Bosch Dishwasher SHE4402UC Parts
Genuine Bosch part
By: Bosch
Part Number: 00166637
Seals the detergent dispenser to prevent leaks and ensure proper release during wash cycles. Replace if detergent leaks or dispenser malfunctions.
Do-It-Yourself Stories from Customers like You
Soap dispenser not opening Matt L. • Morrisville , VT • January 19, 2018
Replaced dispenser.
It was hard to snap into place. You don't need to order separate gasket it comes with it.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Bosch part
By: Bosch
Part Number: 00361113
Hose, with o - ring, shu (uc/12 & above)
This Sump to Float Hose is an OEM part for Bosch Dishwashers. It functions to carry water from the dishwasher sump to the float assembly. Continuous water flow and exposure to detergents can lead to wear or damage over time.
What Causes a Bad Sump to Float Hose:
Exposure to chemicals and hot water, along with wear from water flow, can cause the hose to degrade or develop cracks.
Symptoms of a Bad Sump to Float Hose:
- Water leakage around the dishwasher
- Incomplete or interrupted washing cycles
- Visible cracks or damage to the hose
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Do-It-Yourself Stories from Customers like You
Low water pressure / arms not spinning Wilbur C. • Washington , DC • October 13, 2014
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread.
Six pointers.
1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is...
Read more
More
$15.71
- Compare At:
-
$18.69
- You Save:
-
$2.98
Genuine Bosch part
By: Bosch
Part Number: 00498927
The Hinge Lever (RH) is an OEM component specifically designed for Bosch dishwashers. This right-hand lever is a part of the dishwasher door hinge assembly, working to open and close the door during each use.
Causes of a bad hinge lever can include wear and fatigue over thousands of opening and closing cycles. Damage can also potentially occur from any impact or denting of the door surface near the lever mechanism.
Symptoms of an ineffective hinge lever include:
- The dishwasher door sagging or becoming misaligned
- Difficulty fully opening or closing the door
- Loud squeaks or grinding noises coming from the hinges
- The door potentially detach from the hinge if broken
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Do-It-Yourself Stories from Customers like You
I accidentally wrenched the door hinge assembly on install breaking the little plastic hinge bushing John W. • Moline , IL • September 10, 2017
Ordered the full hinge piece and an extra bushing. Was able just to slide the dishwasher forward a bit, lift the right side hinge off its seat and pop in the new bushing without disassembling. Fixed! I am retaining the full hinge piece in case of any future door incident but suspect I will never need it
Read more
More
$27.95
- Compare At:
-
$33.26
- You Save:
-
$5.31
Genuine Bosch part
By: Bosch
Part Number: 00498928
Left-hand hinge lever for dishwasher doors. Assists door opening and closing through pivoting motion. Replace if cracked, broken, or damaged from overextension.
Do-It-Yourself Stories from Customers like You
Dishwasher hinge damage from kid stepping on door and leak at door. Leonardo M. • Novato , CA • May 30, 2020
Replacement of hinges and door seal.
Read more
More
$28.95
- Compare At:
-
$34.16
- You Save:
-
$5.21
Genuine Bosch part
By: Bosch
Part Number: 00676960
Fix a dishwasher that won't complete cycles or runs indefinitely with this control board. Controls all wash cycles and functions. 30-minute repair.
This part fixes the following symptoms
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
Stuck in 01 and wouldn't pump out & finish and shut off Harvey D. • Madison , CT • September 02, 2017
I ORDERED A NEW CONTROLLER BOARD. THE DIRECTIONS SHOWED HOW TO UNCLIP THE OLD BOARD BUT THE FASTENERS WERE ON THE LEFT SIDE NOT THE BOTTOM AS INDICATED ON THE REPAIR INSTRUCTIONS. AFTER REASSEMBLY THE DISHWASHER FUNCTIONED AS NEW. THNKS FOR THE INSIGHT.
Read more
More
$229.95
- Compare At:
-
$275.94
- You Save:
-
$45.99
Genuine Bosch part
By: Bosch
Part Number: 00166625
The Sealing is an OEM replacement part for Bosch brand dishwashers. Located on the perimeter of the small rinse aid compartment door, this resilient rubber piece forms an essential water-tight seal when the dispenser is closed.
Symptoms of a potentially problematic rinse aid door sealing include:
- Leakage or spills within the rinse aid reservoir
- Mineral deposits or residue build up inside the compartment
- Cracks, tears, or deformation of the sealing material
Causes of a faulty rinse aid door sealing can be repetitive opening/closing stress breaking down pliability long-term. Exposure to chemical vapors from the rinse aid may also degrade sealing properties.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Rinse aid door wouldn't close on Bosch dishwasher Ellen M. • Alamo , CA • June 28, 2019
Ordered rinse aid door w/ gasket to replace the broken one
Read more
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Genuine Bosch part
By: Bosch
Part Number: 00088403
2 clamps included.
Do-It-Yourself Stories from Customers like You
Needed a new dishwasher drain hose and the hose connecting piece that attaches to the garbage disposal John H. • Kennett Square , PA • September 26, 2016
Fixed it myself. Took only 15-20 minutes to remove the old hose and connect the new one. The parts were exactly what I needed to make the repair. The repair video on the website was very helpful.
Read more
More
$19.21
- Compare At:
-
$22.67
- You Save:
-
$3.46
Genuine Bosch part
By: Bosch
Part Number: 00165263
Plastic cover that protects the drain pump mechanism from debris. Replace if cracked, broken, or tabs are bent preventing proper seal during drain cycles.
Do-It-Yourself Stories from Customers like You
No spray during wash cycle pump impeller was broken. Robert K. • Cazenovia , NY • February 22, 2019
Watched AppliancePartsPros video, disassembled the dishwasher and replace impeller and seals.
Read more
More
$12.16
- Compare At:
-
$12.92
- You Save:
-
$0.76
Genuine Bosch part
By: Bosch
Part Number: 00423896
This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.
- Secures the toe-kick or lower access panel to the base/frame
- Restores proper fit when the original screw is lost or damaged
- Helps reduce panel rattles and vibration
- Maintains correct alignment and clearance at the bottom edge
What's included: One M4 x 8 screw Install notes:
- Disconnect power before servicing; also shut off the water supply
- Support the panel and align holes before threading the screw
- Start by hand to avoid cross-threading; tighten snugly—do not overtighten
- Verify size matches the original; replace matching hardware together if required by your model
Do-It-Yourself Stories from Customers like You
I fell backwards & dishwasher door was open i won the battle! i have the bruises & bent hinges to prove it Kathleen O. • West Chester , PA • July 22, 2017
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros.
Read more
More
$12.16
- Compare At:
-
$13.38
- You Save:
-
$1.22
Genuine Bosch part
By: Bosch
Part Number: 00165281
Fix dishwasher not heating or running for hours. This NTC temperature sensor monitors water temp and prevents overheating. Moderate DIY repair with video.
Do-It-Yourself Stories from Customers like You
Bosch dishwasher not heating water or drying dishes machine cycled for 3+ hours Tom B. • Arcade , NY • July 05, 2015
Ordered new heater/thermostat piece.
Read more
More
$93.89
- Compare At:
-
$103.28
- You Save:
-
$9.39
Genuine Bosch part
By: Bosch
Part Number: 00165279
This turbidity sensor detects how clear the dishwasher's wash water is so the control can adjust cycle time, rinses, and water changes. Replacing a faulty sensor helps restore proper cleaning performance and normal cycle lengths.
- Monitors soil level/clarity of the wash water
- Signals the control to extend or shorten wash and rinse phases as needed
- Helps optimize water use while maintaining cleaning results
- Failure symptoms can include unusually long or short cycles, poor cleaning, repeated draining/refilling, or cycles that won't advance
What's included: 1 turbidity sensor assembly Install notes:
- Disconnect power and turn off the water supply before servicing
- Pull the dishwasher out as needed; access the sensor from the base area
- Place a towel to catch residual water; release the locking tab or twist-lock, unplug the connector, and install the new sensor fully seated and locked
- Restore power/water and run a test cycle; check for leaks
Do-It-Yourself Stories from Customers like You
Washing cycle was getting longer and longer Donald W. • Avon , IN • August 21, 2020
Replaced the turbidity sensor. I watched the video on how to replace the sensor. It took me a little longer than what service rep. said. But I finely finished the repair and now my wife has been using the dishwasher for the past week. I kept checking for leaks but so far so good. Thank you Appliance Parts Pros for your help. I installed the sensor on 08/18/2020. Don
Read more
More
$50.95
- Compare At:
-
$60.63
- You Save:
-
$9.68
Genuine Bosch part
By: Bosch
Part Number: 00350321
Replacement water feed tube that delivers water to the upper spray arm in your dishwasher. Replace if cracked, split at seams, or leaking due to wear.
Do-It-Yourself Stories from Customers like You
Dishes were not getting clean Dorman P. • Ponte Vedra Beach , FL • October 18, 2014
After we saw that progressively our dishes were not getting clean we investigated the condition of the spray arms and this upper feed tube assembly. We found a huge crack on the side of this piece and new not enough water was getting to the arms. We also noticed a build up of soap and lime. So we ran a cycle of vinegar and sprayed the filters and arms with lime-off-sprayed them out with a air hose "completely". Many of the small pieces of lime will clog the holes in the spray arms. Attached the...
Read more
More
$81.39
- Compare At:
-
$96.04
- You Save:
-
$14.65
Genuine Bosch part
By: Bosch
Part Number: 00604771
Push-button cap for dishwasher control panels. Replaces broken, cracked, or missing buttons to restore control functionality and panel appearance.
Do-It-Yourself Stories from Customers like You
Cracked facia panel David U. • Lemont , IL • February 29, 2020
Removed 10 Star Screws to get the door cover off and the fascia panel snapped off. Inserted the 6 buttons and the door handle into the facia panel prior to snapping it in place. Screwed the door cover back in place and the job was done. The facia has two tabs that need to be inserted into the door. Be careful not to crack them as they seem fragile. The first facia panel I ordered arrived with with one of those tabs cracked off.
Read more
More
$14.73
- Compare At:
-
$17.38
- You Save:
-
$2.65
Genuine Bosch part
By: Bosch
Part Number: 00263833
Fix a dishwasher that won't fill, overfills, or leaks from the base. Water inlet valve controls flow into the tub. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Horrible smell when running a cycle Aaron H. • Los Angeles , CA • January 13, 2017
Bacteria buildup in the venting assembly and drain hose. Replaced them and it's back to normal
Read more
More
$150.95
- Compare At:
-
$181.14
- You Save:
-
$30.19
Genuine Bosch part
By: Bosch
Part Number: 00165331
O-ring seal prevents leaks between dishwasher components. Replace when you notice water drips or moisture buildup. Confirm fit with your model number.
Do-It-Yourself Stories from Customers like You
We had water that wouldn't completely drain from the dishwaser Melanie D. • Syracuse , UT • June 05, 2015
WE replaced the drain pump and it still wouldn't drain sometimes. Finally we realized that the drain hose wasn't the correct bosch hose and the rubber was starting to bend and kink where it went through the hole to under the sink.So we bought the drain hose and replaced.
Read more
More
$13.95
- Compare At:
-
$16.46
- You Save:
-
$2.51
Genuine Bosch part
By: Bosch
Part Number: 00496099
The Water Inlet Fill Hose is an OEM part for Bosch dishwashers. This part is responsible for safely and efficiently connecting the dishwasher to your home's water supply, ensuring that water flows into the dishwasher at the correct pressure and volume for optimal cleaning performance.
Over time, the Water Inlet Fill Hose can become susceptible to wear and tear, leaks and blockages.
Symptoms indicating the need for a new Water Inlet Fill Hose include:
- Water pooling around the dishwasher base, pointing to a potential leak in the hose.
- The dishwasher not filling with water properly, or filling very slowly, suggesting a blockage or damage to the hose.
- A visible inspection reveals cracks, bulges, or signs of corrosion on the hose connectors.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak. James P. • Coconut Creek , FL • February 06, 2023
Replaced the Water Inlet Valve and Drain Hose.
Read more
More
$25.60
- Compare At:
-
$30.72
- You Save:
-
$5.12