Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Norge Fuse Or Sensor

Best Seller
Norge Flame Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP338906

The Flame Sensor is an OEM replacement part for Whirlpool gas dryers. This component plays a critical safety role by monitoring the presence of the gas burner flame during the drying cycle.

Causes of needing to replace the flame sensor can include normal wear and tear over extended use, exposure to high temperatures or corrosion, or physical damage to the sensor itself.

Symptoms that may indicate a faulty flame sensor include:

  • The dryer not heating or producing heat properly
  • Error codes related to the gas system or ignition failure
  • The dryer shutting off unexpectedly during cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas dryer models. 

This part fixes the following symptoms
  • Shuts off too soon
  • No heat or not enough heat
  • Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You 11 year old kenmore elite gas drye stopped working initial diagnosis: burner would light but would shut off in 3 or 4 minutes   Jay W. • Dallas , TX • April 05, 2015

I used Fixya as an initial source describing my problem. I got two responses which were very helpful. One that the "coils" were probably the problem. Two, that the problem could be the thermostat or a thermistor in the dryer. I verified that AC was coming from the timing control, that both the two terminal and three terminal coils,the igniter and shut off thermostat all had continuity. I then applied AC directly to the coils: the two terminal coil ""clanked" and I interpreted that as the coil... Read more

More
$34.95
Compare At:
$41.59
You Save:
$6.64

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Oven Temperature Sensor Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001656

The Oven Temperature Sensor Kit is an OEM part for Whirlpool ovens. This sensor is essential for monitoring the oven's internal temperature, ensuring that it reaches and maintains the correct temperature for baking and cooking. The sensor is approximately 7 inches long.

Over time, the oven temperature sensor can fail due to repeated heating and cooling cycles, exposure to spills or grease, or electrical issues. When the sensor malfunctions, it can result in inaccurate temperature readings, affecting cooking performance and food quality.

Symptoms of a bad oven temperature sensor include:

  • The oven not reaching the set temperature
  • Food cooking unevenly or not fully
  • The oven overheating or underheating
  • Error codes related to temperature issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms
  • Oven is too hot
  • Little to no heat when baking
  • Won't start
  • Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You Jenn Air stove JDS9860CDB00 error code 1d11 oven not shutting off.   Joe D. • New Berlin , WI • March 20, 2019

First of all Appliance Parts Pros is the best!! I would not have had the confidence to make this repair myself without their outstanding videos and Q&A sections on their website. And their prices for parts are very competitive. Like many stories on the website, my oven would heat up beyond the temperature set point. When it reached the target temperature, the lower heating element (I think this is the “bake” element) would shutoff, but the top element (“broil” element I believe) would remain on... Read more

More
$41.95
Compare At:
$49.92
You Save:
$7.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Oven Temperature Sensor
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001655

The Oven Temperature Sensor is an OEM part for Whirlpool ovens. It measures the oven's internal temperature and sends this information to the control board to maintain the desired cooking temperature. 

Causes of a bad temperature sensor can include exposure to high temperatures over long periods, electrical issues such as short circuits, or physical damage due to impact or mishandling.

Symptoms of a bad temperature sensor include:

  • Inaccurate temperature readings
  • Oven not heating to the set temperature
  • Oven overheating
  • Error codes displayed on the oven control panel

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Note: For the long 6-inch sensor order 12001656.

This part fixes the following symptoms
  • Oven is too hot
  • Little to no heat when baking
  • Won't start
  • Oven not heating evenly
See more...
Do-It-Yourself Stories from Customers like You Oven did not keep correct or consistently correct temperature   Keith J. • Antioch , IL • September 06, 2014

Online videos made this seem an easy fix. I unplugged the oven and removed the rear panel, then found where the temp sensor entered the oven. I unplugged the sensor's electric connector. Unlike the videos, this sensor screwed in from the inside of the oven, so I had to remove the 2 screws inside the oven which hold the sensor in place. Then I pulled the sensor out, careful not to tear the insulation with the wires and connector. Then I just pushed the new connector through the same hole and... Read more

More
$33.95
Compare At:
$40.40
You Save:
$6.45

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Dryer Thermostat Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: LA-1053

The Dryer Thermostat Kit is an OEM part for Whirlpool dryers. This kit includes a high-limit thermostat and a thermal fuse, both of which are crucial for regulating the dryer’s temperature. The high-limit thermostat prevents the dryer from overheating, while the thermal fuse will cut off power if a critical temperature is exceeded, ensuring safety. The kit includes a high-limit thermostat (WP53-0771) and two thermal fuses (WP53-1096 & WP53-1182).

Symptoms of a bad Dryer Thermostat Kit include:

  • The dryer not heating properly or at all, leading to clothes remaining damp after a cycle.
  • Overheating of the dryer, which can be dangerous and cause additional component failure.
  • The dryer stopping unexpectedly or not starting, indicating a blown thermal fuse.

Causes of issues with the thermostat or thermal fuse can include lint build-up that blocks proper airflow, faulty heating elements that cause temperature fluctuations, or general wear and tear that affects component integrity.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models,.

This part fixes the following symptoms
  • Too hot
  • Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You Thermal fuse blew due to lint blockage   Louis L. • Philadelphia , PA • March 21, 2017

I posted the following on the Facebook page ; SOoooo my 10 year old clothes dryer stopped and like almost everyone else I just figured it's shot, burned up, gotta get a new one. Well, due to a few bumps in the road I cannot afford another problem. My 2 vehicles are not running and with one being in the shop for 3 weeks and not being able to afford a rental car anymore this dryer was another headache. It sat for weeks and laundry started piling up. While looking online for sales somehow I... Read more

More
$41.95
Compare At:
$49.92
You Save:
$7.97

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Norge Thermal Fuse
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1182

The Thermal Fuse is an OEM part for Whirlpool dryers. This part prevents the dryer from overheating by cutting off power to the heating element if the dryer exceeds a safe temperature. It helps protect the appliance and home from potential fire hazards caused by overheating.

Causes of a bad thermal fuse can include lint buildup restricting airflow, a malfunctioning thermostat, or excessive load causing the dryer to overheat.  

Symptoms of a bad thermal fuse include:

  • Dryer not starting
  • Dryer not producing heat
  • Dryer shutting off mid-cycle
  • No power to the dryer despite other electrical components functioning

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting   Timothy E. • Bellvue , CO • September 15, 2019

When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was... Read more

More
$39.95
Compare At:
$47.14
You Save:
$7.19

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Cycling Thermostat (Control), Single
Genuine Whirlpool part
By: Whirlpool
Part Number: WP31001192

This cycling thermostat regulates on/off heat cycles to maintain consistent operating temperature. Replacing a failed thermostat restores proper temperature control and helps protect the appliance from overheating or underheating during normal operation.

  • Senses internal temperature and opens/closes contacts to control the heating circuit
  • Helps prevent overheating; supports stable, repeatable heat cycling
  • Common failure symptoms include no heat, overheating/shutting off too soon, or longer-than-normal run times
  • Electrical component—failure may be intermittent before complete loss of function
What's included: 1 cycling/control thermostat Install notes:
  • Disconnect power (and gas supply, if applicable) before service
  • Note wire locations; transfer connectors one at a time to the new thermostat
  • Mount firmly against the mating surface for accurate temperature sensing
  • After installation, verify proper operation and temperature cycling

This part fixes the following symptoms
  • Too hot
See more...
Do-It-Yourself Stories from Customers like You No heat on dryer low setting insufficient drying even on high extended times to dry   Thomas M. • Galax , VA • June 12, 2016

Ended up replacing the cycling thermostat which corrected the problem. Andrew C. was very helpful with considerations and return of unneeded parts as well as very informative technical assistance. Could not have been treated better. Read more

More
$78.95
Compare At:
$93.95
You Save:
$15.00

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Thermostat-Hi-Limit (Limit Thermostat), Single
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-0771

A high-limit thermostat that stops the dryer's heating circuit if internal temperatures get too high, helping prevent overheating and protecting heating components. Replaces a failed high-limit thermostat to restore overheat protection. What it does

  • Opens the heating circuit when dryer temperature exceeds the thermostat set point to prevent overheating.
  • Commonly related symptoms: dryer runs but produces little or no heat, dryer gets unusually hot, or the thermal cutoff repeatedly fails.
  • Works as part of the dryer's temperature-safety system to protect heating elements, fuses, and internal wiring.
What's included
  • One high-limit thermostat
Install notes
  • Disconnect power before accessing the dryer and work only after panels are cool.
  • Take a photo or label wires before removal to ensure correct reconnection.
  • Test the thermostat for continuity with a multimeter to confirm failure before replacing.
  • If other safety devices (thermal fuse, cycling thermostat, element) show symptoms, inspect and test those components too.

Do-It-Yourself Stories from Customers like You Dryer would not start   Homer G. • Meridian , MS • April 03, 2018

Replaced the themal fuse Read more

More
$63.57
Compare At:
$75.65
You Save:
$12.08

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge High Limit Thermostat (Limit Cut-Off)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1096

A high limit thermostat that stops heat when a dryer's temperature gets too hot, helping protect the heating system and cabinet from overheating. It's a direct-replacement thermostat used in many gas and electric dryer heater assemblies. What it does:

  • Opens the heating circuit if temperatures exceed safe limits to prevent overheating.
  • Helps protect the heating element, housing, and internal components from heat damage.
  • A failed thermostat can cause no heat or intermittent heating in the dryer.
  • Works with the dryer's safety controls to maintain normal operating temperature.
What's included: One high limit thermostat. Install notes:
  • Disconnect power (and gas if applicable) before servicing; allow unit to cool completely.
  • Located on or near the heater box or blower housing; follow your model's service manual for access.
  • Replace with the exact part number to maintain original safety settings.

Do-It-Yourself Stories from Customers like You Our Maytag gas dryer was not producing heat— specifically it was cycling off after initially lighting   Timothy E. • Bellvue , CO • September 15, 2019

When I pulled out the dryer from the wall, I could see dust/lint had accumulated everywhere and the vent system was compromised. I vacuumed up the dust/lint accumulation outside and then inside the vent system. I then opened the lower cabinet to clean and check its condition. I removed the water steamer bottle and its sub-assembly and then the drum. After cleaning and inspecting components — both visually and with a multi-meter I determined the problem was the appliance doing what it was... Read more

More
$48.95
Compare At:
$58.25
You Save:
$9.30

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Fuse (15A, 250V)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPY01050009

This 15 amp, 250 volt replacement fuse protects your appliance's electrical circuits by interrupting power when a fault or overload occurs. It restores safe operation once the underlying issue is fixed and the fuse is replaced. What it does:

  • Acts as an overcurrent protection device for circuits rated up to 15 A and 250 V
  • Prevents damage to wiring and components by opening the circuit during an overload or short
  • Common symptom: appliance has no power or specific functions stop working after a sudden failure
  • Replacing a blown fuse can resolve intermittent power loss or complete power failure tied to a single blown element
What's included: One 15A 250V fuse (single unit) Install notes:
  • Disconnect power to the appliance before inspecting or replacing the fuse
  • Replace only with a fuse of the same amperage and voltage rating to maintain safety and proper protection
  • Use insulated tools and avoid touching live terminals; internal access may require disassembly, follow OEM service instructions
  • If fuses blow repeatedly, stop using the appliance.

More
$12.72
Compare At:
$15.01
You Save:
$2.29

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge Cycle Thermostat (Temperature Control)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP53-1107

This cycle thermostat regulates temperature during appliance heating cycles to help maintain safe, consistent operation and proper cycle performance. It replaces a worn or failed thermostat to restore correct temperature control. What it does:

  • Senses and opens/closes at set temperatures to control heating during cycles
  • Prevents continuous heating when the thermostat reaches its limit
  • Can cause no-heat, overheating, or short cycling when faulty
  • Works with the appliance's control system to maintain cycle timing and safety
What's included: One cycle thermostat (single unit) Install notes:
  • Disconnect power to the appliance before inspecting or replacing the thermostat
  • Handle thermostat and terminals carefully; avoid bending sensing elements

Do-It-Yourself Stories from Customers like You Wouldn't run no power problem   Jan M. • Brewster , MA • February 02, 2016

I knew i had a bad thermal fuse when it wouldn't start, so i took it apart and noticed the belt was getting ready to break. i went online to your website and was able to get all the parts i needed at a good price, they said shipping would only take 1.7 days which actually turned into 5 but it was easy to fix once i got the parts. highly recomend them Read more

More
$50.22
Compare At:
$59.26
You Save:
$9.04

IN STOCK
Ships Today Guaranteed
Add to Cart
Norge High-Limit Thermostat (Hi-Limit Switch)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP7403P316-60

This high-limit thermostat (hi-limit switch) is a temperature safety device that stops the heating circuit if the appliance overheats, helping protect the unit and restore proper heat control when replaced. What it does:

  • Opens the heating circuit if internal temperature exceeds safe limits to prevent overheating.
  • Controls whether the heater/element receives power based on temperature.
  • When faulty, common symptoms include no heat or intermittent heating and repeated thermal cutouts.
  • Can be tested for continuity to confirm electrical function.
What's included:
  • One high-limit thermostat (hi-limit switch).
Install notes:
  • Disconnect power before inspecting or replacing; risk of shock or injury if energized.
  • Note and label wire locations or take a photo before removal for correct reassembly.
  • Verify part compatibility with your model before installing; confirm continuity after installation.

Do-It-Yourself Stories from Customers like You Older maytag oven would not heat up past 250 degrees   John T. • American Fork , UT • March 17, 2020

The same thing happened about two years ago and when I took off the back cover, the high limit switch was melted and crumbling, so I replaced it and it's worked fine until a couple of weeks ago. We smelled a stinky electrical burning smell a couple of times and then it stopped heating past 250 degrees. Turns out the high limit switch was crumbling again. This time I replaced both the high limit switch and the bottom element and it heats up again like it should to any temperature. One of the... Read more

More
$99.95
Compare At:
$119.94
You Save:
$19.99

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Norge fuse or sensor replacement parts are key components that ensure your gear stays in tip-top shape. These little parts might not seem significant, but they play a crucial role in maintaining the efficiency and safety of your Norge appliances.

Appliances like washers, dryers, and refrigerators benefit greatly from quality Norge parts. A Norge fuse helps protect the appliance's electrical system from unexpected surges, preventing potential damage. Similarly, a Norge sensor monitors key functions, ensuring everything runs smoothly and efficiently. Without these vital components, your appliance might face interruptions or, even worse, get damaged beyond repair.

When shopping for Norge parts, opting for OEM (Original Equipment Manufacturer) replacements is always a good idea. These parts are designed to match the specs of your appliance perfectly, ensuring both quality and compatibility. With OEM parts, you can trust that they will perform just as well as the original components your appliance came with.

High-quality and reliable Norge fuse or sensor replacement parts are readily available to keep your appliances running like new. It's all about ensuring your gear stays dependable and in perfect working order, without missing a beat.

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store