Maytag Washer Dryer Combo SG1000T Parts

The Drum Support Roller is an OEM replacement part for Whirlpool dryers that is responsible for supporting the drum and allowing it to rotate smoothly. Causes of a bad Drum Support Roller can include lint and debris that accumulates and causes the rollers to malfunction or seize.

Causes of bad Drum Support Rollers can include wear and tear over time, excessive load imbalances, or physical damage from impact or mishandling.

Symptoms of a bad Drum Support Roller include:

• Unusual noises, such as thumping or squealing.
• The dryer drum struggling to rotate or not turning smoothly.
• Increased vibration or shaking of the dryer during operation.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Tumbler Bearing Kit is an OEM replacement part for Whirlpool washing machines. It includes multiple replacement glides that support the movement of the wash basket or tub. As it rotates during the wash cycle, the tub experiences friction that the bearings help manage.  For rear drum support rollers, order 12001541. Please note that repair requires two kits.

Symptoms of bad bearings include:

• Excessive noise or vibrations emanating from the tub area
• Difficulty rotating or spinning the tub by hand  
• Visible wear on the bearings
• Premature breakdown of other components due to increased stress

Causes of bearing failure can be normal wear over time from the consistent rotational motion. Using the washer with an unbalanced load can accelerate bearing deterioration.

This OEM Whirlpool kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The Retaining Clip is an OEM part for Whirlpool stand mixers. This small but essential part ensures the stability and secure fitting of various mixer components, contributing significantly to the appliance's overall performance and durability. Its primary role is to hold parts in place, preventing movement that could lead to wear or malfunction during operation.

Stand mixers are subjected to a variety of stresses, particularly when mixing thick doughs or other dense mixtures. The retaining clip's integrity is vital in these situations, as it helps to maintain the correct alignment and functioning of the mixer's moving parts. 

Symptoms of a bad Retaining Clip in a stand mixer include:

• Components such as beaters or attachments becoming loose or detaching during use.
• Unusual vibration or noise 
• Difficulty in attaching or detaching mixer attachments  

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Hi-Limit Thermostat is an OEM replacement part for Whirlpool gas dryers. As a safety device, it monitors internal drum temperatures during cycles to prevent overheating.  If the temperature rises to 200 degrees Fahrenheit, the heating element will cut off. It will resume operation once the temperature drops to 170 degrees Fahrenheit. Featuring two (2) male 1/4" terminals, this thermostat is designed for flush mount installation. Its electric dryer hi-limit thermostat is rated at L200-30F

Causes of a bad hi-limit thermostat can include exposure to excessive temperatures over an extended period. Failure to safely vent moist air outside may cause thermal expansion cutting off electrical control.

Symptoms of a bad hi-limit thermostat include:

• Inability to complete dryer cycles or premature shutoffs  
• Flashing error codes or indicators related to heat
• Sudden lack of heat even when dryer functions normally
• Tripping of household circuit breakers during drying

This OEM part is also compatible with brands like Maytag, Amana, and Kenmore models. Replace yours to ensure thermal safety.

The Drum Felt Seal is an OEM part for Whirlpool electric and gas dryers. Located between the drum and front panel, this multi-layered seal helps prevent lint buildup and moisture escape during cycles.  

Causes of a bad dryer drum felt seal can include cracking, flaking or separation of felt layers from age. Oil or other residue trapped in the fibers can also degrade sealing efficiency.

Symptoms of a bad dryer drum felt seal include:

• Trapped moisture inside dryer drum between loads
• Longer drying cycles to remove all moisture
• Excess lint visible behind and around the felt seal

This genuine Whirlpool OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Fiber Washer is an OEM part for Whirlpool appliances. This washer provides a reliable seal and is used in various connections within the appliance to prevent leaks and ensure secure fittings. Its fiber construction offers durability and resistance to wear, making it ideal for maintaining tight seals in high-pressure or high-temperature environments.

Common causes of a bad fiber washer include degradation from water or chemical exposure, physical damage from over-tightening, and natural wear and tear.

Symptoms of a bad fiber washer include:

• Water or fluid leaks at connection points
• Loose fittings or connections
• Visible wear, cracks, or deformation of the washer
• Decreased performance of the appliance due to improper sealing

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.

This part fixes the following symptoms:

• Loose or wobbly components within the appliance
• Panels or parts that are not securely attached
• Rattling or unusual noises due to loose parts
• Damaged or missing screw

The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This Hex Nut is a small but critical fastener used to secure brackets, panels, and internal assemblies in your appliance. Replacing a stripped, corroded, or missing nut restores a tight, rattle-free, and safe installation.

• Threads onto a matching bolt or stud to clamp parts together
• Helps maintain alignment and reduce vibration-related loosening
• Commonly used on panels, brackets, supports, and internal assemblies
• Replace when threads are damaged, hex flats are rounded, or hardware is missing
• Symptoms can include loose or rattling components or hardware that won't stay tight

• Disconnect power and, if applicable, shut off gas or water before servicing
• Use the correct-size nut driver or wrench to avoid rounding the hex
• Start the nut by hand to prevent cross-threading; tighten snugly without over-torquing
• Inspect and replace any damaged mating bolt/stud or washer for a secure repair

This dryer tumbler seal fits at the front or rear of the drum to close the gap with the bulkhead. It restores proper airflow, reduces friction and noise, and helps prevent clothes from snagging at the drum edge.

• Seals the drum-to-bulkhead gap to maintain correct airflow and drying performance
• Provides a smooth surface that helps reduce squealing, scraping, or thumping noises
• Helps prevent clothing from catching at the drum opening
• When worn, symptoms include longer dry times, increased cabinet lint, or frayed/missing seal material

• Disconnect power; shut off gas supply for gas dryers
• Access the front or rear bulkhead per your model; remove panels/drum as needed
• Remove the old seal and clean mating surfaces thoroughly
• Install the new seal evenly; if your model requires adhesive, follow the service manual; hand-rotate the drum to verify clearances before reassembly

This terminal insulator assembly isolates and supports an electrical connection where it passes through the appliance chassis. Replacing a cracked or heat-damaged insulator helps prevent shorts and restores a safe, reliable connection.

• Electrically insulates a live terminal from the metal cabinet or oven wall
• Provides a secure pass-through/mounting point for the element/wire connection
• Helps prevent arcing, shorting, and localized heat damage at the connection
• Typical symptoms: visible cracks or burn marks on the insulator, tripped breaker, intermittent or no heat due to a compromised connection

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the terminal area; label or photograph wiring to ensure correct reassembly
• Transfer wires one at a time; reuse existing hardware if serviceable and tighten connections securely
• Inspect nearby wire ends/connectors and replace any that are heat-damaged or brittle

This clip and insulator assembly secures and electrically isolates a component inside a range or wall oven. It keeps the part firmly positioned while preventing shorts and heat damage, supporting accurate, safe appliance operation.

• Holds the designated component against the oven liner or chassis
• Ceramic insulator provides electrical isolation in high-heat areas
• Maintains correct spacing and alignment for reliable performance
• Replaces a missing, bent, or heat-cracked clip/insulator to stop rattles or arcing

• Disconnect power; allow the appliance to cool fully before servicing
• Wear gloves and eye protection
• Access the mounting point; transfer the component into the new insulator and secure with the clip without pinching wires or capillary bulbs
• Restore power and verify proper operation

Specs: No.8X1/2 HEX WASHER HEAD

A single pop rivet used to secure sheet-metal parts and small brackets on appliances for a permanent, vibration-resistant hold. Replaces missing or damaged rivets to restore proper attachment without welding. What it does:

• Provides a permanent blind-rivet fastening point for panels, brackets and trim.
• Replaces rivets that are sheared, loose or missing and prevents rattling or misalignment.
• Ideal where a solid, tamper-resistant join is required and screws aren't suitable.
• Works with a compatible pop-rivet tool for quick installation.

• Drill out the old rivet carefully; use the proper size hole for the replacement rivet.
• Use a dedicated pop-rivet tool and wear eye protection during installation.

This ground screw secures the appliance grounding conductor to the chassis for a reliable electrical ground connection, helping maintain safety and proper operation. It's a direct-fit fastener used where a dedicated ground screw is required. What it does

• Fastens the grounding conductor to the appliance frame to maintain a secure earth/ground connection.
• Helps prevent electrical shock and reduces risk of stray voltage on the chassis.
• Addresses symptoms like intermittent or absent grounding and loose or corroded ground connections.
• Used wherever the original equipment grounding screw has been lost, damaged, or corroded.

• Disconnect power at the breaker and unplug the appliance before starting any work.
• Only attach to designated grounding points on the chassis; ensure the mating surface is clean and free of paint or corrosion.
• Use the correct driver and moderate hand torque—do not overtighten to avoid stripping threads.

This replacement screw fastens appliance panels, brackets, and components. Use it to replace missing, stripped, or rusted hardware to restore a secure fit and help reduce vibration or rattling during operation.

• Secures panels, brackets, and internal components to the cabinet or frame
• Helps prevent vibration, rattling, and misalignment from loose hardware
• Replaces a missing, rusted, or stripped original screw
• Matches the original fastener style for proper fit in specified locations

• Disconnect power; shut off gas and water supplies before servicing
• Use the correct screwdriver or nut driver and match length/thread to the original
• Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic or thin metal

The Dryer Drum Roller Axle is an OEM part for Whirlpool dryers. It plays a role in the dryer's operation by offering support and an axis for the drum roller to spin smoothly. This guarantees effective and balanced tumbling of clothes throughout the drying cycle. 

Causes of a bad Dryer Drum Roller Axle can include prolonged use leading to wear and tear, accumulation of lint and debris causing additional friction, or improper loading of the dryer drum which can bend or strain the axle.

Symptoms of a bad Dryer Drum Roller Axle include:

• Unusual noises, such as squeaking or grinding, during the operation
• The dryer drum struggling to turn or not turning at all
• Increased vibration or shaking of the dryer unit
• Clothes taking longer to dry or not drying evenly

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.