Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Kenmore Range 790.78402012 (79078402012, 790 78402012) Parts

Best Seller
Gas Oven Ignitor
Genuine Frigidaire part
By: Frigidaire
Part Number: 316489403

The Gas Oven Ignitor is an OEM replacement part for Frigidaire gas ranges and ovens. It uses electricity to generate a spark that ignites the burner flames for heating. To check if the ignitor is the issue, look inside the broiler oven while the oven is turned on. If the element is glowing a bright red, it's getting power. If not, it may not be getting enough power to ignite the gas and should be replaced.

Symptoms of a bad gas ignitor can include:

  • The oven or burners failing to ignite or stay lit consistently  
  • Diminishing heating performance over time
  • Burners that intermittently ignite or go out

Causes stem from normal wear with extended use. The ignitor's ability to spark diminishes as parts degrade. No spark means no gas ignition.

This OEM replacement part is compatible with Electrolux, Gibson, Kelvinator, and Kenmore brands.

Do-It-Yourself Stories from Customers like You Replacement of oven ignitor   Joe H. • South Abington Township , PA • February 05, 2021

My Kenmore 790.74139310 gas range was taking over 30 minutes to reach 350F. It used to take a little less than 10 minutes. The problem was the ignitor for the lower gas burner. It would glow but not pass sufficient current to increase the gas flow to the lower burner. Once at temperature, there is of course loss of heat when loading the oven with room temperature food. This took too long to recover, so we did not have proper temperature for proper cooking for the first 30 to 40 minutes. Food... Read more

More
$98.40
Compare At:
$116.11
You Save:
$17.71

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Oven Probe
Genuine Frigidaire part
By: Frigidaire
Part Number: 316490000

The Oven Probe is an OEM replacement part for Frigidaire electric ranges. As an essential safety device, it monitors internal temperatures accurately during baking and roasting cycles.  This probe measures approximately 8 inches.

Causes of a bad oven probe can include normal wear from continual high heat usage. Exposure to splatters or spills may damage fragile connection wires or compromise sensor accuracy over many years.

Symptoms of a bad oven probe are:

  • Inability to selectcooking modes like bake, roast or broil requiring temperature control  
  • Faulty or inconsistent temperature readings during heating
  • Error messages regarding probe malfunctions
  • Premature heating element burnouts without regulating feedback

This part is also compatible with Electrolux and select Kenmore models.

Do-It-Yourself Stories from Customers like You F10 error code started flashing and my oven shut itself off temperature control failed   John C. M. • Ruther Glen , VA • July 15, 2014

After I came from from work, my wife told me about the problem. I quickly began to research the code F10 which according to the paper in the pouch behind my range said it needed a new temperature control sensor and that should fix it. It also said that if that doesn't fix the problem that I'd have to replace the circuit board which probably got fried due to the runaway temperature. So, I decided to just order the temperature sensor part# AP3963654 for $25.63 plus shipping. I ordered the part at... Read more

More
$51.30
Compare At:
$60.53
You Save:
$9.23

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Light Bulb (40W)
Genuine Wci part
By: Wci
Part Number: 316538904

The Light Bulb (40W) is an OEM part for Frigidaire appliances. Specifically designed to fit and function with Frigidaire models, this 40-watt bulb illuminates the interior of your oven, making it easier to check on the progress of your baking or roasting without opening the oven door.

Over time, oven light bulbs can burn out or be damaged from high temperatures or accidental bumps during cleaning or cooking. A functioning light bulb is crucial for the optimal operation of your oven, enhancing visibility and improving your cooking experience.

Symptoms of a bad Light Bulb include:

  • The oven interior remains dark when the light switch is engaged.
  • Flickering light, indicating a loose connection or nearing the end of the bulb's lifespan.
  • Completely non-functional light, which can hinder your ability to monitor cooking progress.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You The bottom heating element wasn't working in top oven   Kevin Scott W. • Parker , CO • January 09, 2015

Before we replaced the board, my wife tried to replace just the element. We had one we had ordered several years ago when this same thing happened. When that didn't work we replaced the board and could see where the old board was damaged so we figured this was the solution. It would have been except the bottom element my wife used to replace the old element (which was fine but had been thrown out figuring the new one was new so why keep the old one) was 1" shorter in the back than the old... Read more

More
$23.95
Compare At:
$28.74
You Save:
$4.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Oven Broil Igniter
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304506545

The Oven broil Igniter is an OEM part for Frigidaire ovens and ranges. This component is responsible for igniting the gas in the oven burner, allowing the oven to heat up. It works by drawing electrical current through the igniter filament until it becomes hot enough to ignite the gas, providing the flame necessary for cooking.

Common causes for an Oven Igniter to fail include a burnt-out filament, a break in the igniter's ceramic base, or a malfunction within the igniter's electrical system.  

Symptoms of a bad Oven Igniter include:

  • Oven not starting or heating up
  • Gas smell when the oven is turned on 
  • Weak or no glow from the igniter element
  • Unusual noises when attempting to ignite the gas

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Oven ignitor failure   Andrew B. • Monticello , IL • April 01, 2014

Replaced ignitor. Very simple project. Read more

More
$83.75
Compare At:
$98.82
You Save:
$15.07

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Lp Conversion Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: GRLP4

The LP Conversion Kit is an OEM part for Frigidaire gas ranges. This kit allows for the conversion of the range's fuel type from natural gas to LP (liquefied petroleum) gas. It ensures the safe and efficient operation of the gas range when using LP gas as the fuel source.

Causes of a bad LP conversion kit can include incorrect installation, missing components, or damaged parts.

Symptoms of an improper fuel conversion or a bad LP conversion kit may include:

  • Uneven flame
  • Improper heating
  • Unusual gas smells

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Natural gas to propane conversion on kitchen stove   Ronald C. • Cumberland Foreside , ME • June 12, 2014

Finding the proper conversion kit was a snap. I just plugged in the model number and Appliance Parts Pros sent the proper conversion kit. Read more

More
$55.24
Compare At:
$65.18
You Save:
$9.94

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Surface Burner Cap
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508441

The Surface Burner Cap is an OEM part for Frigidaire gas ranges. It sits atop the surface burner and helps to distribute the gas flame evenly for consistent cooking performance. The cap also protects the burner head from spills and debris.

You should replace this surface burner cap if it becomes damaged or worn out. Signs of damage include chipping, cracking, or discoloration due to prolonged exposure to high temperatures or cleaning agents.

Symptoms of a bad surface burner cap include:

  • Uneven or unstable flame
  • Difficulty in igniting the burner
  • Visible cracks or chips on the cap
  • Food cooking unevenly

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Missing burner caps and grates   Riley H. • Reno , NV • September 05, 2016

Ordered replacement parts Read more

More
$37.95
Compare At:
$45.16
You Save:
$7.21

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Burner Cap
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508442

The Burner Cap is an OEM part for Frigidaire cooktops and ranges. It is designed to cover the burner head, ensuring an even distribution of the flame for efficient cooking. The burner cap also protects the burner head from spills and debris, which can affect performance.

You should replace the burner cap if it becomes damaged or worn out. Causes of a bad burner cap can include exposure to high heat, buildup of food residue, or accidental impacts. A compromised burner cap can lead to uneven flames, inefficient cooking, or difficulty in lighting the burner.

Symptoms of a bad burner cap include:

  • Uneven or yellow flames
  • Difficulty in igniting the burner
  • The burner cap being cracked, chipped, or discolored
  • Poor cooking performance or hotspots on cookware

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You Missing burner caps and grates   Riley H. • Reno , NV • September 05, 2016

Ordered replacement parts Read more

More
$33.95
Compare At:
$40.06
You Save:
$6.11

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Spark Module Kit
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304508269

The Spark Module Kit is an OEM part for Frigidaire ranges. This kit includes the spark module and necessary components for installation, responsible for providing the electrical spark needed to ignite the gas burners on the stove.

Common causes of a bad spark module include electrical faults, wear and tear from regular use, or damage from power surges.

Symptoms of a bad spark module include:

  • Burners not igniting
  • Weak or inconsistent sparks
  • Clicking sound without burner ignition
  • Only some burners igniting

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You No ignition spark on any of the top burners of fridgidaire oven   Ronald C. • Loveland , OH • June 29, 2014

Replaced spark module - oven was less than two years old. Like a lot of new gas ovens, turning on any one burner to 'lite' sends sparks to all 5 top burners. The difficulty was getting to the spark module, as some generic videos show access to it from the upper panel on the back of the oven, but it wasn't there. Had to take off the entire top burner panel of the oven to get to the module, and then it was simple to replace the module by transferring the wires to the new one. I did see on... Read more

More
$75.41
Compare At:
$89.74
You Save:
$14.33

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ignitor/Orifice Assy
Genuine Frigidaire part
By: Frigidaire
Part Number: 316536602

The Igniter Orifice Assembly is an OEM component for Frigidaire gas ranges. It is an integrated assembly housing both the electric ignition wire and adjustable gas orifice or restrictor needed for controlled gas flow.

Symptoms of a bad ignitor orifice assembly include:

  • Burners failing to light or requiring multiple igniter clicks
  • Flames that are irregularly shaped, oversized, or yellow-tipped
  • Burners ignite but flame size is not adjustable across settings
  • Gas smells were detected without an obvious leak at the connections

Over time, normal use can cause an orifice to deteriorate or crack while ambient gases degrade igniter wires.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Ignitor failed / screw that attached burner to ignitor stripped   Michael M. • Roundhill , VA • May 17, 2015

Ordered new Ignitor / Orifice and screws Mike was a great resource, he helped me thru the project. Read more

More
$90.31
Compare At:
$106.57
You Save:
$16.26

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Cap
Genuine Frigidaire part

Cap

By: Frigidaire
Part Number: 5304508443

The Range Cap is an OEM part for Frigidaire ranges. It seals the upper combustion chamber to contain heat from the oven burners. A tight-fitting cap is critical for efficient, safe oven performance.  This cap measures 3 inches in diameter.

Causes of a bad cap can include cracks, warping, or collapsed seals from prolonged exposure to high oven temperatures. Accidental damage during past maintenance is also possible.

Symptoms of a bad cap include:

  • Escaping heat from the oven chamber, reducing efficiency
  • Flames or sparks visible around the cap during baking
  • Loose, wobbly, or missing cap allowing grease and debris in the combustion area

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Missing burner caps and grates   Riley H. • Reno , NV • September 05, 2016

Ordered replacement parts Read more

More
$49.95
Compare At:
$59.94
You Save:
$9.99

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Ignitor Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 316240600

The Ignitor Screw is an OEM component for Frigidaire ranges and ovens. It secures the igniter, a critical heating element that sparks to ignite the gas burner. 

Causes of a bad ignitor screw can include damage or stripping of the screw head from repeated removal/installation of the igniter component over time.

Symptoms of a bad ignitor screw include: 

  • The igniter shaking loose and becoming disconnected
  • Inability to properly tighten the igniter securely in position
  • Lost or stripped screw

This genuine Frigidaire replacement screw restores secure mounting of the igniter. Proper fastening is necessary for consistent and reliable ignition of cooking appliances.

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

Do-It-Yourself Stories from Customers like You Slow to ignite   Matthew F. • East Peoria , IL • October 07, 2019

It took a little longer then I was hoping but wasn’t terrible. If the burner is very old at all make sure to get the new screws. Both of mine snapped when trying to remove them. The new one works great. Read more

More
$14.95
Compare At:
$17.79
You Save:
$2.84

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Regulator
Genuine Frigidaire part
By: Frigidaire
Part Number: 316091711

The Regulator is an OEM replacement part for Frigidaire gas ranges and cooktops. It is a valve component that regulates gas flow from the supply line into the appliance burners. Carefully controlling fuel input maintains proper and safe burner flame sizes.

Symptoms of a bad regulator include:

  • Burners producing uneven or excessively high flames
  • Inability to reduce burner flames properly  
  • Gas leaks at the regulator connections

Causes of failure involve wear of internal sealing parts over extended use. Corrosion or debris clogging gas passages can also disrupt flow regulation.

This OEM Frigidaire replacement regulator ensures optimal and reliable burner performance. Compatible with some Amana, Electrolux, and KitchenAid models as well, regular replacements prevent dangerous gas line issues from developing. 

Do-It-Yourself Stories from Customers like You Gas regulator leaking   Garlan Y. • Fullerton , CA • February 16, 2016

Replaced the regulator with part #AP5802175. Watched the video when purchasing, and it was spot on. Would have taken me about 15-20 minutes if I had access to a vise, to remove one of the fittings. Was able to get it out using two wrenches, but it was not without a bit of elbow grease. The new part went in easily. Turned on valve on regulator, plugged in the power, turned on the gas valve, done. Everything worked fine. Easy job for anyone with just a few tools. Read more

More
$75.21
Compare At:
$89.50
You Save:
$14.29

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 316540900

The Screw is an OEM part for Frigidaire ranges and cooktops. This part secures the burner head in place, ensuring proper alignment and functioning of the burner.

Causes of a bad burner head screw can include loosening due to repeated heating and cooling cycles, damage from impact or mishandling, or simply wear and tear over time.

Symptoms of a loose or missing burner head screw include:

  • Uneven or irregular flame pattern on the burner
  • Burner head not sitting flush or properly aligned
  • Burner head wobbling or moving during use
  • Potential gas leaks if the burner head is not securely fastened

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Ignitor failed / screw that attached burner to ignitor stripped   Michael M. • Roundhill , VA • May 17, 2015

Ordered new Ignitor / Orifice and screws Mike was a great resource, he helped me thru the project. Read more

More
$19.95
Compare At:
$23.74
You Save:
$3.79

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Oven Light Socket
Genuine Frigidaire part
By: Frigidaire
Part Number: 316116400

The Oven Light Socket is an OEM replacement part for Frigidaire electric ranges and wall ovens. It houses the bulb that illuminates the interior of the oven cavity.

Causes of a bad light socket can include a loose or broken connection due to regular use, scorched or burnt terminals from overheating, or damage from moisture.

Symptoms of a bad light socket include:

  • The oven light not turning on when activated  
  • Flickering or intermittent bulb operation
  • Signs of corrosion or oxidation around the bulb base
  • Excessive heat emission from the light area

This OEM Frigidaire replacement part is also compatible with ranges and wall ovens from Electrolux, Gibson, and Kelvinator. 

Do-It-Yourself Stories from Customers like You Light socket inside oven broke   Linda S. • Novato , CA • June 02, 2015

Had to pull double oven and range top out from wall which involved removing the upper kitchen cabinet. Took the sheet metal off the back and had the socket swapped out in a couple of minutes. My old oven works like a charm! Read more

More
$51.23
Compare At:
$61.48
You Save:
$10.25

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Orifice Nat
Genuine Frigidaire part
By: Frigidaire
Part Number: 316527500

The Burner Orifice is an OEM part for Frigidaire cooktops and ranges. It is a critical component that controls the flow of gas to the burner, ensuring a consistent and stable flame for cooking. The orifice regulates the amount of gas released to the burner, which in turn affects the size and intensity of the flame.

Causes of a bad burner orifice can include food debris or grease build-up, corrosion from prolonged exposure to gas, or physical damage from cleaning or handling.

Symptoms of a bad burner orifice include:

  • Uneven or irregular flame
  • Burner not igniting
  • Weak or yellow flame
  • Gas smell near the burner

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Do-It-Yourself Stories from Customers like You The orafices were set up for propane and i needed them for nutural gas   Arnold M. • Belen , NM • December 14, 2015

Found the parts I needed ordered them from your site Received them and installed in a few minuets and was done Read more

More
$29.95
Compare At:
$35.34
You Save:
$5.39

IN STOCK
Ships Today Guaranteed
Add to Cart
Best Seller
Orifice Nat
Genuine Frigidaire part
By: Frigidaire
Part Number: 316527504

The Burner Orifice is an OEM replacement part for Frigidaire gas ranges and cooktops. It controls the mixture of gas and air delivered to each burner element.  

Symptoms of a faulty orifice can include:

  • Inconsistent or unpredictable burner flame heights 
  • Yellow flames that create excess soot or carbon buildup
  • Potential risk of flashback into gas lines

Causes may involve gradual damage from normal usage, such as cracks developing. Improper cleaning can deposit residue that changes flame characteristics as well.

This OEM Frigidaire replacement restores balanced gas flow regulation. Compatible with ranges from Electrolux, Gibson, and select Kenmore models.

Do-It-Yourself Stories from Customers like You The orafices were set up for propane and i needed them for nutural gas   Arnold M. • Belen , NM • December 14, 2015

Found the parts I needed ordered them from your site Received them and installed in a few minuets and was done Read more

More
$31.95
Compare At:
$38.02
You Save:
$6.07

IN STOCK
Ships Today Guaranteed
Add to Cart
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store