Kenmore Refrigerator 106.57372700 (10657372700, 106 57372700) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 2159083
The Refrigerator Door Gasket (BLK) is an OEM part for Whirlpool refrigerators. This black gasket is designed to create a tight seal around the refrigerator door, preventing warm air from entering and cool air from escaping. The gasket is black in color and measures approximately 19 ¼” wide by 62" tall.
Causes of a bad door gasket can include wear and tear from regular use, damage from cleaning chemicals or sharp objects, or warping due to temperature fluctuations. Over time, the gasket may lose its flexibility and sealing ability.
Symptoms of a bad door gasket include:
- The refrigerator door not closing properly
- Visible cracks or tears in the gasket
- Condensation or frost buildup around the door seal
- Increased energy bills due to the refrigerator working harder to maintain temperature
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator door gasket lost its magnet hold Elizabeth C. • Punta Gorda , FL • September 04, 2015
Purchase a new one and installed per your video on Youtube. Great and easy.
Read more
More
$140.45
- Compare At:
-
$169.59
- You Save:
-
$29.14
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188874
The Condenser Fan Motor is an OEM part for Whirlpool refrigerators. This motor is responsible for powering the fan that cools the condenser coils, which helps dissipate heat from the refrigerator. Proper functioning of the condenser fan motor is crucial for maintaining the efficiency and cooling performance of the refrigerator.
Causes of a bad condenser fan motor can include wear and tear from regular use, dust and debris buildup, or electrical failures. A faulty fan motor can lead to overheating of the condenser coils, which can cause the refrigerator to operate inefficiently or stop cooling altogether.
Symptoms of a bad Condenser Fan Motor include:
- The refrigerator running warmer than usual
- The condenser coils being hot to the touch
- The fan not spinning or making unusual noises
- Increased energy consumption
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Note: Due to a manufacturing change, if your original fan motor has a 3-terminal connector, order fan motor W10124096 which includes an adapter harness to convert to the new 4-terminal connector.
Do-It-Yourself Stories from Customers like You
Fan noise Richard W. • Plano , TX • May 29, 2017
Removed the back cover to access the fan area. Clean the area with brush and vac first. Unplugged the Refrigerator. Used a socket set with 1/4" socket. Had an extended and a standard socket. Removed the condensate plastic drain from the bottom of the refrigerator to have more access to the fan. Unplugged the fan motor. Removed the two screws holding the fan in place. Removed the fan unit from the condenser side of the bracket. Place new fan on the fan and installed exactly the way I removed the...
Read more
More
$84.79
- Compare At:
-
$109.20
- You Save:
-
$24.41
Genuine Whirlpool part
By: Whirlpool
Part Number: W10864399
The Glass Shelf is an OEM part for Whirlpool refrigerators. It provides a sturdy and transparent surface within the refrigerator for storing food items, allowing for easy organization and visibility. The glass measures about 16.5 by 13 inches.
Common causes of a bad glass shelf include cracks or breaks due to heavy loads or accidental impacts, as well as edge chipping from repeated use.
Symptoms of a bad glass shelf include:
- Cracks or shattered glass
- Chipped or broken edges
- Unstable or wobbly placement within the refrigerator
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My ice bucket was cracked and my crisper and meat pan were broken Wendell Y. • Bellwood , IL • April 18, 2015
I took apart the old bucket with a screwdriver and put the new one with no problems.
Read more
More
$122.65
- Compare At:
-
$145.95
- You Save:
-
$23.30
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201537
The Dispenser Water Tube Kit is an OEM part for Whirlpool refrigerators, designed to replace or repair the water line that connects to the refrigerator's water dispenser.
Causes of these symptoms can vary from normal wear and tear, mineral buildup from hard water leading to blockages or damage, or accidental damage during cleaning or moving of the refrigerator.
Symptoms of needing the Dispenser Water Tube Kit include:
- Leakage or dripping from the water dispenser area
- A decrease in water flow or no water flow to the dispenser or ice maker
- Noticeable damage or kinks in the existing water tube that restrict water flow
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
I needed to replace the water reservoir tube and freezer tube also Ken C. • Williamsburg , VA • January 28, 2016
I watched the videos for both jobs, which were excellent and "spot on" for the repair jobs.It didn't take me an hour to replace both lines. Keep up the good work on helping us repair and save money doing our own work.
Ken
Read more
More
$67.34
- Compare At:
-
$80.13
- You Save:
-
$12.79
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388736
The Ice Dispenser Drum is an OEM replacement part for Whirlpool refrigerators. This drum is located in the ice maker assembly and is responsible for dispensing ice when activated. It rotates to push ice through the chute and into your glass or container.
Causes of a bad ice dispenser drum include wear and tear from regular use, damage from ice jams, or breakage due to accidental mishandling. Accumulation of ice and debris can also cause the drum to malfunction.
Symptoms of a bad ice dispenser drum include:
- Ice not dispensing properly
- Grinding or clicking noises during operation
- Inconsistent ice output
- The dispenser becoming jammed frequently
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Ice maker dispenses too little ice
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
Broken ice dispenser drum Betty H. • Tahlequah , OK • April 13, 2014
Plastic drum was broken and wasn't pushing the ice through the crusher teeth. Received my part pronto and made the repair. Was an easy fix, took about 15 min from start to finish. Everything working very good now. ( : Thanks for getting the parts to me so fast. I will definitely remember Appliance Pro if I need parts in the future.
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W11342242
The Ice Level Arm is an OEM part for Whirlpool refrigerators. It is an component of the ice maker, responsible for sensing the ice level in the ice bin and controlling the ice production cycle. When the ice bin reaches capacity, the ice level arm signals the ice maker to stop producing ice, ensuring efficient operation.
You should replace this ice level arm if it becomes faulty. Causes of a bad ice level arm can include mechanical wear and tear, accidental damage, or issues with the connection to the ice maker mechanism.
Symptoms of a bad Ice Level Arm include:
- Continuous ice production, leading to overfilling
- The ice maker not producing ice even when the bin is empty
- The ice level arm not moving freely or appearing stuck
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The ice guard came off the icemaker and got tangled up and twisted in the bottom of the tray without the guard we had way too much ice being made Sandy S. • Yantis , TX • August 22, 2015
We bought a new ice guard and installed it. It is working really good now.
Read more
More
$45.95
- Compare At:
-
$54.22
- You Save:
-
$8.27
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.
Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.
Symptoms indicating the need for Appliance Touchup Paint include:
- Visible scratches or chips on the appliance surface
- Areas of exposed metal prone to rust
- Blemishes that affect the overall aesthetic of the appliance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$12.55
- Compare At:
-
$15.06
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249
The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production.
Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.
Symptoms of a bad Screw include:
- Loose or dislodged components within the ice maker assembly.
- Inconsistent or halted ice production due to components shifting.
- Unusual noises emanating from the ice maker as a result of loose parts.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2323198
The Heater is an OEM part for Whirlpool refrigerators. This part prevents frost buildup by heating the evaporator coils during the defrost cycle. This part ensures that air flows freely over the coils, improving the efficiency of the cooling system and maintaining the refrigerator at the optimal temperature.
Causes of a bad heater can include electrical failures, such as a blown fuse or a faulty wiring connection, or physical damage to the heater element itself.
Symptoms of a bad Heater include:
- Frost buildup on the evaporator coils
- The refrigerator and freezer not maintaining the desired temperatures
- Increased energy consumption as the refrigerator works harder to cool
- Unusual noises from the refrigerator as the fan hits frost buildup
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Whirlpool refrigerator evaporator frozen up with ice along with warm refrigerator compartment Wesley W. • Millbrook , AL • February 26, 2015
Tried to put refrigerator in defrost mode and defrost would not initiate. Checked the bi-metal and heater, both tested good. Replaced the ADC board and refrigerator went in to defrost. problem solved.
Read more
More
$48.95
- Compare At:
-
$59.96
- You Save:
-
$11.01
Genuine Whirlpool part
By: Whirlpool
Part Number: W10823511
The Ice Maker Water Line is an OEM part for Whirlpool refrigerators. It supplies water from the household plumbing to the ice maker, ensuring a consistent and reliable production of ice cubes. This kit includes a 1/4-inch plastic water line that is approximately 72 inches long. The tubing will need to be cut to match the desired length.
Causes of a bad water line can include wear and tear from prolonged use, kinks or bends restricting water flow, or leaks due to punctures or cracks. A compromised water line can result in inadequate ice production or water leaks.
Symptoms of a bad ice maker water line include:
- Reduced or no ice production
- Leaking water from the refrigerator
- Visible cracks or damage to the water line
- Ice cubes that are smaller than usual
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Not dispensing water
-
Ice maker not making ice
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
Ice maker fill tube leak Chad M. • Hollywood , FL • May 16, 2015
I watched your how-to video. It explained the repair PERFECTLY.
It was an easy repair and the video was very detailed. It took the guesswork out of the repair.
I was done in 5 minutes.
thanks for taking the time to post videos for your parts. I'll shop here again.
Best Regards,
Chad M
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: 2159075
The Refrigerator Door Gasket (Beige) is an OEM replacement part specifically designed for Whirlpool-brand refrigerators. The gasket is responsible for preventing warm air and moisture from entering the refrigerator when doors close. The gasket measures approximately 19 ¼” wide x 62" tall.
Causes of a gasket issue can include cracking and degradation due to repeated compression over many years of use. Sections may lose elasticity and no longer seal tightly.
Symptoms of a bad gasket include:
- High energy costs as the system works to maintain proper cooling
- Warm, humid interior environment allowing food decay
- Visible air leaks around gasket edges when doors are shut
This part is also compatible with Maytag, KitchenAid, Jenn-Air, and other brands.
Do-It-Yourself Stories from Customers like You
The seal on the door of the refigerator was damaged also the hinge cap needed replacing as it was cracked Michael S. • Fredericksburg , VA • January 20, 2016
I took the new seal out of it's packaging and used a blowdryer on low heat to soften up the seal so that the crease from shipping (it was folded to ship) disappeared. Next I took the refrigerator door off, removed the old seal, & cleaned the area where the new seal would be applied. Following the video on the Appliance Pro Parts website, I re-installed the new seal and put the door back on. Last step was to snap on the new hinge cap I ordered. The video online was easy to follow and this...
Read more
More
$160.72
- Compare At:
-
$189.65
- You Save:
-
$28.93
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2260518W
The Water Filter Cap is an OEM replacement part for Whirlpool and KitchenAid refrigerators. It seals the water filter housing assembly and provides the attachment point for filter cartridges.
Symptoms of a faulty cap include:
- Loose, improper, or missing seal placement
- Water leaks from uncontained filtration area
- Inability to install or remove filters easily
Causes can involve wear to threaded plastic from normal filter changes. Prolonged exposure to water pressure may degrade sealing integrity over time.
This genuine Whirlpool replacement is also compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper refrigerator models.
Do-It-Yourself Stories from Customers like You
Both lugs on refrigerator water filter cap broke apparently due to age induced brittleness would not pull water filter out of refrigerator William F. • Birmingham , AL • June 01, 2016
Replaced filter cap with new one. The minor challenge was to find a method of pulling the filter out of refrigerator (which is normally done by pulling on the filler cap. The filter was recessed to far into the refrigerator for me to be able attach the new cap. I had to find another tactic to remove the filter. The solution was to look at the replacement filter to notice where two slots were located at the end of the filter. I then used a paint can opener (found at most paint stores) to slip...
Read more
More
$31.95
- Compare At:
-
$38.34
- You Save:
-
$6.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 2159074
The Freezer Door Gasket is an OEM replacement part for Whirlpool refrigerators. It creates a tight insulating seal around the perimeter of the freezer door opening.
The gasket helps maintain consistent sub-freezing temperatures inside by preventing cold air loss.
Causes relate to natural compression fatigue over time, cracks developing with use, or accidental slicing/tears from sharp edges within the freezer.
Symptoms of a compromised gasket include:
- Frost or ice buildup near the door threshold from leaks
- Difficulty keeping foods frozen solid in compartments near the door
- The cold air felt escaping around door edges when closed
It is also compatible for use in Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy water pipes in house when dispensing water slowy and squirting water dispensing Roger S. • Harker Heights , TX • August 18, 2016
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,...
Read more
More
$156.95
- Compare At:
-
$186.77
- You Save:
-
$29.82
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10312300
The Ice Container Assembly is an OEM part for Whirlpool refrigerators. This assembly includes the ice bin, where ice is collected, and often features integrated mechanisms or augers for dispensing ice through the refrigerator's door.
Causes of a bad Ice Container Assembly can include cracks or damage to the bin, which can lead to ice leaks or accumulation in the freezer; wear or malfunction of the dispensing mechanism, affecting its ability to deliver ice.
Symptoms of a bad Ice Container Assembly include:
- Difficulty in dispensing ice or complete failure to dispense
- Ice accumulation outside of the bin, indicating a potential crack or gap
- Excessive frost or ice buildup restricting the assembly's movement
- Noticeable cracks or damage to the ice container itself
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Note: This is the complete horizontal ice dispenser bucket assembly with a crusher. It fits 25 and 27-cubic-foot refrigerator models. For 20 cubic foot models order WP2209778. For 22 cubic foot models order WPW10312301.
Do-It-Yourself Stories from Customers like You
Plastic parts breaking into drink when dispenceing ice Morris H. • Walhalla , SC • September 03, 2014
Simple fix purchased complete assembly slid old one out and new one in transferring ice was hardest part
Read more
More
$229.29
- Compare At:
-
$275.15
- You Save:
-
$45.86
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2256126
The Water Reservoir is an OEM part for Whirlpool refrigerators. It stores and chills water before it is dispensed through the refrigerator's water dispenser. This component ensures that you have a steady supply of cold water available directly from your fridge.
Common causes of a bad water reservoir include cracks or leaks from regular use, exposure to extreme temperatures, or blockages from mineral deposits.
Symptoms of a bad water reservoir include:
- Water leaks inside the refrigerator
- The water dispenser not dispensing properly
- Unusual tastes or odors in the water
- Visible cracks or damage to the reservoir
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Replaced of water filter then discovered a long slimy clear algae on purging system Michel L. • Rockledge , FL • March 26, 2017
After watching installation videos on each felt I could pull it off and ordered and received replacement water reservoir and water dispenser tube assembly. Reservoir installation went off without a hitch outside of the added step of the need to remove the entire main in waterline assy in order to access the connectors which also were not as represented in video, in that they were not the press-to-release type but standard threaded compression types.
Water Dispenser tube/spout assembly was much...
Read more
More
$94.22
- Compare At:
-
$113.06
- You Save:
-
$18.84
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59