Kenmore Dryer 110.66512690 (11066512690, 110 66512690) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3392519
Stop dryer downtime in its tracks — install the Whirlpool WP3392519 OEM Thermal Fuse in minutes.
OEM Quality Fast 1–2 Day Shipping* Free Tech Help
Why choose this fuse?
- Guaranteed OEM: built by Whirlpool to Whirlpool specs — no risky aftermarket clones.
- Broad compatibility: works with Whirlpool, Kenmore, Maytag, KitchenAid, Roper & more.
- Quick delivery: over 94 % of APP orders arrive in 2 days or less.
Fixes these common dryer problems
| Problem |
How the fuse is involved |
| Dryer won’t start |
Blown fuse interrupts motor circuit |
| No heat / not enough heat |
Heater circuit disabled for safety |
| Cycle ends early |
Over-temp trip stops cycle |
| Control panel dead |
Power to controls interrupted |
4-step DIY installation (≈10 min)
- Unplug dryer and remove rear panel.
- Locate thermal fuse on blower housing.
- Transfer wires; secure new fuse with ¼-inch nut-driver.
- Clean the vent & lint path before testing to prevent repeat failure.
*Video tutorial below.
Ready to get heat back?
Click Add to Cart now & enjoy industry-leading 1–2 day delivery on
This part fixes the following symptoms
-
Won't start
-
Timer will not advance
-
No heat or not enough heat
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
No heat Dennis G. • Kearny , NJ • January 14, 2017
I did the recommended checks of parts as listed on the website. I would recommend as one other person did but I did not listen the first time and that is to check all the parts don't stop at the first part you find bad. As I had to make two orders paying shipping twice because I thought I found a bad part when testing the igniter but the thermal fuse was also bad and since in a different part of the machine I did not take the time to check it, bad mistake.
Also one tool mentioned in the video...
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 341241
Get your dryer spinning smoothly again - install the Whirlpool 341241 OEM Drum Belt in minutes.
Why this belt?
- Exact factory spec: 92 ¼-inch length × ¼-inch width, 4 ribs / 3 grooves - built to Whirlpool standards, not a generic copy.
- Broad compatibility: Fits most Whirlpool-made dryers - Kenmore 110-series, Roper, Estate, Maytag, KitchenAid, Admiral, Crosley, Amana & more.
- Quiet, durable rubber: Reinforced EPDM resists cracking and stretch for years of reliable tumbling.
Fixes these common dryer problems
| Problem |
How the belt solves it |
| Drum won’t turn |
Transfers motor rotation to drum |
| Loud squealing / thumping |
Replaces stretched or frayed belt |
| Burning-rubber smell |
New belt stops slippage & heat build-up |
| Damp clothes / long cycles |
Restores correct drum speed & airflow |
DIY install — about 15 minutes
- Unplug dryer; remove lint screen housing & front panel.
- Release belt tension at idler pulley; lift drum slightly to slide old belt off.
- Loop new belt around drum, idler pulley and motor pulley (ribbed side down).
- Re-assemble, run test cycle - enjoy quiet, consistent tumbling.
This part fixes the following symptoms
-
Heat stays on after drum has stopped
-
Will not tumble
-
Touchpad does not respond
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Broken dryer belt Bob B. • St Louis , MO • September 12, 2015
Unpluged dryer first. Then took the lint filter out and removed the two philips screws inside the lint filter lid. Then take a paint scraper just under the top of the dryer two inches from the left front corner and pushed in a little to release the snap connector and did the same on the right side. Then lifted top over. Then take a 5/16 socket or nut driver and remove the two screws on on the left inside panel, then the right side. Lean front out a little and remove the two wires one the back...
Read more
More
$14.64
- Compare At:
-
$17.42
- You Save:
-
$2.78
Genuine Whirlpool part
By: Whirlpool
Part Number: 279838
Restore full heat and end long dry cycles - install the Whirlpool OEM Dryer Heating Element.
Why this heating element?
- Factory-spec 5400 W / 240 V heating element with nickel-chromium coil - built by Whirlpool to Whirlpool OEM standards.
- Broad compatibility: fits Whirlpool, Kenmore 110-series, Roper, Estate, Amana, Maytag & more 27-inch dryers.
- Built to last: high-temp terminals & mica insulation resist fatigue and hotspots.
Fixes these common dryer problems
| Problem |
How the element solves it |
| No heat / cold drum |
Replaces burned-out coil to restore heating circuit |
| Takes forever to dry |
Full wattage brings drum back to target temperature |
| Stops mid-cycle |
Prevents over-cycling caused by faulty element |
| Burning smell |
New coil eliminates hot-spot arcing & insulation burn |
DIY install — about 20 minutes
- Unplug dryer and remove back panel to access heater housing.
- Disconnect wires; remove housing screws and slide assembly out.
- Swap old element for new, re-use hi-limit thermostat if still good.
- Re-assemble, run test cycle - enjoy fast, even drying.
This part fixes the following symptoms
-
No heat or not enough heat
-
Doesn't shut off
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015
After 22 years my Kenmore (Whirlpool) dryer stopped getting hot.
So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.
Here is a rundown of what I did and how long it took:
• Taking the back off and vacuum <1 minute
• Finding the components (from the...
Read more
More
$53.95
- Compare At:
-
$64.74
- You Save:
-
$10.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3387134
This Dryer Cycling Thermostat is an OEM replacement part for Whirlpool dryers. It monitors internal temperatures and cycles power to the heating element accordingly. The thermostat ensures the drying air reaches and maintains the optimal heat level selected for fast, effective drying results.
Symptoms of a bad cycling thermostat include:
- The dryer not heating or heating inconsistently
- Frequent trips of the circuit breaker
- Slower than normal drying times
- Burned clothes due to overheating
Causes of failure may be related to normal wear over time, dust buildup affecting sensor readings, or incorrect thermostat calibration.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Too hot
-
Timer will not advance
-
Takes too long to dry
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015
After 22 years my Kenmore (Whirlpool) dryer stopped getting hot.
So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.
Here is a rundown of what I did and how long it took:
• Taking the back off and vacuum <1 minute
• Finding the components (from the...
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 349241T
The Dryer Rear Drum Support Roller Kit is an OEM replacement part for Whirlpool dryers, as well as Kenmore, Samsung and other brands. This kit includes the rear support rollers that are crucial for maintaining proper drum alignment and smooth rotation during the drying cycle. Matching belt 341241 and idler pulley WP691366.
Symptoms of a faulty Rear Drum Support Roller Kit include:
- Excessive vibration or shaking during drying cycles
- Loud grinding or squeaking noises from the rear of the dryer
- Uneven wear or visible damage to the rollers
- Potential drum misalignment, rubbing against the drum casing, or leaks
Causes of a bad Rear Drum Support Roller Kit can include wear and tear over time, excessive load imbalances, or physical damage from impact or mishandling.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryer models.
Do-It-Yourself Stories from Customers like You
Thumping/vibrating/rattling pretty bad fixed 100%! Doug P. • Durham , NC • November 15, 2015
I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a...
Read more
More
$17.74
- Compare At:
-
$21.29
- You Save:
-
$3.55
Genuine Whirlpool part
By: Whirlpool
Part Number: 279816
This dryer thermal cut-off kit is an authentic OEM replacement part for Whirlpool and Kenmore dryers. It is designed to prevent the dryer from overheating.
This Kit Includes:
- High Limit Thermostat (250°F Limit)
- A Cut Off Fuse (309°F Limit)
- Female Spade Terminals
- Jumper Wires
Over time, these components can fail due to electrical issues, lint buildup blocking the exhaust vent, or normal wear and tear. A malfunctioning thermal cut-off kit can result in overheating, which can pose a safety hazard and affect the dryer’s performance.
Symptoms of a bad Thermal Cut-Off Kit include:
- Dryer not heating
- Dryer overheating
- Dryer shutting off mid-cycle
- No response when attempting to start the dryer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Timer will not advance
-
No heat or not enough heat
-
Too hot
-
Doesn't shut off
See more...
Do-It-Yourself Stories from Customers like You
My 22 year old dryer just stopped getting hot Michael M. • Brunswick , GA • November 04, 2015
After 22 years my Kenmore (Whirlpool) dryer stopped getting hot.
So I went ahead and reviewed the videos and figured I could repair it myself. It should be noted that the only part that failed the Ohm test was the thermal fuse. However, I figured that since I have it apart, I might as well go ahead and replace the heating element and the cycling thermostat.
Here is a rundown of what I did and how long it took:
• Taking the back off and vacuum <1 minute
• Finding the components (from the...
Read more
More
$45.95
- Compare At:
-
$55.14
- You Save:
-
$9.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP691366
The Idler Pulley is an OEM part for Whirlpool dryers, responsible for maintaining the correct tension on the drive belt, allowing it to remain tight and aligned, preventing slipping and contributing to the consistent rotation of the drum during cycles.
Symptoms of a bad Idler Pulley include:
- Squealing or squeaking noises
- The dryer drum failing to turn
- Excessive vibration or unusual sounds
Causes of failure can range from normal wear and tear, which can lead to the pulley's bearing wearing out, to the accumulation of lint and debris causing the pulley to seize or function improperly. Additionally, a cracked or damaged pulley can lead to belt misalignment and slippage.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Fits all Whirlpool-made dryers (Whirlpool, Kenmore with prefix 110, Roper, KitchenAid, and Estate). Matching belt 341241 and rear support rollers 349241T. Whirlpool dryer repair manual 677818L.
This part fixes the following symptoms
-
Will not tumble
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Thumping/vibrating/rattling pretty bad fixed 100%! Doug P. • Durham , NC • November 15, 2015
I am very glad to find the AppliancePartsPros.com website! Their instructional videos and easy parts reference made all the difference. I had originally planned to have someone come to fix my dryer, but no one was available for at least a week. I checked out their site, and after watching the videos I felt confident I could repair my appliance. I determined that a drum roller wheel had gone bad. Apparently it was going bad over the last five years since the dryer always seemed to rattle a...
Read more
More
$15.65
- Compare At:
-
$18.78
- You Save:
-
$3.13
Genuine Whirlpool part
By: Whirlpool
Part Number: 279827
The Dryer Drive Motor is an OEM part for Whirlpool dryers. This motor is the heart of the dryer, responsible for turning the drum and enabling the air to circulate properly throughout the machine.
Over time, dryer motors can suffer from wear and tear due to continuous use, accumulation of lint and debris, or overload from heavy laundry loads. These factors can lead to the motor overheating, losing power, or failing to start altogether.
Symptoms of a bad Dryer Drive Motor include:
- The dryer not starting when the start button is pressed
- Unusual noises, such as humming or buzzing
- The dryer stopping unexpectedly during cycles
- A burning smell coming from the dryer
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Will not tumble
-
Noisy
-
Shuts off too soon
See more...
Do-It-Yourself Stories from Customers like You
High pitched squeal: maybe a roller wheel maybe a bad felt bearing on drum maybe a rubbing fan wheel or just a burned out motor! Bruce K. • Pikeville , KY • September 06, 2014
My 12 year old Kenmore dryer problem started about 3 years ago with the motor just stopping.
My thing was:
I would turn it off and turn the drum by hand about halfway around and it would work again.
Last month, my wife said it stopped again and its making a loud noise,
but when I did "my thing" it still made a loud squealing noise (like I was killing a mouse).
I made time to work on it the next day, I took it apart, using the video instructions from AppliancePartsPros, I removed the top,...
Read more
More
$97.95
- Compare At:
-
$131.61
- You Save:
-
$33.66
Genuine Whirlpool part
By: Whirlpool
Part Number: 279570
The Door Latch Kit is an OEM replacement part for Whirlpool washers. This component is responsible for securely locking the washer door during the wash cycle, preventing it from opening unexpectedly and ensuring a safe and efficient operation.
Symptoms of needing to replace the door latch kit include:
- Difficulty in closing or latching the washer door
- Door opening unexpectedly during the wash cycle
- Leaks or water seeping due to an improper door seal
- Excessive wear or damage to the latch components
Causes of a faulty door latch kit can include normal wear and tear over time, physical damage due to impact or mishandling, or issues with the door alignment or strike plate.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.
This part fixes the following symptoms
-
Door won't close
-
Shuts off too soon
-
Doesn't shut off
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Dryer door latch worn out Kathy M. • San Diego , CA • February 22, 2015
When I looked up the part number there was a handy video that popped up. I watched the video and thought "how easy!" so, I ordered that part and waited. The next day, I thought I better start to take the door off of my dryer (because that's what the video instructed, and I wanted a head start) so as I was going into the garage to get my tools, my son came in with a small package. It was the part. That came, to quote another customer, "Crazy Fast!" All the way from Kentucky to California! ...
Read more
More
$6.95
- Compare At:
-
$13.85
- You Save:
-
$6.90
Genuine Whirlpool part
By: Whirlpool
Part Number: 279457
The Heating Element Connecting Wire is an OEM part for Whirlpool dryers, designed to provide a secure electrical connection to the dryer's heating element. This critical component ensures that the heating element receives the power it needs to generate heat for drying clothes.
Causes of a bad heating element connecting wire can include overheating, physical damage, or wear and tear over time. These issues can lead to a loss of connectivity, resulting in the heating element failing to heat up.
Symptoms of a bad Heating Element Connecting Wire include:
- The dryer not heating up despite having power
- Intermittent heating, suggesting a loose or faulty connection
- Unusual smells or signs of burning, indicating overheating or damage to the wire
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
No heat or not enough heat
-
Takes too long to dry
See more...
Do-It-Yourself Stories from Customers like You
Electric dryer ceased to produce heat Glenn M. • South Windsor , CT • September 23, 2016
Our 25-year-old Whirlpool dryer abruptly stopped producing heat, though it was otherwise running normally. The unit had never required service of any type and we were reluctant to replace it. After confirming that no circuit breakers had tripped, I reviewed the Whirlpool and AppliancePartsPro websites and concluded that the most likely causes of the problem were a failed heating element and/or thermal fuse. I ordered both (they arrived in two business days), installed them and the dryer...
Read more
More
$9.95
- Compare At:
-
$11.94
- You Save:
-
$1.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10512946
The Drum Support Wheel Retainer is an OEM part for Whirlpool dryers. This part secures the drum support wheels in place, ensuring that the dryer drum rotates smoothly and quietly during operation. The retainer is designed to fit precisely, preventing the support wheels from loosening or wobbling, which can lead to inefficient drying and increased wear on other components.
Over time, retainers can wear out or become damaged, potentially leading to a loose drum support wheel. This can cause the dryer to operate noisily, vibrate excessively, or even damage the drum itself if not addressed promptly.
Symptoms of a bad Drum Support Wheel Retainer include:
- Unusual noises, such as squeaking or thumping, coming from the dryer
- Excessive vibration during operation
- The dryer drum may feel unstable or wobble when turned by hand
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My whirlpool duet dryer started to squeal and rumble when the dryer was on Diana K. • Phoenix , AZ • September 20, 2014
I did a little research and found out that the dryer drum rollers needed to be replaced. I decided that since I would be replacing the 4 drum rollers that I should replace the belt and the belt drive pulley. This was a simple project thanks to YouTube. I used one of appliancepartspor videos to st me through the repair. Now I have a dryer that does not squeal like a pig!
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694089
The Blower Wheel is an OEM part for Whirlpool dryers. This component is crucial for the proper circulation of hot air within the dryer drum, ensuring efficient drying of clothes by directing airflow through the drum and out the exhaust.
Common causes of a bad blower wheel include accumulated lint and debris obstructing the wheel, physical damage from foreign objects, or general wear from prolonged use. A faulty blower wheel can significantly reduce drying efficiency and may cause the dryer to overheat.
Symptoms of a bad blower wheel include:
- Longer drying times for clothes
- Unusual noises during the drying cycle
- Overheating of the dryer
- Poor airflow from the dryer vent
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not tumble
-
Takes too long to dry
-
Noisy
See more...
Do-It-Yourself Stories from Customers like You
Broken blower wheel on dryer Mark B. • Independence , WV • April 12, 2014
I FOUND the website on t internet, found my part ordered it and watched the how to video ,repaired the dryer myself. Awesome Website.
Read more
More
$33.48
- Compare At:
-
$39.84
- You Save:
-
$6.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WP339956
The Lint Screen Housing Foam Seal is an OEM part for Whirlpool dryers. This seal is placed around the lint screen housing to prevent air leaks and ensure that the dryer operates efficiently by directing airflow properly through the lint screen. By maintaining a tight seal, this foam helps to optimize the dryer’s performance, reduce drying times, and prevent lint from escaping into the internal parts of the dryer, which can lead to potential maintenance issues and decreased efficiency.
Symptoms of a failing lint screen housing foam seal include:
- Increased lint buildup inside the dryer beyond the lint screen
- Longer drying times due to inefficient air circulation
- Excessive heat and humidity within the dryer
Causes of foam seal deterioration typically involve normal wear and tear, exposure to high heat which can degrade the material, or improper maintenance that can tear or dislodge the foam.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Takes too long to dry
-
No heat or not enough heat
See more...
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
$10.43
- Compare At:
-
$12.41
- You Save:
-
$1.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066184
The Motor Pulley is an OEM part for Whirlpool dryers, connects the dryer motor to the drum belt, enabling the drum to turn and efficiently dry your clothes. This pulley is crucial for the smooth operation of the dryer, ensuring that the belt is tensioned correctly and runs smoothly without slipping or causing wear.
Causes of a bad Motor Pulley include wear and tear from regular use, a buildup of lint and debris that can interfere with its operation, or a malfunctioning dryer motor that puts undue stress on the pulley.
Symptoms of a bad Motor Pulley include:
- Unusual noises coming from the dryer, such as squeaking or grinding
- The dryer drum failing to turn even though the motor is running
- The dryer taking longer than normal to dry clothes, which can occur if the pulley is not providing proper tension to the belt
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken motor pulley Michele D. • Jefferson , MA • December 11, 2015
Replaced pulley and belt.
Read more
More
$38.95
- Compare At:
-
$45.96
- You Save:
-
$7.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10359270
The Drum Support Roller Shaft - Left is an OEM part for Whirlpool dryers. It is specifically designed to support the drum roller, ensuring smooth rotation of the dryer drum during operation. This shaft is essential for maintaining the drum's alignment and stability, allowing for effective and efficient drying of clothes.
Causes of a bad drum support roller shaft can include wear and tear from regular use, accumulation of lint and debris, or damage from overloading the dryer. These factors can lead to the shaft becoming worn out or bent, impairing the dryer’s performance.
Symptoms of a bad drum support roller shaft include:
- Squeaking or grinding noises during the drying cycle
- The dryer drum not rotating smoothly or being off-balance
- Increased drying times or incomplete drying of clothes
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Old appliance with worn drum roller shafts and rollers Macario M. • Kingsville , TX • December 17, 2021
Use the videos on this website here and you can repair most brands. Many are duplicate in design.
1. Unplug the machine.
2. Move it away from a confined area to get more room.
3. Remove lint filter and the two screws that hold the exhaust filter port to the top of the cabinet.
4. Use a putty knife or actually a butter knife and release the top of the cabinet from the main drum housing. You will slide the knife between the top and the main cabinet at the plastic catches. Look for them and you...
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W11415783
The Seal is an OEM part for Whirlpool dryers. This specific seal is designed to fit around the blower housing, ensuring a tight seal that prevents air leaks within the dryer. The blower housing is a critical component of the dryer's air circulation system, which moves air through the drum to dry clothes efficiently.
Causes of damage to the Seal can include wear and tear from regular use, excessive heat degrading the material over time, or improper maintenance practices that can cause physical damage to the seal.
Symptoms of a bad Seal include:
- Longer drying times than usual
- Excessive heat buildup in the dryer
- Unusual noises from the dryer, such as rattling or buzzing
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gas dryer did not heat and excessive lint inside the unit James C. • New Boston , MI • July 20, 2017
Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered...
Read more
More
$16.75
- Compare At:
-
$19.93
- You Save:
-
$3.18