Parts for Ge JVM1542BF002: 01 - Microwave Parts

Replace your microwave's light bulb to restore interior visibility and monitor cooking without opening the door. Fits specific GE models—verify compatibility.

Removes grease, smoke, and odors from your microwave's ventilation system. Replace when clogged or discolored. Confirm fit with your model number.

This factory glass panel replaces a cracked, shattered, or missing original, restoring a clean, safe cover/viewing surface on your appliance. It helps protect internal areas from splatter and keeps the assembly looking and fitting the way it should.

• Replaces a damaged glass component within the original assembly on applicable models
• Restores a clear, smooth surface for proper appearance and function
• Helps shield underlying parts from spills, grease, and debris
• Common symptoms: cracked or shattered glass, missing piece, sharp edges, looseness/rattling

• Disconnect power before servicing; allow all surfaces to cool
• Wear cut-resistant gloves and eye protection; handle edges carefully
• Support the panel/door during removal and installation to prevent stress on frames/hinges

Lamp mounting bracket for microwaves. Secures the interior light bulb assembly in place. Replace if cracked, broken, or missing to properly mount the lamp.

Fix inconsistent heating or temperature problems in your microwave oven with this thermostat. Regulates temperature cycles for accurate cooking results.

The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.

Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running. 

Symptoms of a bad Door Interlock Switch include:

• Microwave does not start
• Microwave stops unexpectedly
• The microwave operates with the door open
• Microwave turns on but does not heat food

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.

This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:

• Secures panels, brackets, or component mounts to restore proper alignment and support
• Stops rattling, vibration, or loose hardware caused by damaged or missing rivets
• Provides a durable mechanical fastener where original rivets have sheared or loosened
• Helps maintain safe operation by keeping parts properly retained

• Disconnect power (and gas/water if applicable) before attempting any repairs
• Removal may require drilling out the old rivet; installation typically needs a rivet gun or equivalent tool
• Keep hardware orientation the same as the original; replace any damaged surrounding parts

The Fuse is an OEM part for GE microwaves. It serves as a safety device designed to protect the microwave from excessive current that can cause overheating and potential fire hazards. When the current flowing through the microwave circuit exceeds a certain level, the fuse blows or breaks, cutting off the power to prevent damage or fire.

Common causes for a fuse to blow include power surges, faulty wiring within the appliance, or the use of microwave inappropriate containers that cause sparks. It is essential to address these issues not only to replace the fuse but also to correct the underlying problems to prevent future failures.

Symptoms of a bad fuse include:

• The microwave suddenly stops working.
• No signs of power or response even when the microwave door is closed and the start button is pressed.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Microwave not heating? A failed diode prevents the magnetron from generating heat. This high-voltage component converts AC to DC power. DIY repair.

Connects microwave ventilation system to ductwork. Mounts at top or rear of unit. Replace if cracked, broken, or missing for proper airflow.

Controls airflow in your microwave's venting system. Installs in the duct assembly to regulate steam and moisture release. Replace if cracked or missing.

Mounting bracket for over-the-range microwaves. Secures unit to cabinet or wall. Replace if bent, cracked, or missing to ensure safe installation.

This is a bracket only. For magnetron protector order WB27X10506.

Fix a microwave vent fan that won't run or makes loud grinding noises with this ventilation motor. Moderate repair typically takes 30-45 minutes.

Uneven heating in your microwave? The stirrer motor rotates the antenna to distribute microwaves evenly. Moderate DIY repair restores uniform cooking.

Replace your cracked, broken, or missing microwave glass cooking tray. Sits on the turntable to hold food during heating for even rotation and cooking.

Female D shaft

The Thermostat is an OEM part for GE ovens. This critical component functions as a temperature sensor and controller within the oven, ensuring that the oven heats to the set temperature and maintains it throughout the cooking process. The thermostat prevents the oven from overheating by cycling the heat on and off as needed. 

Symptoms of a failing thermostat include:

• Oven not reaching the desired temperature
• Overheating beyond the set temperature
• Uneven cooking or baking results
• Oven temperature fluctuating more than usual

Causes of thermostat failure generally include age-related wear and tear, calibration issues, or exposure to extreme temperatures that can damage its internal components.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Mounting screw that secures the power control module inside your microwave. Replace if screw is stripped, missing, or damaged during repairs or maintenance.

Truss head tapping screw for microwave assembly and panel mounting. Replace missing, stripped, or damaged screws during repairs or maintenance work.

Truss head tapping screw for microwave assembly. Secures internal components and panels. Replace if screw is stripped, missing, or lost during repair.

Truss-head self-tapping screw for securing microwave panels, trim, and brackets. Replace lost or damaged mounting screws to restore fit.

Mounting support plate that secures the control panel assembly in your microwave. Replace if cracked, warped, or broken to restore proper alignment.

Captures cooking odors and particles in recirculating mode. Replace when airflow weakens or odors persist. Installs behind grille in slot.