Parts for Ge JES1456BJ01: 01 - Microwave Parts

The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.

Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.

Symptoms of a bad fuse include:

• The microwave suddenly stops working.
• No signs of power or response even when the microwave door is closed and the start button is pressed.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix a noisy or non-functioning microwave with this fan motor. Solves overheating and cooling issues. Moderate DIY repair with basic tools required.

Microwave not heating food? The magnetron generates microwaves for cooking. This moderately difficult repair restores heating in about 1-2 hours.

Replacement air cover (air baffle) for microwaves. Directs airflow and protects internal components. Order when original is cracked, damaged, or missing.

Door lever for microwave ovens. Installs on the door latch assembly to operate the release mechanism. Replace if broken, cracked, or missing.

Microwave not heating food? The high voltage capacitor often fails alongside the diode or magnetron. DIY repair in 1-2 hours can save hundreds.

Microwave not heating but lights and timer work? The high voltage diode converts AC to DC for the magnetron. DIY repair in 1-2 hours with basic tools.

Replacement glass turntable tray for microwaves. Rotates during cooking to heat food evenly. Order a new tray if yours is cracked, chipped, or broken.

Replacement guide roller assembly for microwave turntables. Restores smooth rotation when the original roller is cracked, broken, or missing.

Microwave turntable coupler that connects the motor shaft to the glass tray. Replace if cracked, broken, or worn to restore proper tray rotation.

Black plastic foot that supports and stabilizes your microwave. Installs on the bottom corners. Replace if cracked, broken, or missing for proper leveling.

Replacement foot for microwaves. Installs on the bottom to provide stable support and elevation. Order a new foot if your original is cracked or missing.

Microwave turntable stopped spinning or rotating? This turntable motor drives the glass tray for even heating. DIY-friendly replacement restores rotation.

Replacement power cord for your microwave. Connects the unit to your wall outlet. Order a new cord if yours is damaged, frayed, or missing.

Restores your microwave door's appearance with this thin decorative film. Covers scratches and discoloration. Verify fit with your model number.

Fix a microwave door that won't close or latch properly with this white door latch assembly. Common DIY repair taking 15-30 minutes with basic tools.

Fix a microwave that won't heat or has no power with this low voltage transformer. Common repair for dead displays and control panel issues.

Replace a cracked, stuck, or missing push button on your microwave's control panel. Restores tactile response for reliable cycle selection and operation.

The Monitor Switch is an OEM replacement part for GE microwave ovens. Located internally on the turntable control circuit board, this switch monitors rotation of the turntable during cooking cycles.  

Causes of failure involve degradation of the electrical contacts from continuous arcing loads over years of use combined with vibration stresses.

Symptoms of a faulty monitor switch include:

• The turntable no longer rotates or spinning intermittently
• Cooking cycles aborting prematurely with error messages 
• Screeching or grinding noises emanating from beneath cavity
• Visible burnt spots on turntable drive assembly

This genuine GE switch is also compatible with select Hotpoint and RCA models.

The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.

Symptoms of a failing Microwave Door Switch include:

• The microwave not starting or heating
• Running when the door is opened
• Unusual noises when the door is closed  

Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Replacement thermostat that senses and controls the appliance heating system to restore accurate heating and stable temperature cycles, helping the appliance reach and maintain the set temperature. What it does:

• Senses temperature and signals the heating element or valve to turn on/off to maintain set temperature.
• Commonly linked to symptoms such as failure to reach set temperature, temperature fluctuating or cycling erratically, or continuous heating.
• Works as the temperature-regulation component in the appliance's control pathway to stabilize performance.
• Matches the OEM function for temperature control; use when thermostat diagnostics indicate a failed or inaccurate sensor.

• Disconnect power to the appliance before attempting removal or installation to avoid shock or ignition hazards.
• Handle the sensing element and terminals carefully to avoid damage; ensure secure electrical connections and proper routing of any capillary or sensor lead.
• After installation, test the appliance through a full heat cycle to confirm correct operation.

Fix sensor cook cycles that won't adjust properly or show sensor errors. This humidity sensor monitors moisture levels for automatic cooking adjustments.