Lg Wall Oven 85000 Parts

I bought a house that had an old (but serviceable) Kenmore microwave over the stove. When I cooked on the stove the poor microwave filters couldn't do their job and the whole house got stunk out.. I drove to Sears who didn't stock them. I went online to Sears.com and they didn't stock them either. Then I found AppliancePartsPros.com and they had everything really cheap!! I ordered them and immediately replaced the grease filters with no tools. I looked at the schematic drawing for the... Read more

Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no... Read more

Needed installation parts. I ordered the parts from the company I purchased the appliances from. A week went by and no parts, called, emailed and called again to find out when the parts would arrive to be able to Re-schedule the installation. After the run around, I found AppliancePartsPros website and placed my order with them. I received the parts I needed within the time they promised. I was able to schedule my installation to enjoy my new appliance. It's been almost 4 weeks and still no... Read more

• Won't start

Called AppliancePartsPros because of good experiencing diagnosing problem with a dishwasher repair. We definitely are modest income amateurs! Same excellent response to our questions. Three possible causes. Used easy search menu to fine replacement parts. Bought all three, knowing that if all not needed, the others could be returned (within 365 days) for refund. Replaced the capacitor successfully after calling to get more help with a couple of places where we got stuck. Oven now works... Read more

• broken bulb

Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more

Knowing the odds of 2 failures occurring at the same exact time was unusually high, I just searched your site for what other broken items might affect these two failures. Came up with next control item upstream and tallied that item failure with percentages of successful repairs, (4 mins.) door safety switch. Since I had to change out the most likely of the 3 and since I was already was going to be into the switch panel I ordered all 3 and swapped them all out to cover my butt, as they were... Read more

Careful placement of new screws into the inside of the outer door that now hold the frame assembly to the door secured the frame assembly to the outer door. All of the other parts I bought and replaced were a waste of money. I figured since I had them I might as well install them anyways. Easier than sending them back since I had the whole thing apart anyways. The part I really needed was no longer available, the outside door. The glass reinstalled into the retainers in the door without a... Read more

I have a multimeter so I was able to check the fuse per website recommendations and it was blown. However, the capacitor on the microwave was also original so I elected to replace the capacitor, fuse, and the ground protect diode. The repair was very simple (making sure the capacitor was discharged before replacing) and the microwave is now up and running again. Excellent trade to buy $40 worth of parts rather than a new $400 microwave. One nit - Kenmore puts a screw in the back that... Read more

Replaced turntable motor and coupler Read more

No fix, just replace Read more

Careful placement of new screws into the inside of the outer door that now hold the frame assembly to the door secured the frame assembly to the outer door. All of the other parts I bought and replaced were a waste of money. I figured since I had them I might as well install them anyways. Easier than sending them back since I had the whole thing apart anyways. The part I really needed was no longer available, the outside door. The glass reinstalled into the retainers in the door without a... Read more

Screwdriver to remove plastic rivets. Remove the old cover and replace it with the new one. Read more

Added an additional light socket to the existing reflector. Changed the original 40 watt incandescent bulb to two 5 watt LED bulbs. It's actually bright enough for my old eyes now. Read more