Kenmore Refrigerator 106.58143802 (10658143802, 106 58143802) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10156818
The Fan Blade is an OEM part for Whirlpool refrigerators. It is essential for circulating air throughout the refrigerator, ensuring that the temperature remains consistent and the cooling process is efficient. The fan blade helps distribute cold air from the evaporator coils to different parts of the refrigerator and freezer compartments, maintaining an even temperature throughout.
Over time, the fan blade can become damaged due to wear and tear, obstruction by debris, or impact from moving items within the refrigerator. If the fan blade is cracked, broken, or loose, it will not be able to circulate air effectively, leading to cooling issues and potential food spoilage.
Symptoms of a bad fan blade include:
- Unusual noises coming from the refrigerator
- Inconsistent cooling or warm spots within the compartments
- The refrigerator running more frequently or for longer periods
- Frost buildup in the freezer
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
One of the fan blades broke off the condenser fan Kevin C. • College Station , TX • April 03, 2017
I pulled the refrigerator out, removed the back panel, disconnected the fan motor. I did not know how hard or easy it would be to remove the fan from the motor shaft so I removed the motor with the fan attached and then removed and replaced the fan. This would not be necessary if you have a lot of strength, but if you need leverage to push the fan down on the shaft you might want to disconnect and remove the motor fan assembly too. After replacing the motor assembly and reconnecting I tested by...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
Touch-up paint for covering scratches, chips, and minor blemishes on appliance exteriors. Restores appearance and protects surfaces when finish is damaged.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8201537
Replaces the water tube that runs through your refrigerator door to the dispenser. Needed when the original tube is cracked, broken, or leaking.
Do-It-Yourself Stories from Customers like You
I needed to replace the water reservoir tube and freezer tube also Ken C. • Williamsburg , VA • January 28, 2016
I watched the videos for both jobs, which were excellent and "spot on" for the repair jobs.It didn't take me an hour to replace both lines. Keep up the good work on helping us repair and save money doing our own work.
Ken
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249
Mounting screw for refrigerator ice maker assembly. Secures components to maintain structural integrity. Replace if lost, stripped, or corroded.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198633
Protective cover for the ice maker's infrared emitter sensor in the freezer compartment. Replace if cracked, broken, or missing to shield the sensor.
Do-It-Yourself Stories from Customers like You
Broken emitter cover from ice maker replacement Jeff K. • Derry , NH • February 03, 2015
Followed the video you provided.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2176759
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
Do-It-Yourself Stories from Customers like You
Ice maker quit and frig was warmer then usual Marc A. • Santa Cruz , CA • November 11, 2018
I noticed Ice maker Quit for the third time in 15 years so I decided to buy another Ice maker, I installed it and NO ice still?? Well I went after the other problem thinking if it does not get cold enough maybe ice maker won’t work. I ordered Defrost Switch, Heater and Evaporator Fan just to be safe. I replaced all three, the fan was noisy, the heater OHM’d ok but I replaced it as did the defrost switch, I put it back together, the Freezer got to 0 degrees and the frig got to 38 degrees so I...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2195051
The Dispenser Arm Strain Relief is an OEM replacement part for Whirlpool side-by-side refrigerators. It connects the water and ice dispenser arm to the fridge cabinet, absorbing tension during use.
Causes of a bad strain relief involve wear and flexing fatigue of the plastic over extensive dispensing cycles. Exposure to moisture or liquid damage inside the fridge liner may prematurely degrade connecting parts as well.
Symptoms of a bad strain relief include:
- Cracks, splits, or tears in the relieving plastic material
- Dispenser arm separation from the cabinet opening
- Missing pieces that compromised structural integrity
- Difficulty accessing or using the refrigerator's water/ice functions
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerator models.
Do-It-Yourself Stories from Customers like You
In door water dispensor Brian C. • Pve , CA • June 27, 2016
With the help of the fantastic videos provided on the web site for each replacement part, it was extremely easy to complete the repair
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP488729
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
Do-It-Yourself Stories from Customers like You
The lint catch was broken Misti P. • Spokane , WA • January 18, 2019
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10822681
Ice maker not filling or water leaking? The water inlet valve controls water flow to your ice maker. Common DIY repair, typically 15-20 minutes.
Do-It-Yourself Stories from Customers like You
Leaking ice maker in freezer causing ice block & icicles Jan W. • Sanibel , FL • October 14, 2015
Ordered water inlet valve, watched repair video and installed it very quickly. Totally solved problem. Defrosted freezer and working great now.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2188919
Ice won't dispense or auger not turning? This drive shaft holder secures the ice maker shaft for proper rotation. Easy 10-minute DIY fix with video guide.
Do-It-Yourself Stories from Customers like You
Ice would not dispense Annie V. • Missouri City , TX • February 23, 2016
My refrigerator was not dispensing ice. I could hear the motor activating but noticed the ice auger was not turning. My old drive shaft was stripped on both ends. Video was very helpful and it was an easy fix for someone with little handyman experience.
Received my order much faster than expected! The parts arrived the next day and paid for the standard shipping charge. I live in Texas.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10307490
Horizontal metal rod that secures glass shelf panels inside your refrigerator door. Replace if broken, bent, or missing to prevent shelf slippage.
Do-It-Yourself Stories from Customers like You
Broken part Elaine K. • Elgin , IL • August 12, 2019
Cut piece to fit
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10276792
The Water Reservoir Tubing is an OEM replacement part for Whirlpool refrigerators. It is a flexible plastic tubing that replaces the water reservoir and holds the water for the ice maker and dispenser.
Causes can include cracks from heat or cold exposure over time, punctures from sharp edges during installation, or deterioration of plastic tubing that impacts integrity.
Symptoms of bad water reservoir tubing include:
- Inaccurate or inconsistent ice production
- Leaks or water spills near the reservoir or ice maker
- Kinks or ruptures in the tubing that obstruct water flow
- Mineral buildup that clogs or restricts the line
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Note: As per manufacture this is no longer a tank. The tank style has been updated with coiled tubing.
Do-It-Yourself Stories from Customers like You
Water in refrigerator dispenser smelled like rotten eggs Dale L. • Phoenix , AZ • July 29, 2018
Replaced water reservoir that had become contaminated with ??? Also had to replace the water filter, because the water contaminated it also. Cost was about $150, for two filters and the reservoir. The first filter was replaced because I did not know the reservoir was contaminated, and no water was coming out of the dispenser. Since the water in the ice maker did not come through the reservoir, there was no smell or contamination there. The new filter enabled water to come through the dispenser,...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489497
Factory screw secures panels, brackets, and internal components in refrigerators and freezers. Replace missing, rusted, or stripped screws for secure fit.
Do-It-Yourself Stories from Customers like You
Missing hinges to hold the door up Sandra C. • Gardena , CA • June 05, 2016
Found the parts in the diagram of my fridge and simply installed it very easy
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196003
Refrigerator not cooling consistently or compressor short cycling? This thermostat capillary tube shield protects temperature sensing. DIY repair.
Do-It-Yourself Stories from Customers like You
The unit was not keeping suitable temperature if you tapped the cold control(thermostat) it would come on for one complete cylce Thomas J. • Destin , FL • February 12, 2016
Replacing the cold control solved the problem. While i was at it i also replaced the defrost timer and installed a new ice door.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281164
The Screw is an OEM part for Whirlpool appliances, designed to provide secure fastening in a variety of locations within the appliance. This versatile component is crucial for assembly and maintenance tasks, ensuring that parts are held together tightly and function as intended. Whether it's securing panels, attaching components, or facilitating repairs, this screw is engineered to meet the specifications of Whirlpool appliances, offering durability and reliability.
Causes of screw issues can include normal wear and tear, over-tightening, which may strip the threads, or corrosion that weakens the screw's hold.
Symptoms of a bad or missing Screw include:
- Loose components or panels within the appliance
- Unusual noises due to parts not being securely fastened
- Difficulty in assembling or disassembling parts for repairs or maintenance
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Lower ice bin broken Dennis B. • Wichita Falls , TX • March 30, 2020
Easy to remove the metal parts from the old bin. The only problem was that the screw that holds the adapter has red thread locker and screwdriver rounded off the head of the screw. Drilled the screw and heated the screw to loosen the thread locker and used an ease out to remove the screw.
Read more
More