Bosch Washer WAW285H1UC Parts

Dissolves odor-causing residue and mildew buildup in washing machine tubs. Use every 30 washes to maintain freshness. Verify fit with your model.

If your washer won't drain or water pools in the drum, this drain pump forces water out through the hose. Moderate DIY repair, about 1 hour to replace.

This is an electromagnetic water inlet valve that controls the flow of water into your washing machine, typically directing it to the detergent dispenser. It opens and closes electronically based on signals from the control board during the wash cycle. Replace this valve if the washer is not filling with water, fills slowly, leaks from the valve area, or if the dispenser is not receiving water properly.

The Fastening Ring is an OEM replacement part for Bosch washers. This part is responsible for securely fastening the boot seal to the washer's drum, ensuring a watertight seal and preventing leaks during the washing cycle.

A bad fastening ring can occur due to wear and tear, damage from foreign objects, or improper installation. Signs of a faulty fastening ring include water leaks around the washer's door or visible damage to the boot seal.

Symptoms of a bad fastening ring include:

• Water leaks around the washer's door
• Excessive noise or vibration 
• Visible damage or deformation of the ring

Replace your worn-out or damaged fastening ring with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Shock absorber that cushions vibrations during spin cycles. Mounts between the drum and base. Replace if cracked, leaking, or worn to restore stability.

Replaces worn or broken washer drive belt that connects motor to drum. If drum won't spin during wash or spin cycles, this belt restores operation.

The Washer Filter-Fluff is an OEM replacement part for Bosch washing machines. It is a critical component responsible for capturing lint, debris, and other particles that may accumulate during the wash cycle, preventing them from clogging the drainage system or causing damage to the machine.

Over time, the accumulation of lint and debris can impede the filter's effectiveness, leading to drainage issues and reduced washing performance. Physical damage to the filter can also compromise its ability to capture lint properly.

Symptoms of a bad washer filter-fluff include:

• Slow or incomplete draining of the washing machine
• Excessive lint on clothes after washing
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore washing machine models. 

Adjustable leveling foot that installs on the bottom of your washer to provide stable support. Replace when cracked, worn, or missing to restore balance.

This is a drain hose that connects the washer's sump to the drain pump or external drain line, allowing used wash water to exit the machine. It is a flexible hose designed to handle the flow of water during the drain cycle. Replace this hose if you notice water leaking beneath the washer, slow draining, or visible cracks and deterioration in the hose material.

Flexible drain hose that routes water out of your washer during drain cycles. Replace if cracked, leaking, kinked, or disconnected from the pump.

Secures and stabilizes washer components to maintain proper alignment and sealing. Replace if worn, cracked, or causing leaks. Confirm fit with your model.

Washer won't start, making noise, or not spinning? The inverter control board regulates motor speed and power. Moderate difficulty repair for DIYers.

If your washer isn't filling with water or you see leaks at the connection point, the water inlet hose may need replacement. Direct fit for select models.

This replacement circulation pump motor restores water circulation in compatible dishwashers so the spray arms run properly and dishes get clean. Designed to fit in the pump assembly and replace a worn or failed motor. What it does:

• Drives the dishwasher wash/circulation pump so water is moved through the spray arms
• Helps restore normal spray pressure and cleaning performance when the motor has failed
• Can address symptoms such as no water circulation, weak spray, unusual motor noise, or pump not running
• Works as the mechanical drive inside the pump housing

• One replacement circulation pump motor

• Disconnect power and water supply before starting any repair
• Access requires removing the dishwasher access panels and pump housing; follow your service manual for disassembly
• Inspect related seals and impellers when replacing the motor; replace any damaged parts to prevent leaks

Replacement mounting bracket holder that secures internal components in place. Install when original is cracked, broken, or missing to restore proper alignment.

2 included - Front load