before servicing; verify no voltage is present
• Use ESD protection and handle the PCB by edges only
• Photograph/label connectors and move them one at a time to the new board to prevent miswiring
• Inspect wiring, fuses, and related components for shorts or damage and correct any root cause before powering the new board; follow the unit's tech sheet for any required post-install setup

This electronic control board is the dishwasher's brain, managing cycles and powering the pump, valve, heater, and other loads. Replacing a failed board restores normal start, wash, drain, and dry functions.

• Coordinates and times wash cycles based on user selections and sensor inputs
• Sends power to the circulation pump, drain pump, water inlet valve, and heater
• Interfaces with the user interface and monitors door/latch status
• Failure may cause: no start, cycle won't advance or ends early, no fill/drain/heat, or error codes

• Disconnect power at the breaker before servicing; verify power is off
• Access location varies by model; commonly behind the lower toe panel or inside the console
• Handle the board by the edges and observe ESD (anti-static) precautions
• Move wire connectors one at a time from the old board to the new, secure the board, and reassemble; run any required diagnostics/reset per your model's tech sheet

This electronic control board kit is the appliance's central controller, coordinating inputs and powering key components. Replacing a failed board restores proper operation, responsive controls, and reliable cycle management. What it does:

• Manages timing and power to motors, valves, heaters, fans, and other loads
• Interprets sensor and user-interface signals to start, run, and end cycles correctly
• Common failure signs: dead or unresponsive controls, cycles that won't start/finish, repeated error codes, or intermittent operation
• Helps address issues caused by power surges or board damage

• 1 electronic control board (module)

• Disconnect electrical power to the appliance; turn off gas/water if applicable
• Use ESD protection and handle the board by its edges
• Photograph wiring; transfer connectors one at a time and match any jumpers/DIP-switch settings from the original board
• Restore power and perform any model-specific tests or programming per OEM instructions

The OEM Electronic Control Board is an OEM replacement part for Whirlpool dishwashers. It is a circuit board that controls all of the functions of the dishwasher, including the wash cycles, water temperature, and detergent dispensing.

Causes of failure involve damage from liquid intrusion shortening circuits or component deterioration over extended use reducing precision.

Symptoms include:

• Dishwasher fails to start selected cycle
• Lights, displays or programming malfunctions
• No response from control buttons
• Dishwasher appears dead or powerless

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Restore reliable cycle control with this electronic control board. It serves as the dishwasher's brain, coordinating wash, drain, and dry functions so the machine starts, runs, and completes cycles as expected.

• Orchestrates cycle timing and interprets sensor inputs
• Distributes power to components such as the wash motor, drain pump, and water inlet valve
• Communicates with the user interface to execute cycle selections
• Typical failure symptoms include: won't start or power up, cycles won't advance, stops mid-cycle, won't fill or drain, or control-related error codes

• Disconnect power at the breaker and turn off water supply before servicing
• Use ESD protection and handle the board by its edges only
• Access the control area, move wire connectors one at a time to the new board, and secure it in the original mounting
• Restore power and, if available, run the unit's diagnostic/service cycle to verify operation

This electronic control board is the appliance's central controller, interpreting inputs and switching power to components to run each cycle. Replacing a failed board restores responsive controls and reliable operation when the unit is unresponsive, erratic, or showing error codes.

• Coordinates timing and sequence of operations for the appliance
• Interfaces with user controls and display
• Sends power to motors, valves, fans, or heating elements as directed
• Typical failure signs: no response to controls, won't start/run, erratic or stuck cycles, recurring fault codes

• Disconnect power at the breaker or unplug before servicing
• Use ESD precautions; handle the board by the edges only
• Photograph connections and transfer wiring/connectors one at a time
• Ensure all harnesses are fully seated; follow the service sheet for any model-specific setup or configuration

This control board kit replaces the appliance's main electronic control to restore normal cycle selection and responsive user controls. It provides the core logic and interface needed for timing, sensor response, and displaying status. What it does:

• Manages cycle timing, sensor inputs, and actuator commands to run selected cycles
• Processes user inputs from the console and updates the display/status indicators
• Helps resolve symptoms like unresponsive controls, missing display feedback, or intermittent cycle failures
• Works as the OEM-specified replacement logic module for affected control functions

• One control board kit as shown

• Disconnect power (and water/gas if applicable) before servicing to avoid shock or injury
• Handle boards by the edges and ground yourself to prevent ESD damage
• Follow the appliance's service manual for connector locations and mounting; retain all fasteners

The Cntrl-Elec is an OEM part for Whirlpool dishwashers. As the control and electronic component, it governs all of the major functions and operations of the dishwasher. The control board contains integrated circuits, microprocessors, and electronic components that facilitate cycles, temperature regulation, safety features, and user input.

Over time, the electronic components inside the controller can degrade or become damaged. Environmental factors like surges, fluctuations in power, and other electrical issues may also potentially cause failure. 

Symptoms of a bad controller can include:

• Not operating or cycling at all
• Inability to start or stop cycles
• Fault codes displayed
• Issues with heating or drying
• Buttons or control panel not responding

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Board is an OEM part for Whirlpool dishwashers. It serves as the central control unit, regulating various functions such as cycle selection, water temperature, and drying operations through its electronic components.

Causes of a bad control board can include power surges, electrical shorts, water damage, or simply wear and tear over time.

Symptoms of a bad Control Board include:

• The dishwasher not starting or responding to inputs
• Error codes or indicator lights illuminating
• Cycles not running or completing properly 
• Issues with water intake, draining, or heating
• Strange noises or abnormal behavior during operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.