Bosch Dishwasher SGO45N08EU Parts
Genuine Bosch part
By: Bosch
Part Number: 00424410
Fix a dishwasher that won't power on or reset with this on/off switch. Replaces worn or moisture-damaged switches. DIY-friendly installation.
Do-It-Yourself Stories from Customers like You
The switch stopped working Kirk B. • Pelham , AL • March 24, 2014
Initially performed troubleshooting over the phone with Bosch customer support and did preliminary research on the web. Ultimately had to call out service technician to isolate/confirm problem. He confirmed the problem was most likely the switch (if not, the actually computer processor) and gave me the part number (since it was going to take 10 BD's for him to get the part). I ordered through Appliance Parts Pros and received the part in only 2 days. However, upon trying to install it, I...
Read more
More
$62.68
- Compare At:
-
$74.59
- You Save:
-
$11.91
Genuine Bosch part
By: Bosch
Part Number: 00448806
Rotating spray arm distributes water across dish racks during wash cycles. Replace if clogged with mineral deposits, cracked, or damaged from impact.
Do-It-Yourself Stories from Customers like You
Spray arms were filled with calcium build up Sarah B. • Urbandale , IA • January 07, 2018
Dishes were not getting clean, I tried cleaning the original arms but after a number of tries I just wanted clean arms. Changing arms was extremely easy and the dishes are getting amazingly clean!
Read more
More
$26.24
- Compare At:
-
$31.49
- You Save:
-
$5.25
Genuine Bosch part
By: Bosch
Part Number: 00166637
Seals the detergent dispenser to prevent leaks and ensure proper release during wash cycles. Replace if detergent leaks or dispenser malfunctions.
Do-It-Yourself Stories from Customers like You
Soap dispenser not opening Matt L. • Morrisville , VT • January 19, 2018
Replaced dispenser.
It was hard to snap into place. You don't need to order separate gasket it comes with it.
Read more
More
$13.95
- Compare At:
-
$16.60
- You Save:
-
$2.65
Genuine Bosch part
By: Bosch
Part Number: 00425565
Replace your dishwasher's on/off button when cracked, broken, or stuck. Mounts to the control panel fascia for starting and stopping wash cycles.
Do-It-Yourself Stories from Customers like You
Broken fascia on Bosch dishwasher. Jerry's W. • Washougal , WA • November 19, 2017
The old fascia had broken and been torn off. I should have saved the buttons from it, but I didn't know that I'd be repairing it - I figured I would have to replace the unit. Well, money is tight, so I got the model number from the unit and looked up parts online. I couldn't find the exact model number on this site, but the picture of the fascia looked just like the picture in my manual, so I bought it, a handle strip, and a new set of buttons.
I pulled the stainless panel off the front, then...
Read more
More
$19.77
- Compare At:
-
$23.53
- You Save:
-
$3.76
Genuine Bosch part
By: Bosch
Part Number: 00166625
The Sealing is an OEM replacement part for Bosch brand dishwashers. Located on the perimeter of the small rinse aid compartment door, this resilient rubber piece forms an essential water-tight seal when the dispenser is closed.
Symptoms of a potentially problematic rinse aid door sealing include:
- Leakage or spills within the rinse aid reservoir
- Mineral deposits or residue build up inside the compartment
- Cracks, tears, or deformation of the sealing material
Causes of a faulty rinse aid door sealing can be repetitive opening/closing stress breaking down pliability long-term. Exposure to chemical vapors from the rinse aid may also degrade sealing properties.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Rinse aid door wouldn't close on Bosch dishwasher Ellen M. • Alamo , CA • June 28, 2019
Ordered rinse aid door w/ gasket to replace the broken one
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Bosch part
By: Bosch
Part Number: 00088403
2 clamps included.
Do-It-Yourself Stories from Customers like You
Needed a new dishwasher drain hose and the hose connecting piece that attaches to the garbage disposal John H. • Kennett Square , PA • September 26, 2016
Fixed it myself. Took only 15-20 minutes to remove the old hose and connect the new one. The parts were exactly what I needed to make the repair. The repair video on the website was very helpful.
Read more
More
$19.21
- Compare At:
-
$22.86
- You Save:
-
$3.65
Genuine Bosch part
By: Bosch
Part Number: 00165279
This turbidity sensor detects how clear the dishwasher's wash water is so the control can adjust cycle time, rinses, and water changes. Replacing a faulty sensor helps restore proper cleaning performance and normal cycle lengths.
- Monitors soil level/clarity of the wash water
- Signals the control to extend or shorten wash and rinse phases as needed
- Helps optimize water use while maintaining cleaning results
- Failure symptoms can include unusually long or short cycles, poor cleaning, repeated draining/refilling, or cycles that won't advance
What's included: 1 turbidity sensor assembly Install notes:
- Disconnect power and turn off the water supply before servicing
- Pull the dishwasher out as needed; access the sensor from the base area
- Place a towel to catch residual water; release the locking tab or twist-lock, unplug the connector, and install the new sensor fully seated and locked
- Restore power/water and run a test cycle; check for leaks
Do-It-Yourself Stories from Customers like You
Washing cycle was getting longer and longer Donald W. • Avon , IN • August 21, 2020
Replaced the turbidity sensor. I watched the video on how to replace the sensor. It took me a little longer than what service rep. said. But I finely finished the repair and now my wife has been using the dishwasher for the past week. I kept checking for leaks but so far so good. Thank you Appliance Parts Pros for your help. I installed the sensor on 08/18/2020. Don
Read more
More
$50.95
- Compare At:
-
$61.14
- You Save:
-
$10.19
Genuine Bosch part
By: Bosch
Part Number: 00165281
Fix dishwasher not heating or running for hours. This NTC temperature sensor monitors water temp and prevents overheating. Moderate DIY repair with video.
Do-It-Yourself Stories from Customers like You
Bosch dishwasher not heating water or drying dishes machine cycled for 3+ hours Tom B. • Arcade , NY • July 05, 2015
Ordered new heater/thermostat piece.
Read more
More
$57.39
- Compare At:
-
$67.72
- You Save:
-
$10.33
Genuine Bosch part
By: Bosch
Part Number: 00432779
Structural frame that supports the dishwasher user interface and front fascia. Replace if cracked, warped, or broken clips cause the console to separate.
Do-It-Yourself Stories from Customers like You
Plastic control panel at top of Bosch dishwasher broke. Randall G. • Carlsbad , CA • March 23, 2020
Called ApplicancePartsPros and they immediately found the specific parts I needed for my Bosch model and shipped them across the US so I had them in just 3 days (all during the virus chaos)! On the website they provided a high-def, detailed video on exactly how to take it apart, install the new replacement panel, and put it back together. Easy and accurate. While I will never buy another Bosch, I will definitely use APP for all my future parts needs! Great customer service with Midwestern...
Read more
More
$56.34
- Compare At:
-
$67.04
- You Save:
-
$10.70
Genuine Bosch part
By: Bosch
Part Number: 00166635
Wax motor for detergent/rinse-aid dispenser.
Do-It-Yourself Stories from Customers like You
Soap dispenser door wouldn't open David H. • San Francisco , CA • May 15, 2015
Took door off, saw that dispenser linkage was ok, I could open and close by hand, so figured the wax motor or the wiring to it were most likely the problem. I took off the wax motor ( actuator) and ran 120 volts to it via jumper wires, and it did not move at all, so figured good chance that was the problem. Found part # on your site, received new one quickly from you, put it in and works great. Thanks.
Read more
More
$29.68
- Compare At:
-
$35.32
- You Save:
-
$5.64
Genuine Bosch part
By: Bosch
Part Number: 00166628
Detergent not dispensing during wash cycle? This actuator arm with spring releases the detergent cup at the right time. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Control panel was cracked. Janet C. • Loganville , GA • April 01, 2023
Ordered a replacement control panel and installed it according to the AppliancePartsPros.com YouTube video.
Read more
More
$10.63
- Compare At:
-
$12.76
- You Save:
-
$2.13
Genuine Bosch part
By: Bosch
Part Number: 00481957
Replacement silverware basket with handle for dishwasher lower rack. Holds utensils upright for better cleaning. Replaces cracked, broken, or missing baskets.
Do-It-Yourself Stories from Customers like You
I needed two parts for my dishwasher in my new condo Alexandra W. • South Portland , ME • August 30, 2019
Found the parts online at your site. The parts were delivered in 2 days. Both parts fit perfectly. Thank you!!
Read more
More
$58.95
- Compare At:
-
$70.74
- You Save:
-
$11.79
Genuine Bosch part
By: Bosch
Part Number: 00165280
Circular sealing gasket creating watertight joints between dishwasher components. Replace when flattened or cracked to prevent leaks. Confirm fit by model.
More
$12.59
- Compare At:
-
$14.86
- You Save:
-
$2.27
Genuine Bosch part
By: Bosch
Part Number: 00151866
Seals the NTC temperature sensor port in your dishwasher to prevent leaks and ensure accurate temperature readings. Replace if leaking or worn. Verify fit with your model number before ordering.
More
$12.62
- Compare At:
-
$15.02
- You Save:
-
$2.40
Genuine Bosch part
By: Bosch
Part Number: 00165278
Seals the aqua sensor assembly to prevent water leaks and protect electronics. Replace if you notice leaks or sensor errors. Confirm fit with your model.
More
$12.95
- Compare At:
-
$15.28
- You Save:
-
$2.33
Genuine Bosch part
By: Bosch
Part Number: 00171596
Support strap that cushions and secures the dishwasher circulation motor, stabilizing the motor assembly to reduce vibration and help maintain alignment for steadier, quieter operation. Designed for circulation motors with softer bearings. What it does:
- Cushions and supports the circulation motor to limit movement and vibration and reduce motor noise.
- Secures the motor assembly to the tub/chassis to maintain proper clearance and fit.
- Helps prevent undue stress on motor bearings and mounting points that can cause premature wear.
- Commonly replaced when the strap is cracked, stretched, or no longer holds the motor firmly in place.
What's included: One support strap for the circulation motor. Install notes:
- Disconnect power and water supply before servicing; follow all safety and OEM service instructions.
- Remove access panels and any obstructing components to reach the circulation motor as required.
- Replace using the original mounting hardware; inspect motor mounts and bearings while accessible.
- Reassemble and run a short test cycle to confirm reduced vibration/noise and proper motor operation.
More
$5.57
- Compare At:
-
$6.68
- You Save:
-
$1.11