Mcculloch Parts

This is a high-quality retainer that is typically used in string trimmers. It is made of durable metal and fits in the area between the outer spool assembly and the spring on the trimmer. The purpose of the retainer is to ensure the spool stays in the correct location while the string trimmer is being used. This component can become damaged, break, or be lost and will need to be replaced in order to be sure the spool is supported and secure.If there is an issue with the string trimmer retainer, it can cause excessive noise during use. It also may prevent the trimmer from starting if other components are affected. A wrench and work gloves may be required to replace the part. Gain access to the retainer and remove it using the wrench. The new replacement part can be installed in the same place. Reassemble other parts, and the trimmer will be ready to use.This retainer is designed to fit string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, MTD, and Yard-Man. It is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a genuine replacement for MTD engines in select models of lawn and garden equipment. The carburetor gasket is situated between the carburetor body and the engine to provide a secure seal to keep air from leaking out. The engine needs proper compression to run and that is ensured by gaskets and seals like this one. Over time, however, these are exposed to constant heat and pressure and can shrink or become damaged as a result. Replacing gaskets is typically considered a part of routine maintenance on most equipment. Gaskets should be replaced immediately when they fail, and inspected any time work is done on the carburetor. This OEM carburetor gasket is designed to work with more than 150 different models of blowers, trimmers, cultivators, and edgers. It can be used in products from brands like MTD, RYOBI, Bolens, Troy-Bilt, Cub Cadet, Husky, Yard Man, and Yard Machines. The gasket is made of durable metal material and is sold as a single unit. Hardware is not included with this item. Be sure to cool the engine before performing repairs and drain the fuel system to prevent leaks and spills when working on the carburetor and its components.

This starter rope is made for use with many types of lawn and garden equipment, such as string trimmers and leaf blowers. The rope wraps around the starter pulley and can be pulled manually to cause the engine to start running. With wear and tear through use, the starter rope can start to fray. If the rope isn't replaced when fraying, it can also break and render the equipment no longer usable until a replacement part has been installed.The most common symptom of a broken or worn starter rope is an issue when trying to start the engine. The rope will be pulled, and the rope will keep coming out of the machine instead of turning on the engine. Before replacing the starter rope, remove the spark plug wire to prevent the engine from starting. The starter rope can be removed and a new component installed in its place.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as a single starter pull rope. This rope is made for use with string trimmers, leaf blowers, snowblowers, lawnmowers, and tillers created by MTD, Craftsman, Cub Cadet, Murray, Yard Machines, Bolens, Troy-Bilt, Ryobi, and Yard-Man.

This replacement part is a locking rod. This is a genuine replacement part made by MTD. This specific part is found in many different machines and is important for ensuring the user is kept safe if the compressed air supply fails.A new locking rod might be needed if the current one is damaged or missing. This can include being dented, cracked, or bent. If the user is noticing issues inside the machine, such as issues with the air compression, it can be due to a malfunctioning locking rod. Be sure the engine is powered down during this repair. Refer to the appropriate user manual before beginning to repair this part. This locking rod is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is a genuine OEM replacement part.

This blade guard is a genuine MTD replacement part for a lawn trimmer, which is designed to cut grass, shrubs, bushes, and weeds. The blade guard is a safety feature on lawn trimmers that protects appliance users from physical damage as a result of coming into contact with the blades.A lawn trimmer blade guard might have to be replaced if there is damage to it that reveals the blades, thereby endangering the appliance user through exposure to the sharp blades. If the blade guard is damaged, it must be removed and replaced immediately, as the lawn trimmer blades should be protected with an adequate housing device. To remove and replace a blade guard for a lawn trimmer, one will need a flathead screwdriver. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This blade guard is compatible with the following brands: Ryobi, MTD, Yard Man, and Troy-Bilt. This part sold individually.

This part is a replacement handle bracket assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. It is intended to replace a defective or broken handle bracket assembly in line trimmers.This handle bracket assembly ensures that the line trimmer handlebars are securely and properly attached to the drive shaft. This part will require replacement if corroded, faulty, or broken in any way. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to use this handle bracket assembly, the appropriate owner's manual and equipment diagrams should be referred to. This handle bracket assembly is a genuine OEM part made of durable metal and is sold individually. It is suitable for use with line trimmer models that have been manufactured by MTD, Craftsman, Troy-Bilt, and other brands.

This is a wound spool assembly that can be used on several models of lawn and garden equipment. The spool assembly is the part that holds the trimming line. It also operates by letting the line feed out when a trimmer or pruner is being used. The wound spool assembly is a component of the cutting head assembly but can be replaced as a single part. This wound spool assembly part experiences a great amount of wear and tear. It's not a bad idea to have an extra available for any needed replacement. If the spool assembly is broken or damaged, it can be replaced in just a few minutes. The first step is to power off the equipment and remove the spark plug wire. The cover should be removed to get access to the wound spool assembly. Switch it out with the replacement part.This wound spool assembly is sold as an individual part. It is a genuine OEM replacement part that is directly sourced from the manufacturer. The spool assembly is designed to be compatible with string trimmers and pole pruners manufactured by Poulan, Poulan Pro, and Husqvarna.

This part is a replacement air box cover. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part's intended use is to replace a broken or defective air box cover in backpack blowers.This cover protects the air box to prevent debris or contaminants from getting inside and negatively affecting the equipment. This part can become cracked or damaged over time and thus should be replaced. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this air box cover, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality plastic. This air box cover can be used with backpack blowers that have been manufactured by MTD, Craftsman, and other brands. Sold individually.

This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.

This muffler bolt is an OEM replacement part that is sourced directly from the manufacturer. These bolts secure the muffler cover to the muffler on chainsaws, trimmers, and other small engines found in lawn and garden machines. Regular use can cause the bolts to loosen and possibly fall out of the cover. The muffler cover requires two bolts to secure it. These bolts have a hexagon-shaped head and require a hex key or Allen wrench to install or remove them from the cover.The muffler on small engines softens the noise coming from the machine. Being exposed to loud noise for long periods can lead to hearing damage. The muffler helps lessen this risk. The muffler cover protects the inner parts of the muffler. Rain, snow, dirt, and debris can cause rust and corrosion. Use the Allen key or hex wrench to loosen the muffler bolt if it is rusted or bent. Install the new bolt and tighten it using the hex wrench. The muffler bolt is made of high-quality steel and it sold as an individual part. The muffler cover requires two bolts to secure the cover. This bolt is compatible with chainsaws, hedge trimmers, and other small engines manufactured by Poulan, Weed Eater, and Husqvarna.

These ignition screws are used in the ignition systems on a variety of lawn and garden equipment. The screws are made of durable metal and fasten together different parts in the ignition system. While the screws are made of high-quality material, they can experience stress, wear and tear, and impacts that will break or damage them.To replace an ignition module screw, the garden tool will need to be disassembled. First, it should be turned off and placed on a flat surface. The spark plug wire should be disconnected before making the replacement. The ignition assembly will need to be taken apart to reach the ignition module screw. Use a screwdriver to remove the old part and replace it with a new replacement screw.This is an authentic OEM replacement component that is sourced directly from the manufacturer. The part is sold as an individual unit. Each ignition module screw is designed to be used with hedge trimmers, string trimmers, leaf blowers, edgers, and pole pruners created by Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater.