Kenmore Refrigerator 106.57792702 (10657792702, 106 57792702) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2252130
The Dispenser Motor is an OEM part for Whirlpool refrigerators. It is a crucial component that powers and operates the water and ice dispensing system, allowing users to conveniently access chilled water, cubed ice, or crushed ice from the refrigerator door.
Causes of a bad dispenser motor may include electrical failures, mechanical wear and tear, or physical damage from impact or moisture.
Symptoms of a faulty Dispenser Motor include:
- No water or ice being dispensed from the refrigerator door
- Intermittent or inconsistent water or ice dispensing
- Leaks or drips from the dispenser area
- Unusual noises or grinding sounds when attempting to dispense
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Ice dispenser motor bad Scott P. • Dacula , GA • March 27, 2021
I received my new part in about 3-4 days. Part was exact match for my existing motor. After watching the installation video on this website I was able to garner the rudimentary directions to replace the motor. The video did not match the exact fridge I had. My fridge did not have the access panel on the interior of the freezer. I had to remove the two screws at the water ice dispenser tray on the outside and slide that unit off the front. Before removing the motor, open the freezer and remove...
Read more
More
$132.31
- Compare At:
-
$157.45
- You Save:
-
$25.14
Genuine Whirlpool part
By: Whirlpool
Part Number: 2159075
The Refrigerator Door Gasket (Beige) is an OEM replacement part specifically designed for Whirlpool-brand refrigerators. The gasket is responsible for preventing warm air and moisture from entering the refrigerator when doors close. The gasket measures approximately 19 ¼” wide x 62" tall.
Causes of a gasket issue can include cracking and degradation due to repeated compression over many years of use. Sections may lose elasticity and no longer seal tightly.
Symptoms of a bad gasket include:
- High energy costs as the system works to maintain proper cooling
- Warm, humid interior environment allowing food decay
- Visible air leaks around gasket edges when doors are shut
This part is also compatible with Maytag, KitchenAid, Jenn-Air, and other brands.
Do-It-Yourself Stories from Customers like You
The seal on the door of the refigerator was damaged also the hinge cap needed replacing as it was cracked Michael S. • Fredericksburg , VA • January 20, 2016
I took the new seal out of it's packaging and used a blowdryer on low heat to soften up the seal so that the crease from shipping (it was folded to ship) disappeared. Next I took the refrigerator door off, removed the old seal, & cleaned the area where the new seal would be applied. Following the video on the Appliance Pro Parts website, I re-installed the new seal and put the door back on. Last step was to snap on the new hinge cap I ordered. The video online was easy to follow and this...
Read more
More
$174.54
- Compare At:
-
$205.96
- You Save:
-
$31.42
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2260518W
Replacement cap that seals the water filter housing and attaches to filter cartridges. Needed when cap is cracked, broken, or missing notches prevent secure fit.
Do-It-Yourself Stories from Customers like You
Cap notches one one side broken Jerry R. • Toano , VA • December 09, 2014
Replaced cap
Read more
More
$34.75
- Compare At:
-
$41.00
- You Save:
-
$6.25
Genuine Whirlpool part
By: Whirlpool
Part Number: 2159074
Creates an airtight seal around your freezer door to maintain consistent temperatures and prevent cold air loss. Replace if torn, cracked, or loose.
Do-It-Yourself Stories from Customers like You
Noisy water pipes in house when dispensing water slowy and squirting water dispensing Roger S. • Harker Heights , TX • August 18, 2016
Replaced Case Water Filter assembly DA81-05883A. Please read my post entirely before starting. I completed all the tasks that I could without having to disconnect the refrigerator since it was full of food. First I removed the panel on top of the refrigerator that covers the water line that feeds the dispenser. Do not disconnect any electrical connections or the water line at this time. Remove the panel from the back bottom of the refrigerator that covers the compressor and water valve,...
Read more
More
$170.62
- Compare At:
-
$203.04
- You Save:
-
$32.42
Genuine Whirlpool part
By: Whirlpool
Part Number: W11497323
Clear plastic snack pan drawer for refrigerator storage compartment. Replace if cracked, scratched, clouded, or broken. Slides into existing tracks.
Do-It-Yourself Stories from Customers like You
Broken drawer/no longer available Lynn P. • Sardinia , OH • June 25, 2016
I searched the web for a replacement drawer to no avail. Once I reached this site I was pretty discouraged when your site also said my drawer was no longer available. A suggestion for a different replacement drawer that MAY work was my only option. I purchased the drawer with the understanding that it could be returned if it didn't fit. To my surprise it came in two days and fit perfectly. I am thrilled every time I open the fridge. I am VERY pleased with this purchase and would...
Read more
More
$132.52
- Compare At:
-
$157.70
- You Save:
-
$25.18
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198633
Protective cover for the ice maker's infrared emitter sensor in the freezer compartment. Replace if cracked, broken, or missing to shield the sensor.
Do-It-Yourself Stories from Customers like You
Broken emitter cover from ice maker replacement Jeff K. • Derry , NH • February 03, 2015
Followed the video you provided.
Read more
More
$32.64
- Compare At:
-
$39.17
- You Save:
-
$6.53
Genuine Whirlpool part
By: Whirlpool
Part Number: W10852956
The Spring is an OEM part for Whirlpool refrigerators. It is a small but important internal part that applies pressure to dispense cubed or crushed ice from the refrigerator door. The spring is located within the ice dispenser mechanism and works with a lever to push ice out through the dispenser chute upon activation.
Causes of a bad spring can include wear and tear over time, putting undue pressure on the dispenser by jamming items into the chute, or damage from excessive force applied during dispensing.
Symptoms of a bad spring include:
- Ice cubes or crushed ice becoming jammed or failing to dispense properly
- The ice dispenser failing to push ice fully through the chute
- Excessive pressure needs to be applied to activate the dispenser
- Ice cubes are dispensed in irregular sizes or clumps rather than individual pieces
This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice dispenser was skipping so not dispensing ice Del H. • Midlothian , TX • September 03, 2018
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed...
Read more
More
$13.47
- Compare At:
-
$16.03
- You Save:
-
$2.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10190929
The Ice Mold is an OEM part for Whirlpool refrigerators. This component forms the ice cubes in the icemaker, shaping the water into cubes as it freezes. The ice mold is crucial for the efficient production of ice, ensuring that each cube is properly formed and easily released into the ice bucket.
You should replace the ice mold if it shows signs of wear or damage. Causes of a bad ice mold can include mineral buildup from hard water, physical damage to the mold surface, or malfunctioning heating elements that prevent ice from releasing properly.
Symptoms of a bad Ice Mold include:
- Ice cubes not forming correctly or being irregular in shape
- Ice cubes sticking to the mold and not dispensing
- The icemaker not producing ice at all
- Leaks around the icemaker area
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice forming in the ice cube bin Bill J. • Scottsdale , AZ • December 13, 2014
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level.
With guidance from the video, I removed the icemaker from the wall of the freezer. The...
Read more
More
$162.27
- Compare At:
-
$193.10
- You Save:
-
$30.83
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
$7.48
- Compare At:
-
$8.83
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2176759
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
Do-It-Yourself Stories from Customers like You
Freezer cold but refrigerator warm. Michael D. • Windham , NH • May 04, 2018
I could not be happier with my Appliance Parts Pros experience. I googled my symptoms, and the 2nd result was a video from Appliance Parts Pros describing what the problem might be and exactly how to fix it. There was such a close match between my symptoms and the description that I ordered the parts --- with a 365 day return policy, my risk was limited.
Almost too good to be true, the parts arrived next business day! I took it slow (about an hour) to install the new evaporator fan motor,...
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10159839
Fix leaking water or ice maker not filling? Water inlet valve controls flow to ice maker and dispenser. DIY repair takes 10-20 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
Ice maker overflowing with water causing spillage all throughout freezer Tamra C. • Chandler , AZ • April 09, 2015
Replaced inlet valve.
Read more
More
$181.95
- Compare At:
-
$216.52
- You Save:
-
$34.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2212370
The Coupling is an OEM replacement part for Whirlpool French door bottom-mount refrigerators equipped with an interior automatic icemaker. As an internal part, this coupling connects the auger motor to the ice mold assembly, allowing the motor to transmit rotational force during the ice harvest cycle.
Causes of a damaged coupling can include regular wear from years of exposure to changing temperatures inside the refrigerator. Mineral deposits accumulating on surfaces over many harvest seasons have the potential to deteriorate plastic material. Physical obstructions lodged in the icemaker mechanism could potentially bend or crack the coupling.
Symptoms of a failing coupling involve:
- Inability of the auger motor to engage fully and eject frozen cubes
- Grinding or knocking sounds emitting from the icemaker
- Restricted or incomplete ice harvest that leaves cubes in molds
This OEM replacement is compatible with some Kenmore Elite French door models.
Do-It-Yourself Stories from Customers like You
Ice dispenser was skipping so not dispensing ice Del H. • Midlothian , TX • September 03, 2018
The problem was that the motor coupler & shaft had a tiny bit of rust at their union. With the weight of the ice bin it rusted in the lowest position. This didn't allow the motor coupler to float on the shaft. There is a spring inside the shaft that pushes up on the motor coupler keeping it engaged in the ice bin coupler above. This coupler in turn rotates the auger in the bin to dispense the ice. I removed the motor coupler & shaft, tapped the coupler loose and filed off the rust. This allowed...
Read more
More
$15.32
- Compare At:
-
$18.38
- You Save:
-
$3.06
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281164
The Screw is an OEM part for Whirlpool appliances, designed to provide secure fastening in a variety of locations within the appliance. This versatile component is crucial for assembly and maintenance tasks, ensuring that parts are held together tightly and function as intended. Whether it's securing panels, attaching components, or facilitating repairs, this screw is engineered to meet the specifications of Whirlpool appliances, offering durability and reliability.
Causes of screw issues can include normal wear and tear, over-tightening, which may strip the threads, or corrosion that weakens the screw's hold.
Symptoms of a bad or missing Screw include:
- Loose components or panels within the appliance
- Unusual noises due to parts not being securely fastened
- Difficulty in assembling or disassembling parts for repairs or maintenance
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Auger broke into and would not feed ice into the crusher Ronald C. • Indian Trail , NC • April 02, 2016
Replaced the auger, blade and screw (bottom)
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10184813
Ice dispenser door won't open or ice won't drop? This refrigerator ice dispenser motor powers the chute door mechanism. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Ice door was intermittent for awhile and finally quit opening ice backed up in the chute and plugged it Keith W. • Las Vegas , NV • February 21, 2016
Reviewed the AppliancePartsPros.com site and decided that the most likely suspect was the ice motor. I ordered one and got it FAST! I removed the water ice tray in the bottom of the Ice/water kiosk which exposed two phillips screws which I removed. The front panel came off by lifting upward and unplugging it. The ice door motor was visible near the top of the opening. I removed the hex head screws with a 1/4" nut driver so the ice door assembly was free. The core control board was hidden...
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489497
Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.
Do-It-Yourself Stories from Customers like You
Missing hinges to hold the door up Sandra C. • Gardena , CA • June 05, 2016
Found the parts in the diagram of my fridge and simply installed it very easy
Read more
More
$11.78
- Compare At:
-
$14.02
- You Save:
-
$2.24
Genuine Whirlpool part
By: Whirlpool
Part Number: 4387478
Refrigerator light won't turn on? This light socket kit restores interior lighting when bulbs won't work. Simple DIY repair with video guide.
Do-It-Yourself Stories from Customers like You
The refrigerator light didn't work Maria V. • Sonoma , CA • November 21, 2014
I saw your video on you tube and it seems very easy to do it my self, so I ordered the parts and I did it my self. It was very easy. Thank you for sharing with us on how to did it. One more thing, the parts arrived on the time they said it would come.
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31