Kenmore Refrigerator 106.54786801 (10654786801, 106 54786801) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.95
- Compare At:
-
$21.36
- You Save:
-
$3.41
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2305204
Fix ice melting in the bin or ice chute door not closing properly. This dispenser door support bracket mounts the flapper for a proper seal. 20-30 min repair.
Do-It-Yourself Stories from Customers like You
Replaced 2 broken parts saved fridge. Roger M. • Ravenna , OH • June 17, 2023
Replaced the 2 parts that had broken (due to the wrong plastic selection by Kenmore IMO.
The motor needed to be re-clocked but this video https://youtu.be/QK8C8rxbkhc gave the information needed.
Between AppliancePartsPros.com and youtube I have rebuilt this fridge (water valve, Ice maker, Auger gearbox and ice shute door)
Probably could do the job in about 30 minutes now that I know how and exactly what needs to be done. Only needed the pliers to turn the motor shaft
Read more
More
$48.46
- Compare At:
-
$57.67
- You Save:
-
$9.21
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281163
Replacement screw for securing panels, brackets, and internal components. Replaces missing, stripped, or damaged fasteners to restore proper fit.
Do-It-Yourself Stories from Customers like You
Whirlpool wtw5000dw1 top loader door would not lock, spin cycle would not function John C. • Cornelia , GA • December 24, 2021
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2305242
This door bracket connector links the door bracket to its mating linkage in select refrigerator door assemblies. Replacing a worn or broken connector restores a solid connection so the door operates smoothly and stays properly aligned. What it does:
- Couples the door bracket to the hinge/actuator linkage to maintain alignment
- Helps ensure smooth door opening and closing
- Supports proper door sealing to reduce gaps or misalignment
- Replace if cracked, broken, or missing; common symptoms include a loose, clicking, or misaligned door
What's included: 1 connector Install notes:
- Disconnect power before servicing; support the door as needed to prevent strain on hinges
- Remove the relevant bracket/cover to access the connector; note the connector's orientation
- Transfer and reuse existing screws/fasteners
- After installation, check door alignment and gasket contact all around
Do-It-Yourself Stories from Customers like You
The ice chute door would not close Carol C. • Charlotte , NC • May 05, 2019
I chose to replace all the involved parts since everything was 12 years old. My parts were exactly what I needed. It was easy to take apart the ice chute mechanism and replace with the new parts. It works great!!
Read more
More
$53.21
- Compare At:
-
$63.32
- You Save:
-
$10.11
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489464
This is a replacement screw designed to work with a wide range of household appliances. It is used for many purposes in these appliances, from holding body panels together to securing electronics into control boards. However, screws are subject to damage through corrosion, impact, and improper installation/removal. In most cases, the primary damage to this screw is through corrosion – it may become rusted or corroded in place, depending on the appliance and the maintenance provided during its lifespan. The screw may also be stripped or rounded due to improper removal or installation. If the screw is damaged, lost, or corroded in place, it will need to be replaced. In most cases, removal will require nothing more than a Phillips head screwdriver or the appropriately sized socket with a ratchet. However, if the screw is damaged, it may require a tap set to remove it from its mounting location. Note that this is a genuine OEM replacement screw made from durable, high-quality metal, and is sold individually. It fits Whirlpool, Maytag, Roper, Estate, Amana, Crosley, and Thermador appliances. It is used in over 150 machines, ranging from washers and dryers to air conditioners.
Do-It-Yourself Stories from Customers like You
Cover unit in back of refrigerator need to be replaced Lawrence T. • Catalina , AZ • March 20, 2016
VERY EASY TO REPLACED OLD COVER-UNIT NEW COVER-UNIT.
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392899
Touch-up paint for appliances. Covers chips, scratches, and worn areas on range tops, refrigerators, and other appliances. Includes brush applicator.
Do-It-Yourself Stories from Customers like You
Lack of accurate control on 2 electric range burners Jeff D. • Neenah , WI • April 09, 2016
Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job.
The fix only took about 15 minutes because I was prepared after watching the video.
Read more
More
$18.23
- Compare At:
-
$21.88
- You Save:
-
$3.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WP1119007
Flat spacer for refrigerator door hinges. Maintains proper clearance between hinge and door for smooth operation and tight seal. Replace if worn or missing.
Do-It-Yourself Stories from Customers like You
Broken drive on door dispenser for ice maker Richard H. • Bartlett , TN • March 07, 2016
My LG electric dryer stopped drying the other day and I searched on line for suggestions on what may have caused it to stop working. I came across AppliancePartsPros.com and quickly found some of the most common issues with my LG dryer. The problems were listed in the order of most common occurrence, and had extremely helpful and detailed instructions on how to not only diagnose the problem, they also showed exactly how to access and repair the issue. Unfortunately, it was late on a Thursday...
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198587
Molded housing that shields the infrared emitter in your refrigerator's ice level optics system. Replace if cracked, broken, or missing to protect the board.
Do-It-Yourself Stories from Customers like You
Ice maker not making ice Frank C. • Carmel , NY • April 19, 2015
Your video was perfect without it I would of never been able to repair my ice maker
Read more
More
$54.25
- Compare At:
-
$65.10
- You Save:
-
$10.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2171157
Replace a cracked, broken, or missing refrigerator trivet shelf insert. Adds a usable storage level inside compartments to keep items organized.
Do-It-Yourself Stories from Customers like You
I broke a freezer door shelf while helping my son and daughter in law clean for a move Vicki P. • San Antonio , TX • July 15, 2017
Just ordered a new part and put it in.
Read more
More
$55.30
- Compare At:
-
$66.36
- You Save:
-
$11.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400065
This replacement cabinet screw secures panels, brackets, and ducts in Whirlpool-built appliances so components stay aligned and secure. Replacing missing or stripped hardware helps reduce vibration, rattling, and gaps that can affect performance.
- Fastens panels, brackets, and internal components in the appliance cabinet
- Helps maintain proper alignment and reduce vibration or rattling noises
- Restores a tight fit where original hardware is missing, damaged, or stripped
- Typical symptoms: loose paneling, buzzing/rattling sounds, or parts that won't stay fastened
What's included: One screw. Install notes:
- Disconnect power; for gas models, also shut off the gas supply
- Replace one fastener at a time to preserve alignment and match to the original hardware
- Use the correct driver; start threads by hand to avoid cross-threading
- Do not overtighten into sheet metal
Do-It-Yourself Stories from Customers like You
Ice dispenser was skipping so not dispensing ice Del H. • Midlothian , TX • September 03, 2018
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489235
Plain washer distributes load under fasteners in refrigerator assemblies. Replace when worn or missing to secure brackets, hinges, and mounts. Verify fit.
Do-It-Yourself Stories from Customers like You
Broken drive on door dispenser for ice maker Richard H. • Bartlett , TN • March 07, 2016
My LG electric dryer stopped drying the other day and I searched on line for suggestions on what may have caused it to stop working. I came across AppliancePartsPros.com and quickly found some of the most common issues with my LG dryer. The problems were listed in the order of most common occurrence, and had extremely helpful and detailed instructions on how to not only diagnose the problem, they also showed exactly how to access and repair the issue. Unfortunately, it was late on a Thursday...
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10205978
This ice door motor drives the dispenser's ice chute door, opening to let ice out and closing to seal the chute. Replacing a worn motor restores proper door movement and helps reduce warm-air leaks and frost around the dispenser.
- Opens and closes the dispenser ice door (flapper) during use
- Helps keep the ice chute sealed between dispenses to limit frost and moisture
- Failure symptoms can include the ice door not opening/closing, frost or condensation in the chute, air leakage at the dispenser, or clicking from the dispenser area
What's included: 1 ice door motor Installation notes:
- Unplug the refrigerator and shut off water before servicing
- Remove the dispenser front panel/trim and control to access the ice door mechanism
- Note wire positions; install the new motor, transferring any levers/arms as configured on your model
- Restore power and test ice door operation before reassembly
Do-It-Yourself Stories from Customers like You
Ice maker door wouldn’t open Mickey W. • Ponca City , OK • April 20, 2020
Talked to a service rep. and he helped me diagnose what was needed.
Read more
More
$49.51
- Compare At:
-
$59.41
- You Save:
-
$9.90
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2179243
Replace your refrigerator's decorative handle trim panel when cracked, chipped, faded, or missing. Covers handle mounting area for a clean finish.
Do-It-Yourself Stories from Customers like You
Broken snack tray shelf and cracked snack pan and meat pan. Heather D. • Valley Park , MO • February 19, 2021
Just removed the broken items and replaced new ones all in under five minutes.
Read more
More
$55.95
- Compare At:
-
$66.48
- You Save:
-
$10.53
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212365
Fix noisy operation or poor ice dispensing caused by a worn drive sleeve coupling. This connector transmits motor rotation in your refrigerator's drive assembly.
Do-It-Yourself Stories from Customers like You
The ice maker would not shut off making ice even when the bin was full Kevin M. • Citrus Heights , CA • November 17, 2017
Spoke with a representive that diagnosed the problem as a bad control board. After receiving the new control board, I was able to easily perform the replacement by watching the step-by-step instructional video on the website. It is now functioning normally.
Read more
More
$21.61
- Compare At:
-
$25.93
- You Save:
-
$4.32
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2260503B
Color: Black
Do-It-Yourself Stories from Customers like You
Water in the door stopped working Patrick M. • Midwest City , OK • December 19, 2019
I had the water filter holder replaced to fix the problem with the water for the door and the ice maker. The holder did not come with the cover for the release button for the filter. I ordered a replacement cover (Button) for the filter release. The cover fits over the release lever and was easily snapped onto the lever. It took more time to unpack the button from the packaging then it did to install it onto the filter housing. I don't understand why this part wasn't included with the new...
Read more
More
$46.95
- Compare At:
-
$56.89
- You Save:
-
$9.94
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195914
Mounts in the dispenser to secure the ice housing assembly. Keeps the chute and door aligned for smooth dispensing. Replace if cracked, broken, or worn.
Do-It-Yourself Stories from Customers like You
Dark bits of something embedded in the ice cubes and a crack in one of the plastic pieces of the ice maker Brett G. • Willow Park , TX • October 09, 2017
Replaced the ice tray and motor mount plate. While I was there I replaced the thermostat also. New parts arrived in a day and a half.
Read more
More
$53.95
- Compare At:
-
$64.02
- You Save:
-
$10.07