Parts for Ge JEM25BF02: 01 - Microwave Parts

This 250V 15A safety fuse protects the appliance's line circuit from overcurrent. When the original fuse has blown, replacing it can restore power and help safeguard internal components from further damage.

• Opens the circuit if excessive current

This interior oven lamp provides bright, direct lighting inside the oven cavity so you can monitor cooking without opening the door. Direct replacement designed for compatible GE ovens and ranges. What it does:

• Lights the oven interior so you ca

Microwave turntable stopped spinning or rotating? This turntable motor drives the glass tray for even heating. DIY-friendly replacement restores rotation.

Microwave shuts down during use? This thermal cutoff thermostat prevents overheating by interrupting power when temperatures exceed safe limits.

Secures components inside the microwave frame to keep assemblies aligned and stable. Replace if your original bracket is bent, cracked, or missing.

Wire saddle secures and organizes internal wiring in your microwave. Replace if the clip is cracked, broken, or missing to properly route and hold wires.

Interior door lever mechanism that connects the push button to the door latch assembly. Replace if cracked, broken, or no longer engaging properly.

Replacement drive coupler for microwave turntable systems. Connects motor to turntable shaft. Replace if cracked, stripped, or broken to restore rotation.

White plastic clip plug for microwave interior. Installs to secure components or cover mounting holes. Order a replacement if original is cracked or missing.

The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.  

Causes of failure involve degradation

The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.

Fix a microwave that won't heat or hums but doesn't start. This capacitor stores energy for the high-voltage circuit. Moderate DIY repair, 30-60 minutes.

This Bracket HVC is the OEM mounting bracket that secures the HVC assembly in place, keeping related components aligned and reducing vibration or movement for reliable operation. What it does

• Secures the HVC assembly or housing to the appliance frame to prevent shifting or loosening
• Helps maintain proper alignment of adjacent components for consistent performance
• Reduces vibration and rattling that can occur when a bracket is missing or damaged
• Commonly replaced when the HVC housing is loose, noisy, or does not sit flush

• One Bracket HVC mounting bracket

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Basic hand tools are typically required; handle metal edges carefully to avoid cuts
• Inspect mounting screws or clips and replace if worn to ensure a secure fit

Black plastic foot that supports and stabilizes your microwave. Installs on the bottom corners. Replace if cracked, broken, or missing for proper leveling.

Base plate for microwave interior. Mounts beneath the turntable assembly to support components. Replace if cracked, warped, or broken. Direct fit part.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

Replace your microwave's power cord assembly if the original is damaged, frayed, or missing. Plugs into the back of the unit for electrical connection.

Color: brown. Measures about 8 inches in diameter.

Microwave not heating but lights and fan work? Buzzing noise when running? The magnetron generates microwaves to cook food. Moderate DIY repair difficulty.

Turntable glass tray. Color: clear. Size. 11-1/2 inches diameter.

Replacement screen for your microwave door. Installs behind the glass panel to protect internal components. Order a new screen if yours is damaged or missing.

A replacement outer door frame that restores the door's exterior trim and secures the door glass for a finished, factory appearance. Use this OEM-style frame to replace cracked, dented, or worn outer trim on compatible GE doors. What it does:

• Replaces the damaged or cosmetic outer trim around the door, improving appearance
• Holds and supports the door glass and inner components in place
• Helps re-establish proper door sealing alignment when combined with intact inner parts
• Addresses visible cracks, dents, or separation between frame and door glass

• One door outer frame

• Disconnect power to the appliance before starting any door repairs
• Handle glass and frame edges carefully; wear gloves and eye protection
• Installation typically requires removing the door from hinges and detaching inner trim or screws
• Inspect inner frame, gasket, and glass for damage and replace any worn components for best results

Replacement choke cover for microwave doors. Installs around the door perimeter to shield internal components. Order when original is cracked or missing.

Fix a microwave door that won't close or latch properly with this door latch assembly. Solves issues with doors not staying shut or secure during operation.

This is a full main door assembly that replaces a worn, damaged or broken appliance door to restore a secure, sealed closure and normal operation. Fits as the complete door unit used on compatible GE appliances. What it does:

• Provides the full door structure including panels and internal components needed to close and seal the appliance
• Restores proper door alignment and secure latching when the existing door is bent, loose or won't stay closed
• Replaces doors with cracked or damaged exterior glass or frame that affect appearance and function
• Helps prevent heat/steam loss and improves safety when the original door is compromised

• Disconnect power and ensure appliance is cool before attempting replacement
• Door assemblies can be heavy or awkward; have a helper for alignment and installation
• Handle glass and trim carefully to avoid damage or injury
• Use factory fasteners and follow OEM instructions for proper fit and sealing

Complete microwave door assembly that installs as the main door unit. Replace your cracked, broken, or damaged door to restore proper closure and appearance.

This control panel assembly houses the oven/clock controls and user interface for a GE electric range, restoring visible buttons, display and control functions so the range accepts cook settings and timers again. What it does:

• Replaces the front control panel and associated button/display surface used to select oven and timer functions
• Restores unresponsive or damaged buttons, faded markings, or cracked panel appearance
• Works with the range's control electronics to send user commands to the oven control board
• Commonly used when the touchpad or display area is broken, worn, or cosmetically damaged

• One control panel assembly (white) as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Basic disassembly of the oven console is usually required; handle clips and connectors gently
• Retain and reconnect any grounding or ribbon connectors exactly as removed

Single push button for microwave control panels. Replaces worn, stuck, or broken buttons to restore tactile control and responsive input on your appliance.

Replace your microwave's control panel button if the original is cracked, broken, missing, or worn. This push button installs on the front panel.

Mounting bracket for microwave installation. Secures microwave to wall or cabinet. Replace if bent, broken, cracked, or missing for proper support.

Under-cabinet mounting kit for microwaves. Provides hardware and brackets to securely install your microwave beneath kitchen cabinets. Replacement kit.