Parts for Kenmore 790.80353310 (79080353310, 790 80353310): Oven,Cabinet Parts

The Wave Guide Cover is an OEM part for Frigidaire microwaves. The cover prevents food particles and moisture from entering the wave guide, helping to maintain the efficiency and safety of the microwave.

Causes of a bad wave guide cover can include exposure to high heat, splatters from food and liquids, or regular wear and tear. 

Symptoms of a bad wave guide cover include:

• Sparks or arcing inside the microwave
• Uneven cooking or heating
• Visible burns, cracks, or discoloration on the cover
• Noise or rattling sounds during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This support mounting bracket secures and stabilizes a component inside the appliance, restoring proper alignment and reducing noise from loose parts. It's a direct-fit replacement designed to restore reliable function quickly. What it does:

• Secures a panel or internal component to the cabinet to prevent movement and sagging
• Keeps parts aligned to ensure smooth operation and reduce rubbing or vibration noises
• Helps stop intermittent rattling or shifting that can occur during cycles
• Provides a stable mounting point for screws or fasteners used in the assembly

• Disconnect power (or unplug) before starting any repair to avoid shock or injury
• Basic hand tools are typically all that's needed; do not force or bend the bracket during installation
• Tighten screws snugly but avoid over-torquing to prevent stripping or cracking adjacent components.

This support is a replacement cabinet mounting support that helps secure and stabilize internal appliance components for proper alignment and operation. Installing a new support restores firm attachment where the old piece is cracked or worn. What it does:

• Provides a secure mounting point to hold internal components or panels in place
• Prevents movement that can cause rattling, misalignment, or improper door/panel fit
• Restores structural support if the original part is cracked, broken, or missing
• Helps maintain correct spacing for connected parts and wiring

• One replacement support

• Disconnect power (and water supply if applicable) before beginning service
• Remove access panels or shelves as needed to reach the damaged support
• Retain original fasteners unless replacement hardware is specified; do not overtighten screws

This base plate is the lower cabinet support that restores structural stability and covers the appliance underside for a finished appearance. It helps protect internal components and maintain proper airflow under the unit. What it does:

• Provides structural support for the appliance's lower cabinet and toe area
• Secures and protects internal components located under the unit from debris and accidental contact
• Helps maintain intended airflow and clearance beneath the appliance
• Restores cosmetic appearance where the original base plate is damaged or missing

• One base plate

• Disconnect power to the appliance before starting any work
• Remove the toe grille or access panel to reach base plate mounting points
• Use basic hand tools to remove/replace screws; align plate before tightening

This electronic control assembly replaces the oven's main user interface and control board so the range can register commands and manage bake/broil cycles reliably. It restores the oven's ability to accept inputs and run timed cooking functions. What it does:

• Replaces the oven control board that interprets keypad/selector inputs and runs bake, broil and timed operations
• Restores display and control response when touchpad or front controls are unresponsive
• Can stop intermittent or complete loss of control due to a failed electronic board
• Helps correct symptoms like blank or scrambled display, failure to start heating cycles, or unresponsive buttons

• One control assembly (main electronic control board and pre-attached user interface as shown)

• Disconnect power at the breaker before starting; this part is behind live wiring
• Handle the board by its edges and avoid touching circuitry; wear an anti-static wrist strap if available
• Note or label wire connections and take photos before removal to ensure correct reassembly
• Some models require removing the back panel or console to access the control; follow your model's service instructions

This complete door assembly replaces a damaged or worn refrigerator door to restore proper sealing, appearance and reliable opening/closing. It fits the original mounting points for a direct replacement and helps stop cold loss. What it does:

• Replaces a dented, cracked or warped door to restore proper seal and insulation
• Stops air leaks that can cause temperature fluctuation, frost buildup or higher energy use
• Restores smooth hinge operation and consistent door alignment
• Improves appliance appearance by replacing a damaged exterior door

• Disconnect power and empty the door and adjacent shelves before beginning.
• Door assemblies can be heavy and awkward—have a helper for removal/installation.
• Follow factory alignment and hinge torque procedures; loose hinges can cause gaps or binding.

This magnetron generates the microwave energy used to heat food in countertop and over-the-range microwaves. Replace a failed magnetron when the oven powers on but does not heat or shows arcing or loud humming. What it does:

• Converts high-voltage power into microwave radiation that heats food.
• Common symptom: microwave runs but does not heat.
• Other symptoms: unusually loud humming, arcing or sparking inside the cavity, or a burning/ozone-like smell.
• Not a user-serviceable electrical component — faults often require component-level replacement.

• Disconnect power before servicing; unplug the appliance and verify power is removed.
• Discharge the high-voltage capacitor before touching high-voltage components to avoid serious shock.
• Handle carefully; avoid touching the magnetron antenna or ceramic surfaces.

The Capacitor is an OEM part for Frigidaire microwaves. It is responsible for storing and releasing electrical energy to power the microwave's magnetron, which generates the high-frequency waves needed for cooking.

A bad capacitor can be caused by electrical issues, component failure, or physical damage. Signs of a faulty capacitor include microwave not heating properly, sparking or arcing inside the microwave, or unusual noises during operation.

Symptoms of a bad capacitor include:

• Microwave not heating  
• Sparking or arcing 
• Buzzing or humming sounds

Replace your malfunctioning or damaged capacitor with this genuine OEM Frigidaire part to restore your microwave. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Replacement electrical diode for Frigidaire refrigerators that directs current flow to protect control circuitry and help defrost and compressor systems operate correctly. Installs quickly to restore proper electrical function when a diode fails. What it does:

• Allows electrical current to flow in only one direction to protect sensitive control and compressor circuits.
• Prevents backfeed that can damage control boards or other components.
• Common symptom: intermittent or no compressor/defrost operation.
• Other symptoms: blown fuses, tripped breakers, or erratic electrical behavior in the appliance.

• Disconnect power to the appliance before beginning any service.
• Handle electrical connections carefully; use insulated tools and avoid touching live terminals.
• Confirm connector fit and orientation before finalizing installation.

This mesh grease filter captures grease and food particles from exhaust air in your over-the-range ventilation system, helping protect the blower and keep the area around your cooktop cleaner. Replace a bent or saturated filter to restore proper airflow. What it does:

• Traps grease and particulates from cooking exhaust
• Helps maintain airflow through the venting system
• Common signs of replacement: torn/warped mesh, broken tabs, heavy grease saturation, or the filter falling out

• 1 mesh grease filter

• Disconnect power before servicing and let surfaces cool
• Wear gloves; filter edges can be sharp
• Access the filter from the bottom, release the latch or tabs, slide out the old filter, and seat the new one securely in the same orientation
• Do not operate the appliance without the grease filter installed

This Fuse is an OEM part for Frigidaire microwaves. It's a critical safety component designed to protect the microwave from electrical overload by breaking the circuit if the current is too high. This fuse is specifically tailored to fit and function properly with Frigidaire microwave models, ensuring safety and reliability.

Fuses in microwaves can blow due to power surges, electrical faults within the appliance, or overheating caused by restricted airflow or malfunctioning components. A blown fuse prevents the microwave from operating as a safeguard against potential electrical damage or fire hazards.

Symptoms of a blown fuse include:

• The microwave suddenly stops working and doesn't turn on.
• No response from the microwave's control panel or display.
• The microwave is completely unresponsive, even when the door is opened or closed.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This replacement lamp restores clear, reliable lighting so you can see food and monitor cooking at a glance. Install a new bulb when the original is burned out, flickers, or the glass capsule is darkened or damaged.

• Provides illumination for the appliance interior or work area, depending on model
• Typical symptoms: no light when the door opens or light button is pressed
• Flicker or work intermittently before failing completely
• Visible damage or dark, cloudy glass indicates the bulb has failed

• Disconnect power to the appliance before servicing and allow the lamp area to cool
• Access varies by model; remove the lens/cover or service panel per your unit's documentation
• Handle the bulb by the base; if halogen capsule style, avoid touching the glass
• Replace only with the lamp type and wattage specified for your model

This microwave lampholder is the light socket that holds the bulb and connects it to the unit's wiring, restoring dependable illumination when the original socket is heat-damaged, loose, or no longer powering the lamp. What it does:

• Holds the bulb securely and provides electrical contact for the microwave's light circuit
• Common fix for no light, flickering/intermittent light, or a bulb that won't stay seated
• Replace if the socket is cracked, charred, or shows heat damage
• Restores visibility for checking food or lighting the cooktop, as designed for your model

• 1 lampholder

• Disconnect power at the breaker or unplug before servicing; microwaves contain high-voltage components even when unplugged
• Access varies by model; remove covers/panels per your service manual
• Note wire positions or take photos before transferring connections; ensure snug terminals
• Use only the bulb type and wattage specified by the manufacturer for your model

This temperature sensor monitors internal fridge/freezer temperature so the control board can regulate cooling and defrost cycles for more consistent temperatures and food safety. What it does

• Measures compartment temperature and sends readings to the control board.
• Helps the refrigerator maintain set temperatures by enabling accurate cooling cycles.
• Supports proper defrost control when used in defrost/evaporator applications.
• A failing sensor can produce temperature fluctuation, poor cooling, or longer run times.

• One temperature sensor

• Disconnect power before servicing to avoid shock or compressor damage.
• Handle the sensor and connector gently; avoid pulling on wires.
• Verify location and routing match the original; secure sensor to prevent contact with moving parts.

This thermostat is a temperature-sensitive switch used in select appliances to regulate heat or provide over-temperature protection. Replacing a failed thermostat restores consistent temperature control and helps protect internal components from heat-related damage.

• Monitors temperature at its mounting point and opens/closes the circuit at a factory-set threshold
• Regulates heating cycles or functions as a high-limit safety cutoff (application-dependent)
• Failure open can cause no heat or premature shutdown
• Failure stuck closed can lead to overheating, erratic temperatures, or extended run times

• Disconnect power and allow the appliance to cool before servicing
• Note wire locations; transfer one lead at a time to the new thermostat
• Mount flush and secure to the mating surface/bracket for accurate sensing; ensure firm terminal connections
• After installation, run and observe an initial cycle to confirm normal operation

The Thermostat is an OEM part for Frigidaire microwaves. This thermostat monitors and regulates the temperature within the microwave, ensuring that it operates within safe limits and prevents overheating.

Causes of a bad thermostat can include wear and tear from regular use, electrical issues, or damage from power surges or overheating events, which can impair its ability to regulate temperature.

Symptoms of a bad Thermostat include:

• The microwave not heating properly
• The microwave shutting off unexpectedly
• The unit not turning on at all
• Overheating or burning smells during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Thermal Cut Off is an OEM part for Frigidaire microwaves. It is located inside the microwave cavity or near the magnetron tube. It is designed to monitor the temperature and interrupt the electrical current if it exceeds a safe limit. This prevents the microwave from overheating and potentially causing damage or hazards.

Causes of a faulty or damaged thermal cut off can include regular wear and tear, electrical malfunctions, or overheating due to excessive use or blocked airflow. These factors can result in issues such as the microwave not heating food properly, frequent shutdowns during operation, or complete failure to function.

Symptoms of a bad thermal cut off may include:

• The microwave not generating heat
• The microwave turning off abruptly during operation
• The microwave not starting or experiencing intermittent operation

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

This capacitor helps the refrigerator compressor start and run smoothly, restoring reliable motor operation and improving cooling performance when the original capacitor fails. It's a direct-replacement electrical component used on compatible Frigidaire appliances. What it does:

• Supplies the brief electrical boost the compressor motor needs to start
• Supports continuous motor operation to maintain consistent cooling
• Commonly linked to symptoms such as the compressor struggling to start, loud humming, or reduced cooling
• Helps prevent hard starts that can lead to overheating or repeated cycle failures

• One capacitor

• Disconnect power to the appliance before service to avoid electric shock
• Capacitors can hold a charge—discharge safely before touching terminals
• Verify terminal connections match the original and secure all wiring after replacement

This evaporator fan assembly circulates cold air through the freezer and refrigerator compartments to help maintain even temperatures and proper cooling. Replaces a worn or failed fan to restore airflow. What it does:

• Spins to move cold air across the evaporator coil and into the appliance interior
• Commonly linked to symptoms like unusual noise, weak cooling, or no airflow in compartments
• Helps prevent frost build-up by maintaining steady airflow over the coil
• Works with the appliance's evaporator motor circuit and fan housing

• One evaporator fan assembly

• Disconnect power to the appliance before beginning any work
• Access may require removing interior panels or the evaporator cover; follow your model's service instructions
• Handle the fan blades and motor carefully to avoid damage; avoid contact with sharp sheet metal and edges
• Test the fan operation after reassembly and restore all panels and fasteners

The Latch Hook is an OEM replacement part for Frigidaire microwaves. It is an internal component that helps securely latch and lock the microwave door during operation. The latch hook works with the door handle mechanism to ensure the door is properly fastened to prevent leaks of microwave energy and for safety. 

Causes of a bad latch hook can include wear and tear over time, damage from repeated use of the door latch, or issues with the latch hook spring or connecting components. 

Symptoms of a bad latch hook include:

• The microwave door not closing or latching securely  
• Difficulty closing or popping open the door during a cycle
• Leaks of microwave energy from around the door seals
• Error codes related to door-latching problems

This OEM Frigidaire replacement part is also compatible with Electrolux, Westinghouse, and Kelvinator microwaves. 

This door release lever connects the push-button to the latch assembly inside the microwave. Replacing a worn lever restores smooth, reliable door opening so the button works on the first press.

• Transfers motion from the door-open button to the latch hooks to release the door
• Helps resolve a door that won't open when the button is pressed
• Addresses a button that feels loose, sticks, or lacks resistance
• Replaces a cracked or broken lever causing intermittent door operation

• Unplug the microwave and discharge the high-voltage capacitor before servicing
• Remove the grille and control panel to access the interlock/latch area
• Note spring and pivot orientation and transfer any reusable hardware
• Test door release action before completing reassembly

The Door Switch is an OEM part for Frigidaire microwaves. It plays a crucial role in the microwave's overall function by detecting when the door is open or closed. The door switch communicates this information to the control board, enabling it to safely operate the microwave's electronic components and magnetron when the door is shut.

Symptoms of a bad door switch include:

• The microwave failing to operate or function properly with the door closed  
• Inability to start or pause operation when the door is opened
• Error codes or failure messages appearing on the display related to door functionality

Causes of a bad door switch can be wear and tear over time, damage from repeated opening and closing of the microwave door, or impact from accidental mishandling. 

This OEM replacement is also compatible with Electrolux, Admiral, Crosley, White-Westinghouse, and Kenmore models.
 

The Door Switch is an OEM part for Frigidaire microwaves, designed to ensure the appliance operates safely by signaling when the door is securely closed. This switch is critical for preventing the microwave from running if the door is open, a key safety feature that protects users from exposure to microwave radiation.

Causes of a bad Door Switch can include mechanical failure due to normal wear and tear from repeated opening and closing of the microwave door. 

Symptoms of a bad Door Switch include:

• The microwave not starting or heating when the door is closed.
• The appliance continuing to operate when the door is opened.
• Intermittent operation or sudden stopping during use.
• Displaying error messages related to the door or switches.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This water filter cartridge replaces the refrigerator's inline/slot-style filter to help reduce taste and odor from your drinking and ice water. It restores filtered water flow and helps keep dispensed water clear and fresh. What it does:

• Removes common impurities that affect water taste and odor
• Helps reduce particulates and sediment in dispensed water
• Restores proper filtered water flow when a clogged/expired filter causes slow flow
• Supports clearer, better-tasting ice and drinking water

• One water filter cartridge

• Turn off the water supply and dispense any remaining water before removing the old filter
• Follow the refrigerator manufacturer's push/pull or twist-release procedure for removal and installation
• After installing, flush several quarts of water through the dispenser to clear air and initial carbon fines
• Replace per the refrigerator manufacturer's recommended schedule or when filter performance declines

This mounting kit secures appliance components in place to restore safe, stable installation and alignment. It provides the brackets and fasteners needed to mount the associated assembly and prevent shifting or rattling during use. What it does:

• Provides the brackets and hardware that hold an appliance assembly securely in position
• Restores proper alignment to reduce vibration, noise, and movement
• Replaces worn or missing mounting hardware that can cause loose panels or components
• Helps ensure connected parts stay fixed for safe, reliable operation

• Turn off and disconnect power to the appliance before attempting any repairs
• Keep all fasteners tight and verify alignment after installation
• If additional parts are missing or damaged, stop and source the correct replacement components before finishing

This Filter is an OEM part for Frigidaire microwaves. It captures grease and other particles from the air during cooking, helping to prevent buildup inside the microwave and in the kitchen's ventilation system.

Over time, filters can become clogged with grease and debris, leading to reduced effectiveness and potential issues with the microwave's performance. Common causes for a filter's deterioration include regular use, especially with high-grease foods, and lack of regular cleaning or maintenance.

Symptoms of a bad filter include:

• Noticeable grease buildup on the filter.
• Reduced effectiveness in venting smoke or odors.
• The microwave becomes louder during operation.
• Decreased efficiency in cooking, particularly with foods that produce a lot of steam or smoke.
• An unpleasant odor emanating from the microwave during or after use.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This Turntable Motor is an OEM part for Frigidaire microwaves. Responsible for the rotation of the microwave's turntable, which ensures even cooking and heating of food. This motor ensures that the turntable operates smoothly and reliably, maintaining the efficiency of your microwave.

A malfunctioning motor can lead to uneven heating or cooking of food, as the turntable is integral to the microwave's ability to distribute heat uniformly.

Symptoms of a faulty turntable motor include:

• The turntable does not rotate when the microwave is in use.
• Intermittent or erratic movement of the turntable.
• Unusual noises coming from the turntable area during operation.
• Food is unevenly cooked or heated, indicating inconsistent turntable motion.
• The microwave operates normally except for the turntable function.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

The Glass turntable Tray Support is an OEM replacement part for Frigidaire microwaves. It provides stable placement for the microwave's rotating glass turntable. 

Causes of a bad turntable support can include wear from prolonged operation, stress from overfilling or shifting of heavy loads, or damage if the turntable is accidentally dropped or impacted.

Symptoms of a bad turntable support include:

• The turntable not spinning properly or getting stuck during operation
• Vibration or noise coming from the turntable mechanism 
• Difficulty removing or fitting the turntable securely  
• Food not cooking evenly due to an unstable or off-center turntable

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator and Kenmore models.

The Glass Turntable Plate is an OEM part for Frigidaire microwaves. As the surface food rests upon during cooking, it features heat-resistant tempered glass construction suitable for high-power microwave usage. 

Causes of damage can include cracking or splitting from thermal shock of sudden temperature changes during repeated heating and cooling cycles. Improper cleaning methods using harsh chemicals may also degrade protective coatings.

Symptoms of a faulty glass plate involve: 

• Cracks or chips exposing sharp edges presenting a hazard
• Denting or warping preventing level rotation inside the cavity
• Staining or clouding compromising visibility of cooking foods

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models.

This replacement shaft transmits rotation between components within the targeted assembly. It restores proper alignment and smooth motion when the original shaft is worn, bent, or stripped, helping the appliance operate reliably again.

• Transfers rotational force between mating components in the mechanism
• Maintains alignment and support for rotating parts
• Ensures secure engagement with the hub/gear to prevent slipping
• Worn or bent shafts can cause wobbling, grinding noises, slipping, or intermittent operation

• Disconnect power (and water supply if applicable) before servicing
• Access the assembly and note the shaft's orientation and any spacers, clips, or washers
• Transfer any reusable hardware from the old shaft and seat the new shaft fully
• Verify smooth rotation by hand before reassembly and testing

This fan blade mounts to the refrigerator fan motor to move air through the appliance for proper cooling and temperature circulation. Replaces a worn or damaged blade to restore airflow and improve cooling efficiency. What it does:

• Spins on the fan motor to circulate air across the evaporator or condenser coils
• Restores proper airflow when a cracked or broken blade causes reduced cooling
• Helps stop vibration or rattling caused by bent or missing blades
• Can reduce motor strain from an imbalanced or damaged blade

• Disconnect power to the appliance before starting any repair
• Remove access panels and fan shroud to reach the blade; keep track of mounting hardware
• Replace carefully to avoid bending the blade; ensure correct orientation on the motor shaft

This replacement motor restores movement to the appliance's fan or drive assembly so air or components circulate properly for normal operation. It fits original mounting locations and connects to existing wiring for a direct swap. What it does

• Drives the fan or rotating assembly to circulate air or operate a driven component
• Restores normal airflow or mechanical rotation when the original motor fails
• Commonly used when you have loud motor noise, no motor movement, or intermittent operation
• Helps resolve related issues like poor cooling or reduced airflow caused by a stalled motor

• One replacement motor as shown

• Turn power to the appliance off at the breaker or unplug before servicing
• Verify wiring colors and connector fit before disconnecting; replace one wire at a time if needed
• Handle carefully to avoid damaging the shaft or mounting tabs; follow OEM instructions for mounting torque

The Damper is an OEM part for Frigidaire microwaves. This part regulates airflow within the microwave, ensuring that steam and odors are properly vented out during cooking.

Causes of a bad damper can include wear and tear over time, buildup of grease and debris, or damage from high temperatures.  

Symptoms of a bad Damper include:

• Poor ventilation during cooking, leading to lingering odors and steam
• The microwave overheating or not ventilating properly
• Unusual noises coming from the damper area
• The damper not opening or closing as it should

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This front vent grille restores the finished look and airflow path at the appliance front. It replaces damaged or missing grille trim so vents stay covered and the front of the appliance looks complete. What it does

• Covers and protects the appliance front vent opening while directing airflow
• Helps keep debris from entering the vent area and interfering with airflow
• Restores a secure, finished appearance when original grille is cracked, broken or missing
• Reduces rattling or loose trim caused by damaged grille mounting

• One front vent grille

• Disconnect power to the appliance before beginning any work
• Handle the part carefully; edges may be sharp and clips can be fragile
• Typically installs with snap clips or a few screws—use the same fasteners removed from the original
• Secure fit before restoring power

The Vent Grill is an OEM part for Frigidaire microwaves. It is a component located on the top or bottom of microwaves that allows heat, smoke, and odors to safely vent outside. Effective ventilation is important for removing steam and fumes produced during the microwave cooking process.

Causes of a bad Vent Grill can include damage or blockages to the vent holes over time due to food splatters/particles or debris buildup, as well as cracks or breaks in the plastic components. 

Symptoms of a bad Vent Grill are:

• Steam or smoke escaping from areas besides the dedicated vent 
• Reduced airflow and inability to fully vent heat/fumes
• Fogging or condensation inside the microwave cavity
• Unpleasant cooking odors lingering around the appliance

This OEM Frigidaire replacement part is compatible with microwaves from Electrolux, Gibson, Kelvinator, select Kenmore and Westinghouse models.
 

The Vent Damper is an OEM part for Frigidaire microwaves. It is designed to control the flow of air through the microwave’s ventilation system, ensuring proper ventilation during operation. This component helps to prevent the backflow of air, keeping the microwave's interior and its surroundings free from unwanted odors and heat.

Causes of a bad vent damper can include wear and tear over time, accumulation of grease or debris, or damage from external impact. 

Symptoms of a bad vent damper include:

• Poor ventilation
• Unusual odors lingering around the microwave
• Excessive heat buildup
• Increased noise during operation

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This fan blade circulates cold air across the evaporator to help maintain even refrigerator/freezer temperatures and efficient cooling. Replacing a damaged or warped blade restores proper airflow and reduces unusual noise. What it does:

• Moves air across the evaporator coil so the appliance can cool evenly
• Helps prevent hot spots and frost buildup caused by poor airflow
• Can cause loud noise, reduced cooling, or a warm compartment when worn or broken
• Works with the evaporator/fan motor assembly to keep temperatures stable

• One fan blade

• Disconnect power before accessing evaporator compartment or fan assembly
• Handle blade carefully to avoid bending the fins; a bent blade causes vibration and noise
• May require removing evaporator cover or fan shroud; keep track of any screws or clips
• If motor is noisy or blade clearance is tight, inspect/replace motor or mounting hardware as needed

This cabinet is the main outer housing that supports and encloses the refrigerator's internal components, restoring the unit's structure and appearance. It provides a secure frame for doors, panels, and internal assemblies. What it does:

• Replaces a damaged or dented outer refrigerator housing to restore fit and finish
• Supports door hinges, trim, and internal panels for proper alignment
• Helps protect internal insulation, wiring, and cooling components from damage
• Addresses symptoms like visible exterior damage, misaligned doors, or rattling from a loose enclosure

• One cabinet outer housing as shown

• Disconnect power and empty unit before beginning work to avoid injury or damage
• Use proper lifting assistance; cabinet can be heavy and awkward to handle
• Retain all mounting hardware unless a replacement is explicitly included

This mounting nut kit secures a threaded connection or component inside your appliance, keeping it tight and stable during operation. Replacing a worn or stripped nut restores a solid hold and helps prevent leaks, rattling, and poor performance. What it does:

• Fastens a component or fitting to its mating surface, maintaining proper alignment
• Restores grip when original threads are stripped, cracked, or worn
• Helps prevent vibration-related loosening during cycles
• Can resolve symptoms such as a loose/wobbly assembly, rattling noises, seepage at the joint, or visible thread damage

• One mounting nut kit

• Disconnect power; shut off water supply if the joint carries water
• Support the mating component while installing to avoid strain on plastic parts
• Start threads by hand to prevent cross-threading; tighten only until snug—do not overtighten
• Inspect any related gasket/O-ring and replace if worn or damaged

The Mounting Bracket is an OEM part for Frigidaire microwaves. This part securely attaches the microwave to the wall or cabinetry. This bracket is designed to ensure that your microwave is mounted safely and remains stable during operation, preventing any potential movement that could lead to damage or operational issues. 

Causes of a bad Mounting Bracket can include physical damage from improper installation or accidents, wear and tear over time that weakens the bracket's integrity, and corrosion due to exposure to moisture or kitchen vapors, which can compromise its strength and stability.

Symptoms of a bad Mounting Bracket include:

• The microwave tilting or sagging
• Unusual vibrations or noise during operation, indicating that the microwave is not securely fastened
• Visible damage or rust on the bracket itself, which could weaken its support

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This replacement pin is a small metal mounting shaft used to secure moving or stationary appliance components, restoring proper alignment and function. It's a simple, direct-fit replacement when a worn or broken pin prevents normal operation. What it does:

• Acts as a pivot or fastener to hold panels, levers, or hinges in place
• Restores correct alignment and prevents wobble or misrouting of parts
• Commonly replaced when pin is bent, worn, or sheared
• Helps re-establish smooth movement of the connected component

• Basic hand tools may be required; access panels or trim may need removal
• Inspect mating parts (bushings, clips, brackets) and replace if worn
• Disconnect power before servicing appliances with electrical components

This screw kit provides the replacement fasteners needed to secure panels and components on compatible Frigidaire appliances, restoring proper fit and reducing vibration or loose parts. Use it to replace missing, damaged, or stripped screws. What it does:

• Replaces stripped, corroded, or missing screws used on appliance panels, brackets, and trim
• Restores secure mounting to stop rattling, gaps, or loose components
• Helps maintain correct alignment of doors, panels, and internal parts after repair
• Provides a range of common screw types to match original fasteners

• Screw kit (assortment of screws as supplied by the manufacturer)

• Turn off power and disconnect the appliance before beginning any repair
• Use the correct screwdriver or bit to avoid further screw damage
• Keep small parts away from children and dispose of damaged fasteners properly