Kenmore Refrigerator 106.58149801 (10658149801, 106 58149801) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10250570
This cabinet roller assembly supports the refrigerator at the base and lets you roll the unit forward for cleaning or service. Replace a cracked or seized roller to restore smooth movement and a stable, level stance. What it does:
- Supports the refrigerator cabinet and helps maintain proper leveling
- Allows the unit to roll for easier cleaning and servicing
- Replaces worn, cracked, or seized rollers and damaged brackets
- Helps resolve wobbling, uneven stance, scraping noises, or difficulty moving the fridge
What's included:
- One complete cabinet roller assembly
Install notes:
- Disconnect power and turn off the water supply before servicing
- Protect flooring and use a second person or an appliance dolly to safely tilt or move the unit
- Remove mounting fasteners, swap the assembly in the original position, and reuse hardware if applicable
- After installation, level the refrigerator and verify doors close and seal properly
Do-It-Yourself Stories from Customers like You
The plastic left rear wheel was coming apart and needed replacing Gary H. • San Antonio , TX • June 11, 2016
I decided if one needed replacing I might as well both two--made sense to me. None were available locally so I ordered them on-line. Surprisingly they came sooner than I expected. I also found a video on the internet that clearly showed the procedure. The actual repairs took 15 minutes or less. One good suggestion from the video was to run the screw in and out of the wheel bracket before final mounting. The video also suggested putting something under the corner to eliminate tipping. The...
Read more
More
$27.95
- Compare At:
-
$33.26
- You Save:
-
$5.31
Genuine Whirlpool part
By: Whirlpool
Part Number: W11778262
This cam-door is the small pivoting cam that helps a washer/dryer or laundry door latch and swing smoothly. Replacing a worn or broken cam restores proper door movement and helps the door close and seal reliably. What it does:
- Acts as the pivot/latch cam that guides the appliance door during opening and closing.
- Helps the door engage the latch and maintain correct alignment.
- Commonly used to stop a door from hanging, binding, or failing to stay closed.
- Can reduce door noise or catching caused by a damaged cam.
What's included: Includes: One cam-door. Install notes:
- Disconnect power (unplug or switch off breaker) before starting any repair.
- Support the door or cabinet panel during removal to prevent dropping or damage.
- Remove the door or access panel and replace the cam using basic hand tools; keep track of fasteners.
- After reassembly, check door operation and latch engagement before returning the appliance to service.
Do-It-Yourself Stories from Customers like You
Door clicking, door not closing easily Mike K. • Broadview Heights , OH • January 27, 2020
Replaced both sets of door cams on my Kenmore Elite Refrigerator. The most important thing to know is that you DO NOT have to remove the doors from the refrigerator to replace BOTH sets of cams. You just have to remove the lower grill which is a snap fit (I also turned off the water and unplugged the unit). My fridge has an ice and water dispenser where the water and electrical lines go through the cams on the left side. Be sure to order the correct parts as the cam holes on the freezer side...
Read more
More
$6.75
- Compare At:
-
$7.50
- You Save:
-
$0.75
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2155013
Clip for bottom grill. If your original clip is riveted, order screw WP489478.
Do-It-Yourself Stories from Customers like You
Leaking water filter housing and broken grill cover clips Carl H. • Strongsville , OH • December 04, 2016
Ordered parts, watched the videos on your website. Very simple.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2196483
The Shelf Stud is an OEM part for Whirlpool refrigerators. It serves as a support peg that holds the refrigerator shelves in place, ensuring they remain stable and properly positioned.
Causes of a bad shelf stud can include wear and tear from regular use, accidental impact that causes the stud to break, or repeated removal and reinstallation of shelves leading to loosening or damage.
Symptoms of a bad shelf stud include:
- Shelves not staying securely in place
- Shelves tilting or collapsing
- Visible cracks or damage to the stud
- Difficulty in inserting or removing shelves
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This is a rear stud with a screw. For the front stud with screw use part number W11223328. For studs with no screw use kit part number 4388538.
Do-It-Yourself Stories from Customers like You
Broken shelf and drawer. Regina M. • Yardley , PA • November 10, 2017
Myself
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10159659
This is the lower refrigerator crisper drawer that slides into the fresh food compartment. It restores a smooth-sliding, intact bin for fruits and vegetables to help keep items organized and easy to access.
- Holds produce in the fresh food compartment; slides on existing rails
- Replaces cracked, warped, or missing crisper bins
- Can help when the drawer sticks, falls off the track, or won't stay seated
- Durable OEM fit for proper alignment with the shelf/rail system
What's included: One crisper pan (Microban). Install notes:
- Empty the bin and remove the glass/shelf above if needed for clearance
- Pull the old drawer straight out, lifting slightly to clear the tracks
- Align the new pan on the rails and slide in until fully seated
- Handle plastic carefully and avoid forcing against the shelf edges
Do-It-Yourself Stories from Customers like You
Cracked crisper drawer Pj W. • North Tonawanda , NY • February 17, 2015
Removed broken crisper drawer , had to remove a sliding humidity control slider that was snapped in, and another slide attatched to handle of drawer , my grandon did both for me and the new crisper pan was put in place
Delivery was 3 days , could of been quicker if I choose but it was not an emergency repair . It was package well also and best part the price was 25% lower than Sears !
Read more
More
$174.95
- Compare At:
-
$208.19
- You Save:
-
$33.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4387911
This push-button door switch senses when your refrigerator door opens and closes to control the interior light. Replace a worn or stuck switch to restore reliable lighting and proper on/off operation when the door moves. What it does:
- Turns the interior light on when the door opens and off when it closes
- Common fix for a light that won't turn on with the door open
- Resolves lights that stay on continuously with the door closed
- Addresses intermittent lighting from a sticking or damaged plunger
What's included:
Install notes:
- Disconnect power to the refrigerator before servicing
- Carefully pry the old switch from the liner; protect the surface to avoid damage
- Transfer wires to the new switch one at a time to maintain correct connections
- Press the new switch fully into place and restore power to test operation
Do-It-Yourself Stories from Customers like You
A failed freezer door switch was causing the fridge to display that the door was open when it was not this caused it to beep at random Kara H. • Charleston , SC • March 08, 2016
We actually were able to determine that one of the freezer switches was bad and taped it down for about 3 days. The beeping stopped. Our fridge has two freezer switches and one fridge side switch. I ordered all three from these guys. They were cheaper than Whirlpool by about $20 for parts and about $15 for shipping. The part numbers had superseded too many times to count, usually that doesn't matter but in this case it did. The new parts were just slightly bigger than the old parts AND...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152854
The Ice Lever is an OEM replacement part for Whirlpool refrigerators. Positioned within the ice dispenser assembly, the lever is activated when a glass or container is pushed against it, triggering the release of ice.
Color: Black
Causes of a bad ice lever include physical wear and tear due to frequent use, or breakage from mishandling or accidental impact. Additionally, buildup of ice or debris around the lever can lead to it malfunctioning.
Symptoms of a faulty ice lever include:
- Ice not dispensing properly
- Lever sticking or becoming difficult to press
- Lever being visibly cracked or broken
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator water dispenser stopped working Carlos R. • Houston , TX • September 19, 2014
The water dispenser stopped working on my Sears Kenmore (Whirlpool) side-by-side refrigerator and after much research on the web I purchased the parts that commonly failed for this condition. I should have first taken the dispenser assembly apart but I didn't--it looked a little too intimidating to do twice. As it turns out, what actually broke was the plastic assembly that holds the water actuator switch in place so the dispenser lever could not strike it. I was able to secure it in place...
Read more
More
$52.33
- Compare At:
-
$62.80
- You Save:
-
$10.47
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206629B
Color: Black
Do-It-Yourself Stories from Customers like You
Broken can Rayniero S. • Rockledge , FL • July 10, 2016
Ordered the parts, took door off the refrigerator. Removed all parts and replace with new parts. Took me about 15 minutes to complete.
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Whirlpool part
By: Whirlpool
Part Number: 72032
Bottle with brush. Color: Black. Size: 0.6 fl.oz.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$17.76
- Compare At:
-
$21.13
- You Save:
-
$3.37
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206671W
Color: white. Measures about 9 inches wide by 2-1/2 inches deep.
Do-It-Yourself Stories from Customers like You
Broken dispenser lever retainer ice guide and overflow grille Tony R. • Milford , DE • May 23, 2015
I watched the videos and made the repairs in a little over 5 minutes! It was great and if I ever need parts again I was use this site. I have told everybody about this site.
Read more
More
$51.27
- Compare At:
-
$61.52
- You Save:
-
$10.25
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10318960
Approximate measurement: 11.5" x 11"
Do-It-Yourself Stories from Customers like You
Wanted to add additional shelvng Wilma P. • Birmingham , AL • December 09, 2015
Ordered a shelf for the refrigerator and a shelf for the freeze compartment. Adding the shelf to each side was easy. Job completed. Parts were ordered on line, they arrived in 2 days.
Read more
More
$63.59
- Compare At:
-
$75.04
- You Save:
-
$11.45
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10143759
Do-It-Yourself Stories from Customers like You
Failed to cool due to hole/s in evaporator leaking freon Gerald L. • Myrtle Beach , SC • August 17, 2017
Ordered new Evaporator part and Drier from Appliance Pros. The part arrived earlier than expected and was properly packaged. I had both parts installed by a professional as they required a level of expertise above my capabilities. Works perfectly.
Read more
More
$28.23
- Compare At:
-
$33.59
- You Save:
-
$5.36
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10288153
This replacement screw fastens appliance panels, brackets, and internal components so everything stays aligned and rattle-free. Use it to replace stripped, corroded, or missing hardware and restore a solid, secure fit during repairs.
- Secures panels, brackets, covers, and assemblies in place
- Replaces damaged or missing hardware to maintain a firm hold
- Helps reduce vibration and rattling from loose fasteners
- Supports proper fit and alignment after service
What's included: 1 screw Install notes:
- Disconnect power and shut off water/gas (as applicable) before servicing
- Match to the original fastener and replace one at a time to keep alignment
- Start threads by hand to avoid cross-threading; do not overtighten, especially into plastic
- Repair threads or use the manufacturer-specified hardware for that location
Do-It-Yourself Stories from Customers like You
Shelf split in the middle and dropped door handle loose Lloyd W. • Arvada , CO • November 09, 2024
Replacement shelf fit easily, perfectly. Was going to swap out screw for door handle, but found it was now tight. Will hang on to replacement screw until handle becomes loose again.
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3196557
This replacement screw secures appliance panels and components so they stay tight and aligned during use. Replacing a missing or damaged screw restores a solid fit and helps eliminate rattles, loose trim, or shifting parts.
- Fastens brackets, panels, trim, or components to the appliance chassis
- Helps correct loose or missing hardware after vibration or service
- Replaces stripped, rusted, or broken screws
- Can reduce rattling noises or misaligned parts caused by missing fasteners
What's included: One screw Install notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Support the part being fastened; start threads by hand to avoid cross-threading
- Use the correct driver size; tighten snugly without overtightening
- Replace hardware with the exact part number to ensure proper fit
Do-It-Yourself Stories from Customers like You
Water dispenser was no longer working Kelly W. • Houston , TX • January 24, 2017
After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8281163
This replacement screw secures panels, brackets, and internal components within your appliance. Replacing a missing or damaged fastener restores a tight fit, reduces vibration and noise, and helps keep parts properly aligned during operation.
- Fastens panels, trim, brackets, or internal components to the chassis
- Maintains proper alignment and stability during normal use
- Replaces missing, rusted, or stripped hardware
- Common symptoms: loose or rattling panels, vibration, difficulty fastening, or a visibly missing screw
What's included: 1 screw Installation notes:
- Disconnect power; for gas appliances, also shut off the gas supply
- Match length and thread to the original; replace one-for-one in the same location
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- If the receiving hole is stripped, repair threads or replace the clip/nut before installing
Do-It-Yourself Stories from Customers like You
Whirlpool wtw5000dw1 top loader door would not lock, spin cycle would not function John C. • Cornelia , GA • December 24, 2021
Replaced door latch and switch. Parts are plastic so you must know what you are doing to avoid breaking new parts. Videos were hard to find for my model - eventually I found a video that addressed a different problem but required disassembly of a washer cabinet similar to mine. I removed the control panel using a putty knife and unplugged the wire to the latch switch. Then I remove 3 screws securing the washer's top panel to the back panel. Using a rubber mallet, I gently knocked the top panel...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10318952
Approximate measurement: 15" x 11"
Do-It-Yourself Stories from Customers like You
No problem just wanted an extra shelf Bob H. • Dayton , OH • January 30, 2015
Very nice sales representive, very helpful, polite, and very professional.., and super fast service. Ordered shelf and was on my door step in two days. I thought the price was high, but, then so is everything else these days. If the need arises, I will order again from this company.
Bob Hauff / Dayton, Ohio
Read more
More
$60.50
- Compare At:
-
$71.99
- You Save:
-
$11.49