Need Help?
Call or text
Plastic choke lever for gas line trimmers and edgers. Actuates the choke valve to limit airflow during cold starts. Replace if cracked, broken, or damaged.
Usually ships within 4 - 14 days
Wire harness assembly connects ignition module to engine switch on chainsaws. Replace if wires are frayed, damaged, or connections are loose or corroded.
I replaced the ignition module and flywheel. While I had it open, I also replaced the hub starter which was a cause of the pull starter slipping a bit. The flywheel is "pressed" on, but there are numerous videos on the internet on how to quickly and safely remove it using simple hand tools and likewise, how to adjust the clearance between the module and the flywheel. The case screws look like they are "star driver" needy, but my slot is cut in them which will accommodate a medium, #2 flat blade... Read more
Chain won't stop when brake is engaged? This chain brake kit tightens around the clutch drum to stop the chain immediately on kickback. Moderate install.
Took the side cover off, noticed the chain brake assembly was damaged from the heat. Also after removing the clip securing the clutch drum I couldn't remove it. Had to use my biggest flat head screwdriver to force the drum off. The inner bearing was shot and the outer rim was worn with a lip on the bottom, reason it wouldn't come off the clutch. Because the parts were so worn out disassembly was difficult, but the new parts went on quickly. Soon I was back in business and the saw is working... Read more
Complete gasket set for chainsaws seals engine components during motor service or repair. Replace when servicing engine to prevent fuel leaks. Verify fit.
Ordered plastic tubes, filter, gas cap, new carb. Read more
This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.
Ignition module for gas line trimmers. Generates high voltage pulses to fire the spark plug. Replace if cracked, corroded, or physically damaged.
Air filter catches debris and dirt entering your chainsaw engine, preventing damage and buildup. Replace when dirty or clogged for optimal performance. Verify fit with your model number.
This is a replacement leaf blower tube. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective leaf blower tube on a variety of different leaf blower models. This tube makes up part of the vacuum attachment assembly. It links the vacuum bag directly to the lower tube. This part can become worn with regular use and may require replacement. It is always recommended that the appropriate safety precautions are adhered to when attempting to fix any power tools or machinery. For more accurate information on how and where to install this mulcher kit, refer to the appropriate owner's manual and included diagrams.As an authentic replacement part, this leaf blower tube is suitable for use on several different lawnmower models manufactured by Husqvarna and Craftsman. This is a genuine part made of high-quality, durable materials and is sold individually.
Foam air filter for gas leaf blowers. Replace when engine sputters, loses power, or runs rough. Washable and reusable. Verify fit by model number.
Piston ring seals the space between piston and cylinder wall in gas-powered outdoor power equipment engines. Replace if worn, cracked, or causing smoke.
Heavy metal flywheel assembly connects to the rotating shaft to regulate power delivery from the motor. Replace if cracked, damaged, or worn from use.
If your trimmer engine runs but the cutting head won't spin, the driver spring may be worn or broken. This spring transfers engine power to the head.
If your leaf blower won't move air or has weak airflow, the fan blade may be damaged. This impeller creates the airflow that moves debris effectively.
Trimmer head reel for gas line trimmers. Spools and houses cutting line. Replace if cracked, broken, or worn. Slides into housing for easy installation.
Once the replacement part came in, I just had to slide the new one into place and reinstall the bump and the weed whacker is as good as new. Read more
Fix reduced engine performance and rough running on your leaf blower or trimmer. This replacement air filter prevents dust from entering the engine.
This is a genuine replacement screw designed for use in select MTD engines on lawn and garden equipment. Specifically, this is an anti-rotation screw, which is used to stop the drive shaft housing from turning inside of the main housing assembly. This screw is a small part that is subject to constant vibrations, pressure, and high temperatures. It can sometimes become worn or damaged as a result or even break off entirely, which would mean that the inner housing would no longer be held in place accordingly. If this screw is damaged or lost, it needs to be replaced with a genuine OEM replacement as soon as possible. This MTD anti-rotation screw is manufactured with high-quality materials and designed for use in select trimmers from MTD, RYOBI, Yard-Man, Troy-Bilt, Murray, Cub Cadet, Yard Machines, and Bolens. This replacement will require a screwdriver. Simply remove the damaged screw, if it is not already missing, from the clutch cover assembly, and then install the new screw. It should only take a few minutes to perform the replacement. Be sure to wear gloves to protect the hands. This screw is sold individually and does not include any additional parts or hardware.