Kenmore Refrigerator 106.56646500 (10656646500, 106 56646500) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11233072
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
- Fastens panels, brackets, covers, or internal parts to the chassis or frame
- Helps maintain alignment and support, reducing rattle, vibration, or looseness
- Replaces missing or damaged screws that have backed out, broken, or stripped
- Restores secure mounting after service when original hardware is lost
What's included: 1 screw Install notes:
- Disconnect power; shut off water or gas supplies before servicing
- Use the correct driver; start threads by hand to avoid cross-threading
- Match length and thread to the original location; do not substitute with longer hardware
- Tighten snugly; do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Bake element broken on jenn air model s125 downdraft slide in range Patricia D. • Raleigh , NC • May 02, 2015
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process.
To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -...
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Size: 8 x 1/2 ab.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152859
Color: Black
Do-It-Yourself Stories from Customers like You
Refrigerator water dispenser stopped working Carlos R. • Houston , TX • September 19, 2014
The water dispenser stopped working on my Sears Kenmore (Whirlpool) side-by-side refrigerator and after much research on the web I purchased the parts that commonly failed for this condition. I should have first taken the dispenser assembly apart but I didn't--it looked a little too intimidating to do twice. As it turns out, what actually broke was the plastic assembly that holds the water actuator switch in place so the dispenser lever could not strike it. I was able to secure it in place...
Read more
More
$51.28
- Compare At:
-
$61.02
- You Save:
-
$9.74
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2174267
The Wire Shelf is an OEM part for Whirlpool refrigerators. It is designed specifically for the freezer compartment of the refrigerator. It is constructed with wire material to support the weight of various frozen food items without bending or sagging.
Causes of a faulty freezer shelf can include wear and tear over time, damage from heavy or improperly placed items, or bending due to excessive weight.
Symptoms of a bad freezer shelf may include:
- Sagging or bending of the shelf surface
- Instability or wobbling when placing or accessing items on the shelf
- Reduced storage space or difficulty in organizing frozen food
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
I needed a new shelf for my freezer Michael G. • Toledo , OH • July 22, 2016
I ordered one from you.
Read more
More
$59.95
- Compare At:
-
$71.34
- You Save:
-
$11.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10250570
This cabinet roller assembly supports the refrigerator at the base and lets you roll the unit forward for cleaning or service. Replace a cracked or seized roller to restore smooth movement and a stable, level stance. What it does:
- Supports the refrigerator cabinet and helps maintain proper leveling
- Allows the unit to roll for easier cleaning and servicing
- Replaces worn, cracked, or seized rollers and damaged brackets
- Helps resolve wobbling, uneven stance, scraping noises, or difficulty moving the fridge
What's included:
- One complete cabinet roller assembly
Install notes:
- Disconnect power and turn off the water supply before servicing
- Protect flooring and use a second person or an appliance dolly to safely tilt or move the unit
- Remove mounting fasteners, swap the assembly in the original position, and reuse hardware if applicable
- After installation, level the refrigerator and verify doors close and seal properly
Do-It-Yourself Stories from Customers like You
The plastic left rear wheel was coming apart and needed replacing Gary H. • San Antonio , TX • June 11, 2016
I decided if one needed replacing I might as well both two--made sense to me. None were available locally so I ordered them on-line. Surprisingly they came sooner than I expected. I also found a video on the internet that clearly showed the procedure. The actual repairs took 15 minutes or less. One good suggestion from the video was to run the screw in and out of the wheel bracket before final mounting. The video also suggested putting something under the corner to eliminate tipping. The...
Read more
More
$27.95
- Compare At:
-
$33.26
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196483
The Shelf Stud is an OEM part for Whirlpool refrigerators. It serves as a support peg that holds the refrigerator shelves in place, ensuring they remain stable and properly positioned.
Causes of a bad shelf stud can include wear and tear from regular use, accidental impact that causes the stud to break, or repeated removal and reinstallation of shelves leading to loosening or damage.
Symptoms of a bad shelf stud include:
- Shelves not staying securely in place
- Shelves tilting or collapsing
- Visible cracks or damage to the stud
- Difficulty in inserting or removing shelves
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This is a rear stud with a screw. For the front stud with screw use part number W11223328. For studs with no screw use kit part number 4388538.
Do-It-Yourself Stories from Customers like You
Broken shelf and drawer. Regina M. • Yardley , PA • November 10, 2017
Myself
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155013
Clip for bottom grill. If your original clip is riveted, order screw WP489478.
Do-It-Yourself Stories from Customers like You
Leaking water filter housing and broken grill cover clips Carl H. • Strongsville , OH • December 04, 2016
Ordered parts, watched the videos on your website. Very simple.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2171713
This ice compartment door closes off the ice storage area inside the freezer, helping contain cold air and keep ice clean. Replace a cracked or warped door to restore a proper seal and easy access to the bin.
- Covers the ice compartment opening to help maintain temperature around the ice bin
- Hinged panel provides convenient access to the ice container
- Helps minimize frost and moisture at the compartment opening
- Common signs it's needed: cracked/missing door, broken hinge tabs, won't stay closed, frost buildup, or ice clumping near the opening
What's included: 1 ice compartment door Install notes:
- Disconnect power to the refrigerator before servicing
- Remove screws, pins, or clips securing the old door; note hinge orientation
- Transfer any reusable hinge pins, latches, or trim from the original if required
- Install and align the new door; confirm smooth operation and a tight closure
Do-It-Yourself Stories from Customers like You
Noisy water pipes in house when dispensing water slowy and squirting water dispensing Roger S. • Harker Heights , TX • August 18, 2016
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,...
Read more
More
$53.32
- Compare At:
-
$63.45
- You Save:
-
$10.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387911
This push-button door switch senses when your refrigerator door opens and closes to control the interior light. Replace a worn or stuck switch to restore reliable lighting and proper on/off operation when the door moves. What it does:
- Turns the interior light on when the door opens and off when it closes
- Common fix for a light that won't turn on with the door open
- Resolves lights that stay on continuously with the door closed
- Addresses intermittent lighting from a sticking or damaged plunger
What's included:
Install notes:
- Disconnect power to the refrigerator before servicing
- Carefully pry the old switch from the liner; protect the surface to avoid damage
- Transfer wires to the new switch one at a time to maintain correct connections
- Press the new switch fully into place and restore power to test operation
Do-It-Yourself Stories from Customers like You
A failed freezer door switch was causing the fridge to display that the door was open when it was not this caused it to beep at random Kara H. • Charleston , SC • March 08, 2016
We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: 4210463RW
This flexible, narrow brush reaches under and behind the cabinet to sweep dust and lint from condenser coils and vents. Cleaning built-up debris helps restore airflow and support proper cooling performance.
- Sweeps dust, lint, and pet hair from condenser coils and ventilation areas
- Flexible reach helps access coils beneath or behind the appliance
- Aids proper heat dissipation by clearing airflow paths
- Helpful when coils are visibly dirty, cooling seems weak, or the unit runs longer than usual
What's included: 1 condenser coil cleaning brush
- Unplug or disconnect power before cleaning
- Remove the toe grille or rear access panel if needed to access coils
- Brush gently along the coil fins; avoid bending fins or damaging tubing
- Vacuum or wipe up loosened debris before replacing any panels and restoring power
Do-It-Yourself Stories from Customers like You
Failed condenser motor John F. • New Palestine , IN • February 29, 2016
Replaced bad condenser motor
Read more
More
$28.25
- Compare At:
-
$33.62
- You Save:
-
$5.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2186494W
White. For black order WP2186494B. For biscuit order WP2186494T.
Do-It-Yourself Stories from Customers like You
Light switch Truman P. • Athens , AL • December 15, 2015
Replaced with new one from your website. I love the website because it shows you how to fix your problem before you get started. I
Read more
More
$46.95
- Compare At:
-
$55.40
- You Save:
-
$8.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206629B
Color: Black
Do-It-Yourself Stories from Customers like You
Broken can Rayniero S. • Rockledge , FL • July 10, 2016
Ordered the parts, took door off the refrigerator. Removed all parts and replace with new parts. Took me about 15 minutes to complete.
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2179234
This meat pan trim is the front handle piece for your refrigerator's deli/meat drawer. It restores a secure grip and clean, finished look so the drawer opens smoothly and stays attached to the pan.
- Attaches to the front edge of the meat/deli pan and serves as the drawer handle and trim
- Helps keep the pan properly seated for smooth in-and-out operation
- Replaces cracked, broken, loose, or missing trim/handle
- Can resolve issues like a hard-to-open drawer or a pan that won't stay in place
What's included: One meat pan trim/handle Install notes:
- Disconnect power; remove the meat pan and place it on a protected surface
- Remove the damaged trim and clean the pan's mating surfaces
- Align the new trim with the pan lip; press or slide it on until fully seated
- Reinstall the drawer and verify smooth operation before restoring power
Do-It-Yourself Stories from Customers like You
Broken drawers and shelf Andria J. • Staunton , VA • March 03, 2019
Replaced rather than purchasing a new refrigerator. Installation was very easy. I was a truly impressed as to how quickly my purchase arrived. It all arrived within 3 days of purchase. Thanks
Will keep checking back for shelves that were out of stock when I made my purchase.
My refrigerator looks almost new again.
Read more
More
$47.95
- Compare At:
-
$56.58
- You Save:
-
$8.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206670T
Used to prevent water from overflowing from the dispenser on the freezer door. Color: Biscuit. It measures about 10 inches wide by 3 inches deep. For black order WP2206670B. For white order WP2206670W.
Do-It-Yourself Stories from Customers like You
Noisy fan and grungy ice/water handles Andrew B. • Port Jefferson Station , NY • June 26, 2015
Your videos showing disassembly were invaluable. New parts fit perfect. Took awhile to clean surrounding parts before reinstalling new parts... but now 10 year old fridge looks like new!
Read more
More
$56.95
- Compare At:
-
$67.20
- You Save:
-
$10.25