Kenmore Refrigerator 106.7655260 (1067655260, 106 7655260) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$17.76
- Compare At:
-
$20.96
- You Save:
-
$3.20
Genuine Whirlpool part
By: Whirlpool
Part Number: 4317943
The Icemaker Kit is an OEM replacement part for Whirlpool refrigerators. It is a comprehensive kit that includes all the necessary components to replace or install a new icemaker in your refrigerator.
Causes of needing a new icemaker kit can include the existing icemaker malfunctioning, producing insufficient or irregular ice, or being damaged due to wear and tear.
Symptoms indicating it's time to replace the icemaker include:
- No ice production or irregular ice cube formation
- Water leaks or excessive condensation around the icemaker area
- Strange noises or grinding sounds during operation
- Error codes or warning lights related to the icemaker
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. Note: This kit no longer comes with the "shut-off" arms. Order by model if needed.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker dispenses too much ice
-
Ice maker won't dispense ice
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Broken icemaker Phillip L. • Raymond , MS • March 30, 2024
Replace assembly
Read more
More
$117.95
- Compare At:
-
$141.54
- You Save:
-
$23.59
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822278
The Whirlpool Defrost Timer is an OEM replacement part for Whirlpool refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils.
Causes of a bad defrost timer can include mechanical wear over time, electrical failures, or internal component damage. Prolonged usage and voltage spikes can also affect the timer's functionality.
Symptoms of a bad Defrost Timer include:
- Excessive frost buildup in the freezer compartment
- The refrigerator or freezer not maintaining the set temperatures
- Unusual noises coming from the appliance
- The appliance running continuously without cycling off
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too warm
-
Fridge runs too long
-
Fridge too cold
-
Frost buildup
See more...
Do-It-Yourself Stories from Customers like You
Defrost not working on upright 20 year old freezer W D D. • Spring , TX • September 19, 2014
A word of thanks to AppliancePartsPros - they delivered in one day. Ordered at 4PM CDT and received the part by noon the next day. Also, Alicia in the help department was able to locate an electrical diagram for my old freezer. This was essential for proper setup and her persistence in tracking down the diagram was top notch. Now on to my problem. One day I opened the freezer and found frost and thawing food. I attributed this to the door hitting an item in the freezer and not completely...
Read more
More
$33.95
- Compare At:
-
$40.06
- You Save:
-
$6.11
Genuine Whirlpool part
By: Whirlpool
Part Number: W11384469
The Door Switch is an OEM part for Whirlpool refrigerators. This switch plays a crucial role in monitoring the status of the refrigerator door. It detects when the door is open and closed and signals the refrigerator to suspend or resume cooling operations accordingly.
Causes of a bad door switch can include general wear and tear over time, exposure to moisture, or impact damage. Please check for proper connection and that the wires are intact before replacing the switch.
Symptoms of a bad door switch include:
- The refrigerator fails to resume cooling after closing the door
- The inside light fails to turn on when the door is opened
- Abnormal energy usage due to improper door monitoring
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Fridge interior light kept going out Phil D. • Phoenix , AZ • June 16, 2014
Replaced door switch - it took less than 5 minutes - works perfectly
Read more
More
$29.30
- Compare At:
-
$35.16
- You Save:
-
$5.86
Genuine Whirlpool part
By: Whirlpool
Part Number: 482731
The Evaporator Fan Motor Kit is an OEM replacement part for Whirlpool refrigerators. It includes the evaporator fan motor, which is responsible for circulating air over the evaporator coils, and any necessary mounting hardware or accessories.
Symptoms of a need to replace the evaporator fan motor kit include:
- Inadequate cooling or uneven temperature distribution within the refrigerator
- Loud noises or excessive vibrations coming from the evaporator area
- Complete failure of the refrigerator to cool or maintain temperature
Causes of a faulty evaporator fan motor can include general wear and tear, electrical malfunctions, bearing failures, or physical damage from impact or foreign objects.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
This part fixes the following symptoms
-
Noisy
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Not cooling in refrigerator compartment only in freezer Robert R. • Breaux Bridge , LA • February 15, 2015
Replace evaporator fan motor located in freezer compartment
Read more
More
$65.95
- Compare At:
-
$77.82
- You Save:
-
$11.87
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.
Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.
Symptoms indicating the need for Appliance Touchup Paint include:
- Visible scratches or chips on the appliance surface
- Areas of exposed metal prone to rust
- Blemishes that affect the overall aesthetic of the appliance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$12.55
- Compare At:
-
$15.06
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196157
The Icemaker Fill Tube Fitting is an OEM part for Whirlpool refrigerators. This part connects the water supply line to the icemaker, ensuring a seamless and leak-free delivery of water into the icemaker mold.
Causes of a bad Icemaker Fill Tube Fitting can include wear and tear over time, mineral buildup from hard water, which can block the water flow or damage the fitting, and improper installation that may lead to leaks or restricted water flow.
Symptoms of a bad Icemaker Fill Tube Fitting include:
- Water leakage at the connection points, leading to potential water damage or ice buildup in the freezer
- Insufficient ice production if the fitting is partially blocked or not properly connected, restricting water flow to the icemaker
- Unusual noise during the icemaker fill cycle, indicating a potential issue with the fitting
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015
I watched your how-to video. It explained the repair PERFECTLY.
It was an easy repair and the video was very detailed. It took the guesswork out of the repair.
I was done in 5 minutes.
thanks for taking the time to post videos for your parts. I'll shop here again.
Best Regards,
Chad M
Read more
More
$9.60
- Compare At:
-
$11.52
- You Save:
-
$1.92
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP279368
The Adhesive is an OEM part for Whirlpool appliances, designed for securing and sealing various components within the appliances. This adhesive is ideal for use in situations where a durable and heat-resistant bond is necessary.Size: 2 oz. tube. This silicone rubber adhesive can be used on door gaskets, felt seals, and much more.
Over time, seals and insulation can become loose or detached due to wear, heat, or mechanical action, potentially compromising the appliance's functionality, efficiency, or safety.
The need for this adhesive may become apparent through symptoms such as:
- Loose seals or gaskets that result in heat loss, inefficiency, or the escape of moisture.
- Detached insulation leading to increased noise, heat transfer, or loss of energy efficiency.
- Components that have become unattached, affecting the appliance's performance or structural integrity.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Seal on dryer worn Randolph H. • Selfridge , ND • February 10, 2020
Seal and adhesive.
Read more
More
$54.26
- Compare At:
-
$64.57
- You Save:
-
$10.31
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
The Light Socket Kit is an OEM part for Whirlpool refrigerators. This kit includes the light socket and necessary components to ensure proper installation and functionality. It is designed to hold the refrigerator light bulb securely and provide reliable electrical connections to illuminate the interior of the refrigerator.
Common causes of failure include wear and tear, corrosion from moisture, or damage from handling or bulb replacement.
Symptoms of a bad Light Socket Kit include:
- Refrigerator light not turning on
- Flickering or intermittent lighting
- Visible damage or corrosion on the socket
- Burned or melted areas around the socket
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681414
Specs: 10-16 x 1/2 inch.
Do-It-Yourself Stories from Customers like You
Dryer drum was beginning to stall occasionally Dana J E. • San Marcos , CA • March 17, 2015
After shopping for a new Whirlpool Thin Twin Stack, Found appliance parts pros online and decided to take it apart to see if repair was a possibility. APPro's online instructions were easy to follow, in a couple hours it was apart, and I placed the order. Reg ground took a week from NY, so the laundry piled up that week. The parts arrived on Monday morrning, by afternoon the machine was running like new! The cause was the belt tensioner pulley had frozen. Replaced it, drum wheels,snap...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212648
The Hinge-Sleeve Hole Plug is an OEM part for Whirlpool refrigerators. It is designed to cover the hinge sleeve holes on the refrigerator door, providing a finished look and protecting the internal components from dust and debris.
Common causes of a bad hinge-sleeve hole plug include physical damage during routine maintenance or accidental impacts. A missing or damaged plug can lead to exposure of internal hinge components, potentially causing further damage over time.
Symptoms of a bad hinge-sleeve hole plug include:
- Visible gaps or holes in the refrigerator door hinge area
- Accumulation of dust or debris in the hinge mechanism
- Loose or unstable refrigerator door hinges
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 1129313
By Whirlpool. For porcelain liner Whirlpool, Kitchen Aid, Roper, Estate and Kenmore (with model prefix 106) refrigerator models with 30, 33 and 36 inch wide cabinets. Incorporates round plug. Kit includes wiring harness, fill tubes, water valve, ice bin, hardware and instructions.
Do-It-Yourself Stories from Customers like You
Needed a complete replacement Kimberly L. • East Alton , IL • April 25, 2014
My husband watched the video you had on how to install and uninstall an icemaker and it was very detailed and informative! When I called in I had no idea what all I needed, but the phone rep made sure I got all the parts needed for the job!!!
Read more
More
$86.58
- Compare At:
-
$111.74
- You Save:
-
$25.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WP819470
This cold control thermostat regulates your refrigerator's temperature by cycling cooling on and off based on air temperature at the sensing bulb. Replacing a worn control restores accurate settings and consistent cooling performance. What it does:
- Monitors compartment temperature via a capillary sensing bulb
- Opens/closes electrical contacts to start and stop the compressor (and related cooling circuits)
- Helps maintain the temperature you set on the control dial
- Failure symptoms include: unit too warm or too cold, runs continuously, won't start until the knob is moved/tapped, or erratic temperature swings
What's included:
Install notes:
- Disconnect power before servicing; wear cut-resistant gloves
- Note wire positions or take a photo; transfer the dial/shaft and any mounting hardware from the old control if reused
- Route the capillary bulb exactly as original; do not kink, pinch, or cut it; secure with existing clips
- After install, set to a mid setting and allow up to 24 hours for temperatures to stabilize
Do-It-Yourself Stories from Customers like You
My ice in the freezer was water and the food in my fridge was at room temperature Peter B. • Elburn , IL • August 15, 2016
I determined it was the thermostat, found the model number and Appliance Pros had one they said would work. So, I ordered one and got it in 2 days. Opened the package, read the instructions and 10 minutes later my new food was going to be cool and my water would be ice. All it took was remove housing, unplug old part, plug in new part and replace housing.
Read more
More
$77.95
- Compare At:
-
$92.76
- You Save:
-
$14.81