Kenmore Range 363.6204190 (3636204190, 363 6204190) Parts
Genuine Ge part
By: Ge
Part Number: WB44K5012
The Oven Bake Element is an OEM part for GE ovens. This element is located at the bottom of the oven and is primarily responsible for providing the heat necessary for baking. When the oven is turned on, electricity flows through the element, causing it to heat up and glow red-hot. This bake element has ¼” push-on wire terminals. If you are unable to use your old wire connectors, order TJMA02875-1.
Symptoms of a failing oven bake element include:
- Oven not heating up properly or taking longer to heat
- Uneven cooking or baking
- Element not glowing or only partially glowing during operation
- Visible signs of blistering, cracks, or holes on the element
Causes of oven bake element failure typically include general wear and tear from regular use, exposure to high temperatures which can weaken the element over time, or electrical issues such as short circuits.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven not heating evenly
-
Oven is too hot
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Element burn into Richard D. • Summerville , GA • April 02, 2014
Took out old element,got part number and look for the cheapest price online, Appliance Parts Pro could not be beat... order part be number, easy to match, came in fast and put in element, only needed a 5/16 nutdriver to take it out and put it in,unpluged wires and bent just a little to keep one on left and one right from getting mixed up and pluged up new element and ran in the 2 screws,easy job, dont get no easier.. Thanks again Appliance Parts Pro
Read more
More
$61.64
- Compare At:
-
$73.97
- You Save:
-
$12.33
Genuine Ge part
By: Ge
Part Number: WB32X106
The 8-Inch Large Drip Pan is an OEM part for GE ranges and cooktops. This drip pan is designed to sit beneath the heating element, catching any spills, drips, or overflow that occurs during cooking. It helps to protect the range from food debris and liquids, making cleaning easier and preventing damage to the stove's surface.
Symptoms of a failing Drip Pan include:
- Visible wear, rust, or corrosion on the pan
- Difficulty in fitting the pan securely beneath the heating element
- Accumulation of burnt food or discoloration that cannot be cleaned
- The pan becoming warped or damaged from high heat exposure
Causes of a bad drip pan can include regular wear and tear from frequent use, exposure to high temperatures, and spills from cooking. Over time, these factors can lead to rust, corrosion, and other forms of damage that necessitate replacement.
This OEM GE part is also compatible with some models from Hotpoint, RCA, and Kenmore.
Do-It-Yourself Stories from Customers like You
Couldn't find drip pans to fit my stove Sharon C. • Midway , TN • February 23, 2016
The drip pans I ordered fit my stove perfectly. I was extremely happy. I had tried drip pans from Wal Mart and Lowe's and they wouldn't sit right in the stove.
Read more
More
$12.77
- Compare At:
-
$16.38
- You Save:
-
$3.61
Genuine Ge part
By: Ge
Part Number: WB2X9719
The Support Bracket is an OEM part for GE ovens, designed to provide stability and support for the broiling element. This bracket is essential for ensuring the broiling element is securely positioned at the top of the oven, allowing for even heat distribution and optimal cooking performance when broiling foods.
Causes of damage to the support bracket often involve high heat exposure, accidental impacts during cleaning or cooking, or general wear and tear over time.
Symptoms of a bad Support Bracket include:
- The broiling element hanging lower than usual or touching the oven cavity, which can affect cooking performance and potentially damage the oven's interior.
- Unstable or loose broiling element, leading to uneven cooking or broiling.
- Visible signs of wear, damage, or corrosion on the bracket itself, indicating it may no longer provide adequate support.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower oven bake heating element was broken in half Richard P. • Colleyville , TX • September 19, 2014
Watched the appliancepartspro video and changed it out. It took about 15 minutes. I'm sure I saved hundreds.
Read more
More
$10.00
- Compare At:
-
$10.43
- You Save:
-
$0.43
Genuine Ge part
By: Ge
Part Number: WB48X10056
The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep.
Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down.
Symptoms of bad broiler pans include:
- Grease fires caused by dripping grease contacting the heating element
- A burnt or smoky flavor transferring to foods
- Difficulty removing baked-on grease and food deposits
- Pans that are misshapen or developing small cracks
This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges
Do-It-Yourself Stories from Customers like You
None Ralph W. • Brentwoo , NY • July 13, 2014
Fast delivery, great service
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Ge part
By: Ge
Part Number: WB44X232
The Broil Element is an OEM part for GE ovens. It provides the necessary heat for broiling by producing high-intensity radiant heat from the top of the oven, allowing for cooking and browning foods.
Causes of a bad broil element can include repeated high-heat exposure, physical damage from cleaning or food spills, and electrical surges.
Symptoms of a bad broil element include:
- Inconsistent or no heat during the broiling cycle
- Visible signs of damage, such as blisters or breaks in the element
- Sparking or unusual noises when the broil function is engaged
- Uneven cooking or browning of food
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
See more...
Do-It-Yourself Stories from Customers like You
Oven broil element was broken in half after self cleaning cycle Charles R. • Charlotte , NC • January 24, 2015
I needed to replace the oven broil element on my 15 year old GE range/oven unit. The broil element was broken in half during an oven self-cleaning cycle. Due to the age of the oven, I decided to replace both the broil and bake elements. I ordered the elements from Appliance Parts Pro. Their web site made it very easy to identify and locate the correct replacement parts. The parts arrived in 2 days. I watched the repair demo videos available for each element. Although the oven used in the demo...
Read more
More
$72.95
- Compare At:
-
$87.54
- You Save:
-
$14.59
Genuine Ge part
By: Ge
Part Number: WB14X104
The Right Door Hinge is an OEM part for GE ovens and allows the oven door opens and closes smoothly and securely. The hinge facilitates easy access to the oven's interior, contributing to a user-friendly cooking experience.
Over time, the right door hinge can wear out or become damaged due to frequent use and the constant stress of holding the door's weight. Causes of a bad hinge include metal fatigue, rust, and physical impact.
Symptoms of a malfunctioning Right Door Hinge include:
- The oven door feels loose or wobbly when opened or closed.
- Difficulty in fully closing the oven door, which may affect the oven's ability to maintain temperature.
- A noticeable squeaking or grinding noise during the door's operation.
- Visible wear or damage to the hinge itself.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
$48.95
- Compare At:
-
$58.25
- You Save:
-
$9.30
Genuine Ge part
By: Ge
Part Number: WB14X103
The Hinge, Left Side is an OEM part for GE ovens. It provides support and allows for the smooth operation of the oven door, ensuring it opens and closes properly.
Causes of a bad hinge can include wear and tear over time, rust or corrosion due to exposure to heat and moisture, and damage from accidental impact or improper handling.
Symptoms of a bad hinge, left side include:
- Difficulty in opening or closing the oven door
- Oven door not staying securely closed
- Door misalignment
- Squeaking or creaking noises when moving the door
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The left oven door hinge was siezing door would not open fully Tom J. • Powder Springs , GA • November 19, 2014
I ordered both hinges (if the nylon roller was bad on the left, it was probably going to go bad on the right side as well). The web site was easy to navigate, order process simple. Hinges arrived quickly. Slide the oven door up and off. unscrew the three screws for the hinge. You need to then pull up with some force (there is a big spring in there), and twist the hinge to get the last bit out. I used a hemostat to hold the spring and keep it from falling back into the hole. removed the...
Read more
More
$50.26
- Compare At:
-
$59.31
- You Save:
-
$9.05
Genuine Ge part
By: Ge
Part Number: WB17X210
The Range Terminal Block Kit is an OEM replacement part for GE electric ranges. It contains screw terminals that connect internal wiring throughout the range. The terminal block facilitates safe and reliable power transfer between critical components such as the control panel, heating elements, timers, and temperature sensors.
Causes of a faulty terminal block can include normal wear over time loosening wire connections, water exposure leading to corrosion, or physical damage from force or impact.
Symptoms of a bad terminal block include:
- Intermittent or complete failure of bake, broil, or surface heating elements
- Fault codes or error messages related to electrical malfunctions
- Loose, frayed, or broken wire connections inside the range
- Components like the control panel or timers not operating correctly
This OEM GE part also fits Hotpoint, RCA, and Kenmore electric ranges.
Do-It-Yourself Stories from Customers like You
The terminal block on my stove burned out Michael Y. • Fredericksburg , VA • November 28, 2014
Ordered a new terminal block kit from Appliance Parts Pros. Shipping was lightening fast. Slapped the new part on my stove and its never worked better. Thanksgiving was saved! I'd replace the rest of my stove's terminal blocks if they weren't $50 a piece...sheesh!
Read more
More
$65.95
- Compare At:
-
$78.48
- You Save:
-
$12.53
Genuine Ge part
By: Ge
Part Number: WB30X253
The 8" Surface Element is an OEM part for GE ranges. It is an 8-inch heating element that fits into the cooktop to provide heat for cooking.
Causes of a bad surface unit include wear and tear from regular use, damage due to heavy cookware, or electrical issues that prevent the element from heating correctly.
Symptoms of a bad surface unit include:
- The burner not heating up
- Uneven heating or hotspots
- Visible damage or burn marks on the element
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Needed new heating coils Judith C. • Stanhope , NJ • February 22, 2016
Ordered new heating coils for stove
Read more
More
$52.61
- Compare At:
-
$62.61
- You Save:
-
$10.00
Genuine Ge part
By: Ge
Part Number: WB23K5027
The Infinite Switch is an OEM replacement part for GE ranges. This switch controls the operation of the large heating elements on the cooktop. The element switch is responsible for regulating power delivery to the various heating elements based on temperature and function settings. It allows for precise heating control to maintain optimal cooking temperatures. Over time, element switches can wear down from repeated use and heat exposure.
Causes of a bad switch include burned-out or loose internal connections, damaged terminals, or defects in the electronic components.
Symptoms of a bad element switch include:
- Inability to turn elements on or off
- Elements not heating properly or unexpectedly shutting off
- Inconsistent or fluctuating oven or surface temperatures
- Electronic display or control issues
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Heat plate shorted and blew switch Joseph B. • Hillsdale , NJ • September 29, 2014
Swapped old with new. dead easy and fast delivery of part helped:
good service, thank you .
Read more
More
$99.26
- Compare At:
-
$118.12
- You Save:
-
$18.86
Genuine Ge part
By: Ge
Part Number: WB30X254
Restore reliable heat on your range's small burner with this 6-inch surface coil element. Replacing a worn or burned-out coil brings back consistent temperature response and dependable everyday cooking performance.
- Supplies direct electric heat to a 6-inch cooktop burner
- Replaces a coil that is warped, cracked, or has an open/burned-out section
- Common symptoms include: burner won't heat, heats unevenly, or works intermittently
- Visible damage, hot spots, or arcing at the terminals can indicate failure
What's included: One 6-inch surface coil element Install notes:
- Disconnect power by unplugging the range or switching off the circuit breaker
- Lift the old coil and pull straight out from the receptacle to remove
- Inspect the element receptacle/terminal block for discoloration or pitting; replace if damaged
- Align terminals and support, insert fully, and ensure the element sits level in the drip bowl
Do-It-Yourself Stories from Customers like You
Needed new heating coils Judith C. • Stanhope , NJ • February 22, 2016
Ordered new heating coils for stove
Read more
More
$56.22
- Compare At:
-
$66.90
- You Save:
-
$10.68
Genuine Ge part
By: Ge
Part Number: WB31M1
Electric range 6 inch surface unit drip bowl. Color: Chrome. It measures about 8 inches in diameter at its widest point at the top. For an 8 inch large drip pan order WB32X106
Do-It-Yourself Stories from Customers like You
Couldn't find drip pans to fit my stove Sharon C. • Midway , TN • February 23, 2016
The drip pans I ordered fit my stove perfectly. I was extremely happy. I had tried drip pans from Wal Mart and Lowe's and they wouldn't sit right in the stove.
Read more
More
$21.79
- Compare At:
-
$25.93
- You Save:
-
$4.14
Genuine Ge part
By: Ge
Part Number: WB23M24
6" element switch
Do-It-Yourself Stories from Customers like You
The burner would not stay at the temperature you wanted. It would go to high eventually. Ronald S. • Columbia , SC • February 05, 2022
Talked to a representative at your company they said it was probably the infinite switch.
I purchased all four switches, replaced all four burner switches. Very easy to do. In less than an hour to replace all four.
Read more
More
$98.95
- Compare At:
-
$118.74
- You Save:
-
$19.79
Genuine Ge part
By: Ge
Part Number: WB1M1
ST10-16 X 7/16"
Do-It-Yourself Stories from Customers like You
Bottom heating element not working on a ge electric range David K. • Portsmouth , RI • December 21, 2014
Move stove to unplug, remove rear center panel, indentify the two spade connectors that feed the heating element and remove (unplug) them. Remove two screws that hold the element to the inside rear wall of the stove and remove element. Install new element, plug in the previously removed spade connectors, re-install rear center panel, plug range (power) in, move stove back into place and enjoy.
Read more
More
$7.65
- Compare At:
-
$9.18
- You Save:
-
$1.53
Genuine Ge part
By: Ge
Part Number: WB1X1130
This replacement screw secures appliance components so panels, brackets, and assemblies stay tight and aligned. Replace stripped or missing hardware to eliminate rattles and keep your unit assembled safely and correctly.
- Fastens panels, brackets, or components to the appliance frame
- Restores a secure fit when the original screw is lost, stripped, or corroded
- Helps prevent vibration noise and movement during operation
- Supports proper alignment of trim and assemblies
What's included: One replacement screw Install notes:
- Disconnect power; for gas units, also shut off the gas supply
- Use the correct driver to avoid stripping the head; do not overtighten
- Inspect and address damaged mating threads, clips, or brackets before reinstalling
- Refer to your model's parts diagram to confirm location and quantity
Do-It-Yourself Stories from Customers like You
Broken door hinge on a ge wall mount double oven Cheryl A. • Mckinney , TX • June 18, 2018
We replaced the broken door hinge.
Read more
More
Genuine Ge part
By: Ge
Part Number: WB25T10042
This part is the lens for a small appliance light on select GE cooking products. It covers and diffuses the lamp, protecting the opening and restoring a clean, finished appearance so status illumination is easy to see.
- Covers and diffuses a panel/indicator light so it's visible without glare
- Helps shield the lamp cavity from grease, moisture, and debris
- Restores proper appearance if the original lens is cracked, missing, or discolored
- Common symptoms: missing or broken lens, cloudy/yellowed lens, exposed indicator lamp
What's included: Lens Install notes:
- Disconnect power to the appliance before servicing
- Access the lens from the rear of the panel or mounting area; release retaining tabs or hardware
- Seat the new lens fully and align any tabs before securing
- Restore power and verify the indicator light shines through clearly
Do-It-Yourself Stories from Customers like You
Indicator light stopped working Elizabeth C. • Olympia , WA • January 28, 2026
Super easy with your parts and directions
Read more
More
$7.95
- Compare At:
-
$9.38
- You Save:
-
$1.43