Kenmore Refrigerator 363.9507714 (3639507714, 363 9507714) Parts
Genuine Ge part
By: Ge
Part Number: WR30X10093
The Electromechanical Icemaker Kit is an OEM replacement part for GE refrigerators. It includes the ice maker assembly components responsible for harvesting, ejecting, and monitoring the ice-making process.
Symptoms of a faulty electromechanical kit include:
- Ice not being produced or dispensing properly
- The ice maker failing to turn on or stop automatically
- Strange noises emanating from the ice maker
Causes can be worn parts like the ejector assembly or drive motor, as well as electrical malfunctions. Continued use puts wear on components that regulate ice production.
This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today for reliable ice on demand.
This part fixes the following symptoms
-
Ice maker not making ice
-
Ice maker won't dispense ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
No ice and leaking water Jeff P. • Pinecrest , FL • November 01, 2019
Much easier than expected, I was certain it had to be a water line but the solved everything
Read more
More
$182.78
- Compare At:
-
$215.68
- You Save:
-
$32.90
Genuine Ge part
By: Ge
Part Number: WR02X11330
The Refrigerator Union Connector is an OEM replacement part for GE refrigerators. It is responsible for connecting the water supply lines from the kitchen plumbing to the refrigerator, allowing water to flow to the ice maker and water dispenser. The plastic connector assists your water dispenser by joining two 5/16 inch x 5/16 inch plastic water lines. Over time, Union Connectors can crack or break under pressure.
Causes of a bad Union Connector include wear and tear from repeated use, exposure to extreme fluctuations or surges in water pressure, or damage from accidental mishandling.
Symptoms of a bad Refrigerator Union Connector include:
- Water leaks at or near the connector area
- Inconsistent or no water flow to the ice maker/dispenser
- Fluctuations in water pressure to the fridge
- Water damage to surrounding kitchen areas from leaks
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Leaking
-
Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You
Water leaking from under/behind fridge (two sources) three problems a comedy of errors Joanne R. • Brookfield , WI • November 09, 2015
We noticed a puddle of water in front of the fridge a couple of months ago-dried the floor up both times and thought someone had dropped ice-or spilled water. A couple of weeks ago there was water dripping through the dropped tile ceiling in the basement. I shut off the water for the water supply to the fridge at the copper pipe in the basement and removed some of the tiles which felt a little damp. It still dripped all day. When my spouse came home he pulled down more of the tiles. It was as...
Read more
More
$6.53
- Compare At:
-
$9.03
- You Save:
-
$2.50
Genuine Ge part
By: Ge
Part Number: WR55X24064
The Run Capacitor is an OEM part for GE refrigerators. It plays a crucial role in the refrigerator's cooling system by providing the necessary start and run voltage to the compressor. Without a properly functioning run capacitor, your refrigerator may struggle to maintain the desired temperature, leading to spoiled food and inefficient energy use.
Causes of a bad run capacitor include electrical surges, wear and tear over time, or overheating due to a malfunctioning refrigerator compressor or poor ventilation.
Symptoms of a bad Run Capacitor include:
- The refrigerator compressor fails to start.
- Unusual humming noises coming from the refrigerator.
- The refrigerator cycles on and off more frequently than normal.
- A noticeable increase in energy consumption as the refrigerator struggles to maintain the proper temperature.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
Would not run led dimmed condenser fan would not run Pete M. • Santa Fe , NM • May 16, 2015
We replaced the main circuit board and the LED started to work and the condenser fan worked, but all we had were relay clicking sounds, but no cooling. The compressor had become so hot trying to work when the main circuit board was amiss, that it had popped the over temperature sensor on its side. As some one point out, if you remove the PTC+OLP assembly with the capacitor on it, and shake it, you will hear a rattle inside---and that is bad. We ordered a second round of parts from...
Read more
More
$50.95
- Compare At:
-
$60.12
- You Save:
-
$9.17
Genuine Ge part
By: Ge
Part Number: WR57X10051
The Dual Water Inlet Valve Kit is an OEM part for GE refrigerators. It controls the flow of water to both the ice maker and the water dispenser. This dual-function valve ensures that your refrigerator can produce ice and dispense water efficiently. The valve operates by opening and closing in response to signals from the refrigerator, allowing water to flow into the ice maker or water dispenser when needed.
The dual water inlet valve may wear out over time, especially in hard water areas, leading to issues like no ice production, malfunctioning water dispenser, or leaks.
Symptoms of a bad Dual Water Inlet Valve Kit include:
- No water being dispensed
- The ice maker not producing any ice
- A slow or irregular flow of water from the dispenser
- Water leaking from the valve
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Leaking
-
Ice maker not making ice
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Ice dispenser small leak from inlet line causing growing frozen water buildup in area around ice maker Robert T. • Fountain Valley , CA • October 08, 2022
To verify if you have a bad valve in the first place read on... I first pulled out the ice maker to remove all the frozen water including the inlet section which was a huge solid waterfall of ice. While it was out completely disconnected I cleaned/chipped out the freezer section ice puddle. I also completely melted the ice cubes and ice puddles off the ice maker at the fill bucket end in the sink with running water careful to not get water near the power cord area. I then put a tall plastic cup...
Read more
More
$51.95
- Compare At:
-
$64.71
- You Save:
-
$12.76
Genuine Ge part
By: Ge
Part Number: WR23X37285
The Light Switch is an OEM replacement part for GE refrigerators. It controls the interior light, turning it on when the refrigerator door is opened and off when the door is closed. This ensures proper illumination for visibility when accessing the refrigerator's contents.
A malfunctioning light switch can result from wear and tear, electrical issues, or damage caused by repeated use. Over time, the internal mechanism may fail, or the housing can crack, leading to improper operation.
Symptoms of a bad light switch include:
- Interior light not turning on when the door is opened
- Light staying on even when the door is closed
- Flickering or inconsistent light operation
- Difficulty pressing or releasing the switch
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator light switch broken. W W. • Bettendorf , IA • April 20, 2020
I ordered a new switch from APP and fixed my fridge.
However, the video posted for this repair on this site is not applicable to newer refrigerator models.
I have a 2015 GE GTE18IHCRSS and had to drop the control housing (#432 in the diagram) to attach the wire/plug assembly to the switch. Only had to remove the front screw with a 1/4" nut driver and that provided enough of a gap for me to plug in the switch.
So the correct method to replace the light switch in a newer model refrigerator is as...
Read more
More
$19.03
- Compare At:
-
$20.93
- You Save:
-
$1.90
Genuine Ge part
By: Ge
Part Number: WR9X489
The Defrost Timer is an OEM part for GE refrigerators. It serves as a crucial component in managing the defrost cycle of the refrigerator, ensuring that frost buildup is regularly melted away from the evaporator coils. This timer periodically switches the refrigerator between cooling and defrost mode, helping to maintain efficient operation and prevent overcooling or excessive ice accumulation.
Symptoms of a bad Defrost Timer include:
- Frost building up more than usual in the freezer compartment.
- The refrigerator or freezer sections becoming too warm due to prolonged defrost cycles.
- The refrigerator not transitioning out of defrost mode, leading to spoiled food due to inadequate cooling.
Causes of a bad defrost timer can include mechanical wear from continuous use, electrical failures that impede the timer’s operation, or simply aging components that no longer function reliably.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Fridge runs too long
-
Frost buildup
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Fresh foods section was not cooling but freezer was cold Cynthia B. • Loganville , GA • January 19, 2018
After reviewing a number of testimonials and your videos from your APP.com site I determined my most likely problem was either the defrost heater, thermostat, timer or possibly all three. The real challenge now began. Getting to the specific parts with my specific model number was a real challenge. It was not as easy as removing the light guard and 5 screws since my model had two Track Cant Shelf vertical rails restricting the removal of the back panel. Also, these rails could not be removed...
Read more
More
$41.95
- Compare At:
-
$49.59
- You Save:
-
$7.64
Genuine Ge part
By: Ge
Part Number: WR2X9391
The Light Socket is an OEM part for GE refrigerators. It is responsible for holding the refrigerator's light bulb and ensuring it receives power to illuminate the interior when the door is opened.
You should replace the light socket if it becomes faulty. Causes of a bad light socket can include wear and tear from regular use, electrical issues such as short circuits or power surges, and corrosion from moisture exposure.
Symptoms of a bad light socket include:
- The refrigerator light not turning on when the door is opened
- Flickering or intermittent light operation
- Visible damage or corrosion on the socket
- The light bulb not fitting securely or falling out
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Our light was flickering and didn't stop with a new bulb Dianne F. • Hampton , VA • February 14, 2015
I researched the model and watched a YouTube video on the repair. I ordered the part. Two days later it arrived and I made the repair. I'm all thumbs in home repairs, but had it done in 5 minutes. My husband was surprised. Nice that I can take care of a few simple repairs around the house.
Read more
More
$10.95
- Compare At:
-
$12.92
- You Save:
-
$1.97
Genuine Ge part
By: Ge
Part Number: WR62X23154
The Solenoid Valve Kit is an OEM part for GE refrigerators. This kit includes the solenoid valve, which is responsible for regulating the flow of refrigerant in the cooling system.
Causes of a bad solenoid valve kit include electrical malfunctions, physical damage, refrigerant leaks, or general wear and tear over time.
Symptoms of a faulty solenoid valve kit:
- Refrigerator not cooling properly or not maintaining consistent temperatures
- Compressor running constantly or cycling too frequently
- Frost buildup or ice accumulation in the freezer compartment
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Ice (broken seal) fizzer light out due to ice then auger motor auger coupler and solenoid cube failure Damon B. • Tumwater , WA • December 19, 2015
This was a two and half year issue as different things failed at different times. I would get one part, then another would fail. Ultimately, I got to a point where what failed, I hadn't been ordered the part yet.
The seal on the freezer door took three bathing's before it plumped up and un-creased. The directions on the box it is shipped in said to heat the seal up in hot water then cool it down with tap water. I didn't need to do that. It took a lot of massaging of the seal, but...
Read more
More
$99.95
- Compare At:
-
$118.94
- You Save:
-
$18.99
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WR72X207
The Drawer Slide Assembly is an OEM part for GE refrigerators. It allows for smooth and easy movement of the refrigerator drawers, ensuring convenient access to stored food items. It provides the necessary support and stability to hold the weight of the contents within the drawers. The slide measures approximately 16 1/4 inches long.
A bad Drawer Slide Assembly can occur due to wear and tear over time, excessive load strain, or damage caused by accidental mishandling. If the slide assembly becomes worn, bent, or broken, it can lead to issues such as difficulty in opening or closing the refrigerator drawers, as well as potential damage to the drawers or their contents.
Symptoms of a bad Drawer Slide Assembly include:
- Sticky or stiff movement of the refrigerator drawers.
- Drawer not fully extending or retracting.
- Excessive wobbling or sagging when the drawer is pulled out.
- Visible damage or wear on the slide assembly.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
For matching right hand side order WR72X206.
Do-It-Yourself Stories from Customers like You
Left side drawer rail was cracked John B. • Lincoln , MI • April 15, 2016
Ordered the part through e-mail based on the model number of the frig. When the part arrived,I looked at the set up from the right side and follwed the process for the right. Took me one minute.
Read more
More
$35.45
- Compare At:
-
$42.89
- You Save:
-
$7.44
Genuine Ge part
By: Ge
Part Number: WR60X187
The Condenser Fan Motor is an OEM part for GE refrigerators. It is designed to circulate air through the condenser coils, helping to dissipate heat and keep the refrigerator's internal components cool. This ensures efficient operation and prevents the compressor from overheating, which is essential for maintaining the refrigerator's performance and longevity.
You should replace the condenser fan motor if it becomes faulty. Causes of a bad fan motor can include electrical failures, wear and tear from regular use, or blockages that cause the motor to overheat or burn out. A malfunctioning fan motor can lead to inadequate cooling, increased energy consumption, and potential damage to other refrigerator components.
Symptoms of a bad condenser fan motor include:
- The refrigerator not cooling properly
- Unusual noises coming from the back of the refrigerator
- The compressor running hot or cycling on and off frequently
- The condenser coils feeling excessively hot
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Freezer section too warm
-
Noisy
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Side by side fridge had stopped cooling in both fridge and freezer and was hot to touch in center between the two Robert P. • King , NC • August 11, 2015
I googled the issue and read several articles. Most started with cleaning the coils (which mine are on the bottom) (19yr old Kenmore 363.9557812). I had not really ever cleaned them well, vacuuming did little. I had to remove the cardboard cover off the back of the frig, and blew them clean (front to back). Once that was done, I started cleaning from the back and noticed the fan wasn't turning week (condensor fan). Blew it out too, have it a good soon with a pencil, it puffed out a bunch of...
Read more
More
$226.48
- Compare At:
-
$269.51
- You Save:
-
$43.03
Genuine Ge part
By: Ge
Part Number: WR60X114
The Evaporator Fan Blade is an OEM component for GE freezers and bottom-mount refrigerator designs. Located inside the freezer compartment, this fan blade spins to circulate cold air evenly throughout the storage space.
Causes of a faulty evaporator fan blade include natural fatigue from running year-round. Freezers exposed to humid environments may experience faster corrosion.
Symptoms include:
- Abnormal sounds like knocking or clunking from inside the walls
- cold spots developing in certain freezer areas
- Higher power bills from inefficient temperature regulation
- Frost or ice patches forming on evaporator coils
This part is also compatible with some brands like Hotpoint, RCA, and Kenmore.
Do-It-Yourself Stories from Customers like You
Broken fan blade Thomas H. • West Blocton , AL • April 21, 2014
I used a set of ring pliers to remove the old retaining ring, then spread the plastic ribs around the fan motor shaft with a small flat bladed screwdriver to ease removal of the old fan blade. I reversed the process to replace the blade, gently tapping a socket from my socket wrench set placed over the motor shaft and ribs with a small rubber mallet. I stopped when the shaft protruded about 1/8" beyond the plastic ribs of the new fan blade, then installed the new retaining clamp ring with the...
Read more
More
$17.95
- Compare At:
-
$24.40
- You Save:
-
$6.45
Genuine Ge part
By: Ge
Part Number: WR17X11349
The Ice Maker Water Line is an OEM replacement part for GE refrigerators. It is an important supply line that delivers water from the main water source to the icemaker component. The water line allows water to flow smoothly, facilitating the icemaking process.
Causes of a bad water line can include cracks or punctures from impact or bending, mineral deposits and corrosion building up inside the line restricting flow, or improper connection fittings causing leakage.
Symptoms of a bad ice maker water line include:
- Irregular or insufficient ice production
- No water delivery to the icemaker despite activation
- Noticeable leaks or drips near the water line attachment points
- Strange knocking or hammering sounds are heard when the icemaker is running
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor Terry C. • Durham , NC • February 16, 2019
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,...
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Genuine Ge part
By: Ge
Part Number: WR2X8474
The Ice Maker Fill Tube Grommet is an OEM part for GE refrigerators. This grommet creates a seal between the ice maker fill tube and the refrigerator, preventing leaks and ensuring that water is properly directed into the ice maker during the filling process.
Causes of a bad grommet can include regular wear and tear, damage from exposure to freezing and thawing cycles, or degradation from exposure to water and moisture.
Symptoms of a bad ice maker fill tube grommet include:
- Water leaks around the ice maker fill tube area
- Ice maker not producing ice properly
- Visible cracks or deformation in the grommet
- Water pooling inside or around the refrigerator
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Leaking
-
Ice maker not making ice
See more...
Do-It-Yourself Stories from Customers like You
Had a cracked plastic ice maker inlet water tube that flooded part of kitchen floor Terry C. • Durham , NC • February 16, 2019
Replaced original (18 yrs.) 1/4" plastic tubing, clamp and grommet (AppliancePartsPros/GE parts) from outlet of ice maker water control valve to ice maker inlet. Also replaced water supply line to inlet of water control valve with new, GE braided, PEX 1/4" supply line with pre-attached female compression fittings on both ends. Repair job with AppliancePartsPros parts from outlet of water control valve went perfectly well, was simple, and had no leaks when tested. Parts were easy to install,...
Read more
More
$32.95
- Compare At:
-
$38.88
- You Save:
-
$5.93
Genuine Ge part
By: Ge
Part Number: WR2X7975
Refrigerator and freezer door bar end cap. Used on both the right and left hand side. Color: white. Measures about 2-1/2 inches high by 3 inches deep.
Do-It-Yourself Stories from Customers like You
Broken parts William B. • Smiths Station , AL • March 20, 2016
Replaced broken parts.
Read more
More
$26.95
- Compare At:
-
$33.42
- You Save:
-
$6.47
Genuine Ge part
By: Ge
Part Number: WR50X55
Open - 55, close - 35
This part fixes the following symptoms
-
Freezer not defrosting
-
Freezer section too warm
-
Fridge too warm
See more...
Do-It-Yourself Stories from Customers like You
Freezer iced up behind panel refrigerator not cooling Lisa S. • Camanche , IA • October 08, 2016
Ordered a ge thermostat part . Took everything out of freezer , unscrewed panel and took the plate out. Used a hair dryer to defrost ice. Took out old part and installed new part. Everything is working just fine!!! Used a meter to test old/bad part and indeed it was dead.
Read more
More
$8.71
- Compare At:
-
$30.42
- You Save:
-
$21.71