Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Norge Axle, Roller, Pulley Parts

Best Seller
Norge Thrust Bearing Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002213

The Thrust Bearing Kit is an OEM part for Whirlpool washing machines. This kit is essential for the proper operation of the washer's transmission system, allowing the drive system to engage smoothly and efficiently. 

Over time, components within the thrust bearing kit can wear down or become damaged due to the constant stress and movement they endure during the wash cycle. This wear can lead to issues with the washing machine's ability to agitate or spin correctly.

Symptoms of a bad Thrust Bearing Kit include:

  • The washing machine is noisy during operation
  • The washer struggles to agitate or spin
  • The washing machine may fail to spin at all, leaving clothes wet at the end of the cycle
  • Excessive vibration during use

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms
  • Spins slowly
  • Pumps but will not spin
  • Will not agitate
See more...
Do-It-Yourself Stories from Customers like You Washer squeaked when tub is stopped during spin cycle   Daniel K. • Grafton , WI • July 22, 2018

My Maytag washer make a loud screech when the washer tub needed to be stopped by the brake. Last year, I had replaced the suspension springs, the snubber ring, the drive belt and the drain pump. Those repairs worked fine, but a few weeks later, the screeching noise started. So I figured it was the brake system. I thought it would be better to replace the brake rotor and stator together as a set since I was going to disassemble both and they were 18 years old anyway. I decided to replace the... Read more

More
$43.95
Compare At:
$59.58
You Save:
$15.63

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Upper Dishrack Wheel Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP903093

The Upper Dishrack Wheel Assembly is an OEM part for Whirlpool dishwashers. This assembly includes the wheels and the bracket that attaches to the upper dishrack, allowing it to slide in and out smoothly. It ensures the stability and ease of use of the upper dishrack, making it easier to load and unload dishes.

Causes of a bad upper dishrack wheel assembly can include wear and tear from regular use, exposure to high heat and moisture, or physical damage such as cracks or broken wheels. When the wheel assembly is compromised, it can hinder the movement of the upper dishrack, making it difficult to operate.

Symptoms of a bad upper dishrack wheel assembly include:

  • Difficulty sliding the upper dishrack in and out
  • Upper dishrack coming off its tracks
  • Noisy or uneven movement of the upper dishrack
  • Visible damage or broken wheels

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Top rack of the dishwasher rusted through   Gary S. • Little Chute , WI • October 26, 2014

Got the make and model. Put it in your web site order form and watched the video. The part came the replacement part was made and job done. Thanks. Great parts, fast shipment and again job done. Read more

More
$10.95
Compare At:
$13.14
You Save:
$2.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Washer Motor Pulley
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001108

This is a plastic push-on washer motor pulley.

Do-It-Yourself Stories from Customers like You Motor pulley broke witch strest my drain pump and broke that burned my belt   Vicki A. • Muskegon , MI • November 07, 2014

Acualy sounded and looked major but with a littel help with you tube the job only took 30 minutes. 3 bolts for the water pump pulley broken pulley poped off new one klick into place simple belt install good to go. Parts saved me $40 and where here in only 2 days. I couldnt be happyer. Read more

More
$22.95
Compare At:
$27.31
You Save:
$4.36

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Idler Pulley (Belt Tensioner)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001344

This replacement idler pulley keeps the drive belt tight and tracking correctly so the drum can rotate smoothly. It restores quiet, consistent operation when the original pulley is worn or seized and causing belt slippage or noise.

  • Maintains proper tension on the drive belt to enable smooth drum rotation
  • Provides a low-friction surface for the belt to ride on and stay aligned
  • Common symptoms of failure: squealing/chirping, belt fraying or coming off, burning rubber smell, or a drum that won't turn
  • Replace if the pulley wobbles, binds, or the rim/bearing is worn
What's included: 1 idler pulley Install notes:
  • Disconnect power; if gas, shut off the gas supply
  • Note belt routing, relieve tension from the idler arm, and remove the belt from the motor pulley
  • Remove the retaining hardware from the old pulley, install the new pulley on the idler arm shaft, and re-tension the belt
  • Manually rotate the drum to verify smooth belt tracking before reassembly and test run

Do-It-Yourself Stories from Customers like You Crazy squealing noise while dryer was spinning took drum out and the roller and shaft was worn on the left side while i had it apart i noticed a crack in the pulley idler   William H. • Buffalo , NY • December 27, 2014

Decided to order the kit with both rollers even thou the right one looked OK.Also ordered the pulley for the idler. Watched the video for the pulley installation,super helpful on a couple of the steps!! Everything went great. A 14 year old dryer still has life! Parts ordering and delivery was also great!!! Thank you. Read more

More
$46.95
Compare At:
$55.87
You Save:
$8.92

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Idler Assembly (Belt Tensioner)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-2287

This idler assembly is the spring-loaded belt tensioner that keeps the drive belt correctly tightened. Replacing a worn or seized idler restores smooth belt tracking, reduces squeal, and helps prevent slippage or loss of drive.

  • Maintains proper tension on the drive belt for reliable power transfer
  • Helps prevent belt slippage, squealing, or the belt coming off the pulleys
  • Supports smooth rotation of the driven components
  • Failure symptoms can include noise from the belt path, a frayed or derailed belt, or loss of motion
What's included: 1 idler assembly Installation notes:
  • Disconnect power and allow all moving parts to stop before servicing
  • Access the belt path; relieve belt tension and remove the old idler assembly
  • Install the new assembly; ensure the pulley spins freely and the belt is centered in the groove
  • Manually rotate the system to verify alignment and clearances before restoring power

Do-It-Yourself Stories from Customers like You The front drum slides rear wheels where both wore out also needed a new filter screen   Bryan B. • Ville Platte , LA • March 05, 2016

Un plugged dryer. It was an easy fix, popped the top up. Removed the two screw that held the front on and also unclipped the door switch. Released tension that was on belt and removed drum. Removed old front slides cleaned up area and replaced them. Popped the ring that held the rear drum wheels and placed the new ones with a dab of grease. Un hooked tension spring for idler and removed old one and put the new one in. Make sure you place it through the correct hole and it makes it firmly into... Read more

More
$98.46
Compare At:
$117.17
You Save:
$18.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Tub Wheel Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002947

Attaches to the inner tub for the upper rack

Do-It-Yourself Stories from Customers like You Hose connection finally went bad at faucet   Mike H. • Bellefontaine , OH • August 22, 2016

I got the new hose with connection at faucet in only 2 days after ordering. After taking the top and sides off if the dishwasher it only took 10 minutes to replace the hose. It actually took longer to disassemble and reassemble the top and sides but even that was easy. 45 minutes total. Just use your cell phone to take a picture of how the old hose is routed before installing the new one and have 2 small zip ties to keep loose wires away from hose. Read more

More
$13.95
Compare At:
$16.74
You Save:
$2.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Tub Wheel (Dishwasher), Single
Genuine Whirlpool part
By: Whirlpool
Part Number: WP99002342

This tub wheel mounts on the dishwasher's tub wall to guide and support the rack as it slides in and out. Replacing a worn wheel restores smooth rack movement and helps prevent binding, noise, and derailments.

  • Mounts to the tub to provide rolling support for the dish rack/rail
  • Replaces cracked, flattened, or missing wheels that impede rack travel
  • Helps fix racks that stick, bind, are hard to pull/push, or derail
  • Reduces grinding or squeaking from the rack area
What's included: 1 tub wheel
  • Disconnect power at the breaker before servicing
  • Open the door and pull the rack forward for access
  • Release the old wheel from its retainer/axle per your model's design; install the new wheel in the same orientation
  • Ensure the wheel spins freely and the rack slides smoothly before use

More
$6.95
Compare At:
$8.20
You Save:
$1.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Rear Support Assembly (Rear)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-0197

This rear support assembly stabilizes the appliance's rear housing and helps keep internal components aligned for smooth operation and reduced vibration. It restores proper rear-end support to prevent rubbing, noise, and uneven motion. What it does:

  • Provides a stable mounting point for the appliance's rear section to maintain alignment
  • Reduces vibration and rattling caused by a loose or worn rear support
  • Helps prevent rubbing, scraping, or grinding noises from misaligned components
  • Restores proper fit between the rear housing and moving parts to promote smooth operation
What's included:
  • One rear support assembly
Install notes:
  • Disconnect power (and gas if applicable) before beginning any repair
  • Access typically requires removing the appliance's rear panel or cabinet; follow OEM service manual steps
  • Inspect surrounding mounting hardware and replace any worn fasteners for a secure fit

Do-It-Yourself Stories from Customers like You Squeaking badly   Garth M. • Anson , ME • January 24, 2015

Replaced the roller and shaft. The roller had worn 1/4 of the way through the support shaft. Read more

More
$51.27
Compare At:
$61.01
You Save:
$9.74

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Pulley (Idler)
Genuine Whirlpool part
By: Whirlpool
Part Number: W10143344

This idler pulley guides and maintains tension on the dryer drive belt so the drum spins smoothly and quietly. Replacing a worn pulley restores proper belt tracking and helps prevent belt wear or breakage. What it does:

  • Maintains correct tension and alignment of the drive belt
  • Reduces squealing or grinding noises from a worn pulley bearing
  • Prevents belt slipping and uneven drum rotation
  • Helps avoid premature belt wear or burning rubber smells
What's included: One pulley. Install notes:
  • Disconnect power to the appliance before starting any work.
  • Access may require removing the dryer front or cabinet panels and releasing the belt; follow your model's service instructions.
  • Inspect the belt and drum support for wear and replace if needed while servicing.
  • Use basic hand tools.

More
$52.33
Compare At:
$62.27
You Save:
$9.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Support Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 53-0198

 

More

Norge Axle, Roller, Pulley replacement parts are essential for maintaining the efficiency of your appliances. These components play a critical role in ensuring that your appliance operates smoothly and performs at its best. Whether it's your washer, dryer, or any other major appliance, axles, rollers, and pulleys are key to the machine's functionality.

Norge parts are renowned for their high quality and reliability. The axles, rollers, and pulleys are designed to minimize friction, reduce wear and tear, and maintain the proper alignment of moving parts. This helps extend the lifespan of your appliance and prevents unexpected breakdowns.

Using OEM (Original Equipment Manufacturer) replacement parts can significantly enhance your appliance's performance. OEM Norge Axle, Roller, Pulley parts are designed to perfectly fit and function with your specific appliance model, ensuring optimal performance and durability.

Having access to reliable Norge Axle, Roller, Pulley parts is crucial for keeping your appliance running like new. These high-quality parts are readily available and ensure your appliance remains in top-notch condition, helping you avoid frequent repairs or replacements.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store