Kenmore Dishwasher 363.14181200 (36314181200, 363 14181200) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10282479
Removes residue, odor-causing soils, and food particles from dishwasher tub and gasket. Use monthly to eliminate unwanted odors and maintain peak performance.
More
$19.50
- Compare At:
-
$23.01
- You Save:
-
$3.51
Genuine Ge part
By: Ge
Part Number: WD8X228
Rubber baffle prevents leaks at dishwasher tub corner. Replace if worn, cracked, or causing water leakage during wash cycles. Snap-fit design.
Do-It-Yourself Stories from Customers like You
Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman".
I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it...
Read more
More
$12.95
- Compare At:
-
$24.06
- You Save:
-
$11.11
Genuine Ge part
By: Ge
Part Number: WD8X227
Prevents water leaks at the dishwasher door corners during wash cycles. Replace if you notice leaking along the bottom of the door. Clips onto tub rail.
Do-It-Yourself Stories from Customers like You
Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018
After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman".
I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it...
Read more
More
$12.95
- Compare At:
-
$24.06
- You Save:
-
$11.11
Genuine Ge part
By: Ge
Part Number: WD35X21038
Replacement roller and axle kit for dishwasher lower racks. Includes 8 wheels and 8 axles. Replace when rollers are broken, cracked, or missing.
Do-It-Yourself Stories from Customers like You
Dishwasher lower rack wheels were melted/broken and the rack wouldn't roll the washer would make a loud clunking noise while aggitating one of the rubber top tub restraints were broken Joseph Z. • Louisville , KY • September 23, 2016
I never respond to these kinds of requests but I must respond to this one because of your superior service!
The best story here was that I ordered the parts from AppliancePartsPros at 4:15 p.m. one day, and they were on my porch by 2:00 p.m. the next day!! I am very impressed, so please keep up the great work. I'll add that the prices were the best I found too.
The dishwasher wheels replacement didn't require tools & took less than 15 minutes.
The original design/materials are not very...
Read more
More
$30.71
- Compare At:
-
$36.54
- You Save:
-
$5.83
Genuine Ge part
By: Ge
Part Number: WD12X10304
Secures the end of the dishwasher rack slide rail. Replace if cracked, broken, or missing to prevent racks from sliding off track or misaligning.
Do-It-Yourself Stories from Customers like You
Water would not drain Paula M. • Crestview Hills , KY • November 14, 2014
Replaced the pump drain assembly
Read more
More
$10.74
- Compare At:
-
$24.73
- You Save:
-
$13.99
Genuine Ge part
By: Ge
Part Number: WD08X10057
Seals dishwasher door to prevent leaks during wash cycles. Replace if worn, torn, or causing water leakage. Press-fit installation, no glue needed.
Do-It-Yourself Stories from Customers like You
Water and soap leaking from door of our old GE profile performance dishwasher Wayne T. • Haines City , FL • June 10, 2018
My wife is attached to her old, simple, no bells and whistles dishwasher. When it started leaking from the bottom of the door, I looked up the possible fix and thought the price of the gasket probably out-valued the dishwasher. I thought that it was time to buy a new one. After looking at the prices of dishwashers (even with a Memorial Day sale) I was shocked at high they have gotten. The price of the gasket, which isn't even a third of the price of a bottom of the line DW, was looking even...
Read more
More
$81.95
- Compare At:
-
$107.94
- You Save:
-
$25.99
Genuine Ge part
By: Ge
Part Number: WD12X10327
Replacement roller and stud assembly for dishwasher racks. Installs on upper or lower rack to restore smooth gliding. Needed when rollers crack or studs break.
Do-It-Yourself Stories from Customers like You
Clips on top rack of washer were worn out. Top rack would fall off..down Tamara K. • Richmond , MI • April 06, 2014
Ordered the clips that we easy to find on line.
They can within a few days..and replaced them myself..didn't wait for my husband. Hardest part was getting the end caps off the metal rack to replace the rollers and clips. They fit in there spmehow. I used a screwdriver to get them out. Rest was a piece of cake
Lol
Read more
More
$16.95
- Compare At:
-
$22.39
- You Save:
-
$5.44
Genuine Ge part
By: Ge
Part Number: WD21X10261
Dishwasher won't start or runs intermittently? A faulty door interlock switch prevents operation when the door latch fails. DIY repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Melted door switch. Christopher K. • Greeneville , TN • February 03, 2024
The full story:
Dishwasher stopped running mid-cycle. When I first began troubleshooting I tried manually advancing the timer knob, and the machine would run. That led me to believe that the actual timer assembly was bad, so I replaced it. The dishwasher ran fine for a day, and then the same problem came back. This time, however, I also had to push in on the door to get it to run. I looked around online, and someone suggested that the door latch wasn't closing tightly enough. I adjusted the...
Read more
More
$18.22
- Compare At:
-
$21.50
- You Save:
-
$3.28
Genuine Ge part
By: Ge
Part Number: WD26X10013
Dishwasher not draining or leaving water in the bottom? This pump and motor assembly circulates and drains water. 2-hour DIY repair with video guide.
This part fixes the following symptoms
-
Won't start
-
Noisy
-
Will not drain
See more...
Do-It-Yourself Stories from Customers like You
It wasn`t pumping the water out Jimmy N. • Louisville , KY • August 05, 2014
I fixed it by installing a ge pump and motor assembly. it works fine
Read more
More
$193.28
- Compare At:
-
$263.74
- You Save:
-
$70.46
Genuine Ge part
By: Ge
Part Number: WD14X10009
The Hinge Arm Link is an OEM part for GE dishwashers. This component functions as a connection point between the dishwasher door and the hinge mechanism, allowing the door to open and close smoothly. The hinge arm link ensures that the door can bear the weight of itself, often laden with a mounted dish rack when fully loaded, without straining the hinges or misaligning.
Causes of damage to the hinge arm link often involve regular wear and tear from the constant motion of opening and closing the dishwasher door.
Symptoms of a bad Hinge Arm Link include:
- Difficulty opening or closing the dishwasher door
- A door that won't stay closed or opens unexpectedly
- Visible wear or damage to the hinge arm link, such as bending, breaking, or severe wear marks
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The hinge arm link broke Ronald I. • Las Vegas , NV • March 02, 2015
I watched the repair video and ordered the part ( I luckily ordered two links). The video was not exactly for my model dishwasher but I did follow the instruction for removal from the cabinet. Since my model was not shown, I was looking to see how the door spring and the Hinge Arm Link was supposed to be set up. I had the impression that the door spring and link was only on the right side of the dishwasher. I finally figured it out and took pictures of the set-up for the next time the link...
Read more
More
$6.53
- Compare At:
-
$8.36
- You Save:
-
$1.83
Genuine Ge part
By: Ge
Part Number: WD15X10003
Dishwasher not filling with water? A faulty water inlet valve is often the cause. This valve controls water flow into your dishwasher. 20-30 minute fix.
Do-It-Yourself Stories from Customers like You
Leaky inlet valve for dishwasher Don S. • Battle Creek , MI • April 22, 2014
Removed the old one. ordered a new one from appliancepartspros.com on Thursday afternoon, had the part on my front porch by Friday afternoon and installed it the next Monday morning. After I determined the problem, actual time fixing was maybe 30 minutes.
Read more
More
$51.55
- Compare At:
-
$84.87
- You Save:
-
$33.32
Genuine Ge part
By: Ge
Part Number: WD28X265
Replacement silverware basket with handle for your dishwasher. Needed when original basket is cracked, broken, or has worn holes that let utensils fall through.
Do-It-Yourself Stories from Customers like You
The utensil basket of our dishwasher was broken at the bottom Glenn T. • Glens Falls , NY • November 23, 2014
We ordered the item appliance parts pros said would fit our make/model. the part arrived in perfect condition faster than i could possibly imagine, and while it fit our machine, it was a big bigger than the original and it fits off-center, but i guess it works fine! excellent speed and ease of ordering. thanks
Read more
More
$75.95
- Compare At:
-
$91.14
- You Save:
-
$15.19
Genuine Ge part
By: Ge
Part Number: WD16X313
Dishwasher detergent cup won't stay closed or won't open fully? This soap dispenser lever controls detergent release. DIY repair in 15 minutes.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WD16X10011
Detergent cup won't stay closed? This dispenser latch secures the detergent cup during wash cycles. Direct replacement part with video guide available.
Do-It-Yourself Stories from Customers like You
Soap dispenser wouldn't close door kept falling down Graeme M. • Branford , CT • October 07, 2017
First replaced the latch, spring, and lever, but no improvement. Then I saw the lever arm on the other half of the door, which by position had to be the way that the timer interacts with the soap dispenser. After turning off the power to the dishwasher, I removed the switch cover (not obvious how -- a video would help: on the left, I slid the narrow rectangular plastic wire cover a little to one side and gently opened it on its little hinge, which is near the left side of the door, and then...
Read more
More
$14.42
- Compare At:
-
$17.16
- You Save:
-
$2.74
Genuine Ge part
By: Ge
Part Number: WD12X271
Replace broken or missing lower dishrack rollers and axles. Attaches to the bottom rack for smooth gliding when loading dishes. Sold as one roller kit.
Do-It-Yourself Stories from Customers like You
Bottom dishwasher rack needed new wheels Thomas C. • Alton , IL • December 19, 2014
I found my parts and ordered the six I needed, however I did not pick up on the difference from the front wheels to the rear wheels in the the descriptions. The rear wheels are narrower and I ordered all front wheels, six fronts instead of four front and two rear. I made it work by using the axle from the new wheel with two old narrow wheels.
Read more
More
$15.61
- Compare At:
-
$22.39
- You Save:
-
$6.78
Genuine Ge part
By: Ge
Part Number: WD12X10284
Replacement fill cap for dishwasher rinse aid dispenser. Covers the fill opening to contain rinse aid properly. Replace if cracked, missing, or worn.
This part fixes the following symptoms
-
Will not dispense detergent
See more...
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$15.95
- Compare At:
-
$20.05
- You Save:
-
$4.10