Parts for Lg WT7300CW/01: Outer Case Assembly Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

The Pulsator Cap is an OEM part for LG washing machines. It is designed to secure the pulsator (or agitator) in place, ensuring proper movement of the wash plate during the wash cycle. This component helps in the effective distribution of water and detergent, promoting thorough cleaning of clothes.

You should replace this pulsator cap if it becomes damaged, lost, or worn out. Causes of a bad pulsator cap can include regular wear and tear, exposure to heavy loads, or damage from improper handling. A compromised cap can lead to inefficient washing and potential damage to the pulsator.

Symptoms of a bad Pulsator Cap include:

• The pulsator becoming loose or dislodged
• Unusual noises during the wash cycle
• Clothes not being cleaned properly
• The washer experiencing imbalance issues

This OEM LG part is also compatible with Sears/Kenmore models.

The Customized Screw is an OEM part for securing the wash plate in LG washing machines. This screw maintains the wash plate's position and stability during the washer's operation. The Customized Screw ensures the wash plate performs efficiently, contributing to the effectiveness of the washing process by enabling proper agitation and circulation of clothes.

Causes of a bad Customized Screw can include wear and tear over time, especially from the constant motion and stress during the wash cycles.  

Symptoms of a bad Customized Screw include:

• The wash plate becoming loose or detached
• Ineffective washing due to improper motion of the wash plate
• Unusual noises during the wash cycle indicating a loose component

This OEM LG part is also compatible with some Kenmore models.

This damper controls airflow between compartments to help maintain consistent temperatures and efficient cooling. It replaces a worn or failed damper to restore proper air distribution and reduce temperature swings. What it does:

• Regulates airflow between freezer and fresh-food compartments for balanced temperatures
• Can cause uneven cooling or warm fresh-food compartment when faulty
• May click, stick, or fail to open/close if broken or obstructed
• Works with the refrigerator's control system to adjust airflow based on settings

• Disconnect power before beginning any service to avoid electric shock
• Handle the damper and housing carefully to avoid damage to plastic fins or linkage
• Note orientation and actuator connection before removal to ensure correct reassembly
• Test operation after reinstalling by restoring power and cycling temperature controls

Replace a damaged or stripped leveling foot with this leg assembly. It supports the appliance and adjusts for height so you can level it on uneven floors, restoring stability and helping reduce vibration, noise, and movement. What it does:

• Provides adjustable height to properly level the appliance
• Supports the cabinet/frame to keep all corners in firm contact with the floor
• Helps reduce rocking, walking, vibration, and rattling noises
• Fixes: appliance wobbles or is unstable; foot is cracked/missing; threads are stripped; cannot be leveled

• One leg assembly

• Disconnect power and, if applicable, turn off the water supply before servicing
• Carefully tilt or raise the appliance; protect the floor from scratches
• Unscrew the old leg; thread the new leg in by hand and adjust height to level
• Ensure all feet contact the floor firmly and the unit is stable before use

This hardware washer sits beneath a screw or nut to spread load and help keep fasteners tight inside your appliance. Replacing a bent or missing washer restores a secure fit and can reduce vibration-related noise. What it does:

• Distributes clamping force to protect mounting surfaces
• Helps resist loosening from vibration and movement
• Restores proper alignment when a washer is damaged or missing
• Common symptoms: loose or wobbling parts, rattling noises, screws backing out

• 1 washer

• Disconnect power; if working on a washer, also turn off water supply
• Note the original hardware stack order and take photos for reference
• Place the washer between the fastener head or nut and the part being secured
• Tighten to manufacturer guidance; avoid overtightening to prevent damage

This replacement holder is a small mounting bracket used to secure components inside the appliance, restoring proper alignment and support so parts sit firmly and operate as intended. Ideal when a cracked or worn holder causes instability. What it does

• Secures internal components or assemblies to prevent movement or vibration
• Restores proper alignment when a damaged holder allows parts to sag or shift
• Helps reduce noise from loose or unsecured components
• Commonly replaced when the original holder is cracked, broken, or missing

• Turn off and unplug the appliance before beginning any repair.
• Inspect surrounding clips and fasteners; replace any damaged hardware for a secure fit.
• Use appropriate hand tools; avoid forcing parts to prevent further breakage.

This replacement nut secures bolts or studs in your appliance. Replacing a missing or stripped nut restores a tight, reliable connection to keep brackets and assemblies stable and reduce vibration or rattling. What it does:

• Provides threaded retention for bolts/studs on panels, brackets, and assemblies
• Helps maintain alignment and stability during operation
• Typical failure signs: stripped threads, missing hardware, loose or rattling components, vibration
• Direct replacement for the original nut in the same location

• 1 nut

• Disconnect power before service; shut off the water supply
• Match thread size/pitch to the original; start threads by hand to avoid cross-threading
• Tighten with the correct tool; do not overtighten or damage mating parts
• Reinstall any washers/spacers in the original order and verify secure fit

This front panel assembly replaces a damaged or worn control panel fascia to restore the appliance's front appearance and secure the control components. It provides the mounting surface and openings for buttons, displays, and controls. What it does:

• Replaces cracked, broken, or warped front panel fascia that affects appearance or button access
• Restores proper mounting for control buttons and display windows
• Helps prevent debris from entering the control area and protects underlying electronics
• Useful when panel tabs or screw bosses are broken and the panel no longer secures correctly

• Disconnect power (unplug or turn off breaker) before starting any repair.
• Handle the panel carefully to avoid scratching painted or glass surfaces; use gloves if needed.
• Removal typically requires removing trim and screws; keep hardware organized for reassembly.

This genuine hardware washer installs at the specific joint shown in your model's parts diagram. It spreads clamp force and keeps the connection aligned and secure to support smooth operation of the related component. What it does:

• Distributes fastener load and protects mating surfaces from damage
• Maintains proper spacing and alignment within the assembly
• Helps resist loosening from vibration over time
• Clues it may be needed or worn: loose/rattling parts, unusual vibration or noise, or visible wear at the fastener location; on some models, seepage at that joint

• 1 washer

• Disconnect power and turn off water supply before servicing
• Support the assembly, remove the fastener, and install the washer in the same orientation
• Tighten the fastener snugly without overtightening; replace any damaged bolts, nuts, or seals

This decorative panel restores the outer trim and finish to your appliance for a clean, factory appearance. It replaces a damaged, dented, or faded trim piece so the exterior looks complete and neat. What it does:

• Covers the appliance front/edge for a finished appearance and conceals underlying components
• Replaces panels that are dented, scratched, or discolored from normal use
• Helps maintain proper fit and alignment of adjacent trim and control surfaces
• Prevents small gaps where debris could collect around the appliance opening

• Disconnect power to the appliance before starting any work
• Remove mounting screws or clips holding the old panel; handle edges carefully to avoid cuts
• Align panel tabs/clips and secure with original fasteners; do not force or pry on nearby components

This knob assembly is the replacement rotary control used to select settings on the appliance. It restores a worn, cracked, or missing knob to make dialing controls easy and accurate again. What it does:

• Replaces a damaged or missing control knob so you can select cycles, temperatures, or settings
• Provides a secure grip and tactile detents for reliable user control
• Helps stop slipping or loose operation caused by worn knobs or stripped splines
• Restores the appliance's original look and usability

• Turn off and unplug the appliance (or disconnect power) before replacing the knob.
• Pull the old knob straight off the control shaft; push the new knob onto the shaft until it seats.
• If the knob does not fit, do not force it—verify spline alignment and part compatibility.

The Drain Pump Assembly is an OEM part compatible with LG dishwashers. It is responsible for pumping water out of the dishwasher during the drain cycle. Located at the bottom of the tub, the drain pump works continuously throughout the cycle to remove dirty water and debris.

Symptoms of a bad drain pump assembly include:

• Incomplete or slow draining of water at the end of cycles
• Standing water or flooding at the bottom of the dishwasher tub  
• Loud vibrating or grinding noises coming from the drain pump area
• Poor cleaning performance due to inadequate water removal

Causes of a bad drain pump can be a failed motor, a clogged impeller preventing free spinning, or worn-out seals.

This OEM LG replacement part is also compatible with Sears/Kenmore.

This single wire harness connects electrical components to restore a secure signal and power path. Replacing a damaged harness helps stop intermittent operation and restores reliable function to the affected circuit. What it does:

• Provides a factory-style electrical connection between components
• Replaces damaged, frayed, or corroded wires that cause intermittent operation
• Helps resolve symptoms like no power to a circuit, control not responding, or sporadic operation
• Maintains proper routing and connector fit to reduce arcing and poor contact

• Disconnect power before servicing to avoid shock or damage
• Inspect connectors and mating terminals for damage before installation
• Route harness away from heat sources and moving parts; secure with existing clips

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

This suspension assembly supports the washer tub and helps stabilize the drum during fill and spin cycles, reducing excessive movement and noise. It restores proper alignment so the washer runs more quietly and evenly. What it does:

• Dampens tub movement and absorbs vibration during agitation and spin
• Keeps the tub centered to prevent rubbing, banging, or rocking
• Helps reduce unusual noises and wear caused by an unbalanced load
• Works with the machine's suspension points and mounts to maintain smooth operation

• One suspension assembly

• Disconnect power and water supply before beginning service
• Support the tub or drum to prevent sudden movement when removing the old assembly
• Remove the appropriate access panels and follow the OEM diagram for mounting locations and fastener torque
• Inspect adjacent mounts, springs and shocks for wear and replace if necessary

The Drain Hose is an OEM part for LG washing machines. This hose is essential for directing used water out of the washing machine and into the household drain system, ensuring efficient water removal after each wash cycle. The hose measures 67.5 inches in length.

Causes of a bad drain hose can include wear and tear from repeated use, blockages from debris or lint, or physical damage such as cracks or splits. A compromised drain hose can lead to water leakage, improper drainage, or even flooding.

Symptoms of a bad Drain Hose include:

• Water not draining properly from the washing machine
• Leaks or puddles of water around the washing machine
• Visible cracks or splits in the hose
• Unusual sounds during the draining process

This OEM LG part is also compatible with Sears/Kenmore models.

This is a factory replacement parts assembly designed to restore proper fit and function of a specific component group in your appliance. Use it to replace a worn, damaged, or missing original assembly and maintain reliable operation. What it does:

• Provides a complete, preassembled component group specified by the manufacturer
• Restores proper alignment, support, and operation of the associated parts
• Helps resolve issues like looseness, rattling, misalignment, or intermittent function
• Direct-fit replacement engineered to match the original design

• One parts assembly

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Refer to your model's service documentation for the exact location and procedure
• Handle sharp edges and components carefully; wear cut-resistant gloves
• Verify correct operation before final reassembly

This guide cover is a molded trim piece that shields and supports its mating guide/track, helping the assembly align and operate smoothly while protecting internal components from debris and damage.

• Protects the guide/track from wear and debris intrusion
• Helps maintain smooth alignment and operation of the moving assembly
• Can help resolve issues like rubbing, misalignment, or a loose/missing trim piece
• Restores a clean, finished look after damage or loss

• Unplug power and shut off water before servicing
• Compare the new cover to the original to confirm orientation
• Snap or screw into place per the unit's service manual; do not force
• Verify smooth travel and clearance after installation

The Lid Switch Assembly is an OEM component specifically designed for LG washers. This assembly includes the lid switch, which plays an important safety role by detecting when the washer lid is properly closed and locked. 

The lid switch assembly monitors the position of the washer lid and communicates with the control board to prevent operation if the lid is detected as open. It ensures the wash cycle only functions when the lid is securely shut, minimizing safety hazards.

Symptoms of a bad lid switch include:

• The washer fails to detect when the lid is closed
• Inability to select or start a cycle 
• Error codes related to the lid being open

Replacing the lid switch with this genuine OEM LG part can restore proper safety functions to your washer. This replacement part is also compatible with Sears/Kenmore models.

The Bellows Assembly is an OEM part for LG washers. The bellows assembly forms a watertight seal around the pump shaft to make sure water is properly drained from the washer tub during the spin cycle.

Causes of a bad drain pump bellows assembly can include split or cracked rubber from age, leaks that develop over time due to small cracks or porous areas of the bellows.

Symptoms of a bad drain pump bellows assembly include:

• Water not fully draining from the washer tub after cycles
• Excess water left in the tub requiring additional emptying
• Drips or leaks under the washer during or after draining
• Standing water or mold growth inside the pump housing

This LG part is also compatible with some Kenmore models.

This bracket assembly secures internal components to the appliance frame, restoring proper alignment and structural support for panels or shelves. Replacing a damaged bracket helps stop rattling, sagging, or misaligned parts for safer operation. What it does:

• Provides a stable mounting point to hold panels, shelves, or other internal parts in place
• Restores proper fit and alignment to reduce noise, vibration, and rubbing
• Prevents further wear by re-securing loose or sagging components
• Works with factory fasteners to maintain original structural support

• One bracket assembly as shown

• Before replacing, unplug the appliance or switch off power at the breaker to avoid electrical hazard
• Use appropriate hand tools; verify bracket orientation against removed part before tightening
• Keep all original screws and clips; only secure to factory mounting points
• If corrosion or additional damage is present, inspect adjacent parts and replace as needed

This bracket assembly secures and supports internal appliance components, restoring proper alignment and stability to parts that have shifted or come loose. It provides a direct replacement to maintain safe, reliable operation. What it does:

• Provides a sturdy mounting point to keep panels, modules, or assemblies properly positioned
• Helps eliminate rattling, misalignment, or loose component movement
• Restores intended structural support after impact or wear
• Works as a direct-fit replacement to return original fit and function

• One bracket assembly

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate tools and keep fasteners for a secure fit; replace damaged screws as needed
• Inspect surrounding components and wiring for damage before reassembly

The Detergent Box Assembly is an OEM part for LG washing machines. This part holds and dispenses detergent, fabric softener, and bleach at the appropriate times during the wash cycle, ensuring effective cleaning and care for your laundry.

Common causes of a bad detergent box include clogging or blockage from detergent residue, wear and tear from regular use, or damage to the dispenser mechanisms.

Symptoms of a bad Detergent Box Assembly include:

• Detergent, fabric softener, or bleach not dispensing properly
• Residue build-up in the detergent drawer
• Leaks or drips from the detergent box area
• Error codes related to detergent dispensing

This OEM LG part is also compatible with some Kenmore models.

The Nozzle Assembly is an OEM part for LG washing machines. Located inside the tub, this is the nozzles responsible for directing water spray during cycles.

Causes of a bad nozzle assembly can include clogged or blocked spray ports from residue buildup, cracks or breaks in plastic components from general wear, or damage like dents that disrupt water flow.

Symptoms of a faulty nozzle assembly include:

• Uneven or incomplete water distribution inside the tub
• Reduced spray pressure from certain areas
• Loud vibrations or rattling noises during the wash cycle

This OEM LG part is also compatible with some Kenmore models.

The Clutch Coupling & Housing Assembly is an OEM component for LG front-loading washers. This assembly contains the clutch coupling that links the motor to the drive components to rotate the washing drum. 

Symptoms of a bad clutch coupling include:

• The washing machine fails to agitate or spin clothes  
• Grinding or clanking noises occur during cycles
• The drum does not turn properly or feels obstructed
• Excessive vibration when spinning 

Causes of failure can be wear and tear over time, damage from loads that are too heavy or unbalanced, or debris buildup inside the housing.

Replace yours today with this genuine OEM LG assembly to restore optimal operation and prevent further wear. This replacement part is compatible with some Samsung, Frigidaire, and Kenmore models.

The Valve Assembly Inlet is an OEM part for LG washing machines. It controls the flow of water into the washer, allowing the machine to fill with the correct amount of water for each cycle. This ensures that your washer operates efficiently and effectively.

Over time, inlet valves can wear out or become damaged due to mineral deposits, electrical issues, or regular wear and tear.

Symptoms of a bad valve assembly inlet include:

• The washer not filling with water
• Slow or irregular water flow
• Water leaking from the valve area
• Error codes related to water intake on the washer's display

This OEM LG part is also compatible with Sears/Kenmore models.

This inlet hose channels household water into the appliance during the fill cycle. Replacing a cracked, brittle, or leaking hose restores a secure, leak-resistant path that helps prevent puddles and fill-related interruptions. What it does:

• Routes incoming water from the inlet valve into the appliance's internal water path
• Helps maintain a watertight connection when properly secured with clamps
• Typical failure signs: dripping or puddling under the unit, visible cracks/kinks/bulges, or lingering dampness
• A restricted or leaking hose can contribute to long fill times or incomplete cycles

• 1 inlet hose

• Disconnect power and turn off the water supply before servicing
• Place towels or a shallow pan to catch residual water
• Note the original routing and clamp locations; install the new hose the same way without twists or kinks
• Fully seat hose ends and secure clamps; restore water and run a brief fill to check for leaks

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

The Water Level Pressure Switch is an OEM replacement part for LG washing machines. It is an essential component that monitors and detects the water level within the washing machine tub during the wash cycle.

Symptoms of a bad water level pressure switch:

• Washing machine not filling with water or not stopping when the desired water level is reached
• Excessive water intake, leading to overfilling and potential leaks
• Error codes or indicators related to water level issues
• Washing machine not advancing to the next cycle due to incorrect water level detection

Causes of a bad water level pressure switch can include mechanical failure, electrical malfunctions, or blockages or debris preventing accurate water level readings.

This OEM LG part is also compatible with Sears/Kenmore washing machine models.

The Motor Stator Bolt is an OEM part for LG washing machines. This bolt secures the stator to the motor, ensuring the stability and proper functioning of the washing machine's motor assembly.

Causes of a bad motor stator bolt can include wear and tear over time, improper installation, or damage from over-tightening or impact. A compromised bolt can lead to instability in the motor, potentially affecting the washer's performance.

Symptoms of a bad motor stator bolt include:

• Unusual noises during the wash cycle
• Vibrations or shaking of the washer
• The motor not functioning properly or failing to start

This OEM LG part is also compatible with Sears/Kenmore.

The Motor Assembly is an OEM part for LG washing machines. This motor assembly is responsible for driving the rotation of the drum during the wash and spin cycles. It provides the necessary power and torque to ensure smooth and efficient operation, allowing your clothes to be thoroughly cleaned.

Symptoms of a bad motor assembly include:

• Drum not spinning or rotating properly
• Unusual noises during operation
• Error codes related to the motor

A bad motor assembly can occur due to electrical issues, mechanical failure, or other internal malfunctions. If you notice symptoms such as the drum not spinning or rotating properly, unusual noises coming from the washer during operation, or error codes related to the motor, it may be time to replace the motor assembly.

This LG replacement part is also compatible with select Kenmore models.
 

This genuine replacement parts assembly secures and organizes the appliance's internal components so they function together reliably. Use it to replace a worn or damaged sub-assembly and restore stable operation. What it does:

• Holds internal components in their proper position to prevent movement and wear
• Restores correct mechanical alignment that can stop unusual noises or vibration
• Re-establishes reliable connections between linked parts so the appliance runs normally
• Addresses symptoms such as rattling, loose internal components, intermittent operation, or parts that shift during use

• Disconnect power (unplug or shut off breaker) before starting any repair
• Follow the OEM instructions for disassembly and reassembly
• Use basic hand tools; avoid forcing fasteners or connectors to prevent damage

The HARNESS, MULTI is an OEM component designed specifically for LG washing machines. As an integrated wiring bundle, it facilitates communication between various washing machine functions simultaneously for coordinated cycles. Smooth signal transmission across motors, controls, and sensors through this custom harness is crucial for optimized cleaning.

Causes of a bad multi-function harness may include pinched or chafed insulation from repeated door openings. Constant vibration could also cause wire fractures or loose connections over extended use. 

Symptoms of a bad multi-function harness include:

• Individual components like agitators or pumps failing to respond  
• Incomplete or ineffective wash cycles from lack of coordination
• Strange noises or behaviors as systems experience disruption
• Inability to control settings or fill/drain water properly

Replace yours today with this genuine LG wiring solution. Smooth, multi-faceted communication restores thorough, gentle washing performance. Compatible with Sears/Kenmore units as well.

This is a common nut used to secure appliance components and fasteners, restoring a tight connection for safer, quieter operation. Replaces a worn or missing nut to help stop loose panels, rattling, or shifting parts. What it does:

• Secures brackets, panels, or fasteners to keep components properly mounted
• Restores clamping force to prevent vibration-related noise
• Helps stop loose or wobbly parts that can lead to component wear
• Small hardware replacement for routine repairs and reassembly

• Disconnect power and water before starting any repair
• Use the correct socket or wrench size to avoid rounding the nut
• Thread onto matching bolt stud; tighten until snug—do not overtighten
• If threads are damaged, replace both nut and mating fastener

This is a small flat hardware washer used with fasteners to distribute load and prevent loosening on appliance assemblies. It helps keep screws and bolts seated for a secure, stable connection. What it does

• Sits under a screw or bolt head to spread pressure and protect the mating surface
• Helps prevent fasteners from pulling through soft or thin materials
• Reduces loosening from vibration when paired with the correct screw or bolt
• Can eliminate play or rattling where a missing washer allowed movement

• One flat washer as pictured

• Disconnect power before servicing the appliance and follow manufacturer safety instructions
• Replace only with the same style and size washer for proper fit and function
• Hand tools are normally sufficient; ensure fasteners are tightened to the OEM recommendation
• If multiple washers are missing or damaged, inspect surrounding hardware for wear

This cover cap is a small trim piece that snaps into place to protect and conceal fasteners and internal components, restoring the appliance's finished appearance. It prevents dirt entry and helps keep surrounding parts secure. What it does:

• Covers exposed screws and openings to improve cosmetics
• Protects underlying components from dust and debris
• Helps keep trim and panels aligned when installed
• Commonly replaced when cracked, broken, or missing

• One cover cap

• Disconnect power (and water if applicable) before servicing the appliance
• Typically installs by snapping into position; lightweight trim may require a small flat screwdriver to remove old piece
• Inspect surrounding clips/tabs for damage and replace if worn to ensure a secure fit
• Handle plastic parts gently to avoid cracking during install

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.