Kenmore Refrigerator 106.58149801 (10658149801, 106 58149801) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11223328
This shelf support stud anchors a refrigerator shelf to the cabinet liner so it stays level and secure. Replace a cracked or missing stud to restore proper support and prevent shelves from tilting, slipping, or dropping.
- Locks into the liner wall to provide a mounting point for the shelf frame or bracket
- Keeps the shelf aligned and at the correct height
- Common symptoms: broken/missing stud, shelf won't sit flat, shelf sags or falls on one side
- Helps prevent items from sliding due to an unstable shelf
What's included: One shelf support stud Install notes:
- Disconnect power; remove the shelf and any items resting on it. Handle glass shelves carefully and consider wearing cut-resistant gloves.
- Remove the damaged stud (release the locking tab or twist out, depending on design).
- Insert the new stud into the existing hole until fully seated and locked.
- Reinstall the shelf and verify it sits level before reloading.
Do-It-Yourself Stories from Customers like You
Broken shelf and drawer. Regina M. • Yardley , PA • November 10, 2017
Myself
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Genuine Whirlpool part
By: Whirlpool
Part Number: 2159080
Color: Black
Do-It-Yourself Stories from Customers like You
Worn out freezer gasket Jeffrey T. • Norfolk , VA • February 18, 2020
Bought gasket from website, followed easy helpful video instructions, perfect fit.
Read more
More
$148.50
- Compare At:
-
$178.20
- You Save:
-
$29.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152858
Color: White
Do-It-Yourself Stories from Customers like You
The ice dispenser lever was cracked and did no longer trigger the dispensing of the ice Andrea M. • Honolulu , HI • March 01, 2015
I replaced the Ice Dispenser Lever. Since the replacement part is only available in white and my fridge is bone, I replaced also the Water Dispenser Lever, so it looks much better.
I followed the instructions in the video, which were very useful and very well done. My problem was that the refrigerator is a KitchenAid built-in, while the instructions were for a Whirlpool, so the removal of the faceplate was quite different from what was shown in the video and more difficult. Also there were some...
Read more
More
$53.33
- Compare At:
-
$64.00
- You Save:
-
$10.67
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2260518MG
The Water Filter Cap is an OEM replacement part for Whirlpool refrigerators. This component is a decorative cover that fits over the water filter, providing a neat and finished appearance to the filter housing area.
Color: Grey
Over time, the water filter cap can become damaged due to accidental impact, routine handling, or regular wear and tear.
Symptoms of a faulty water filter cap include:
- Difficulty in securely fitting the cap onto the water filter
- Cracks, discoloration, or missing pieces
- An unsightly internal refrigerator appearance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Had to push really hard on the ice and water pads to make them work Rachel J. • Chapel Hill , NC • January 03, 2020
I replaced the pads on my Kitchenaid side-by-side. I was able to order ones that looked exactly like the old ones. It was even easier than what I had seen in a YouTube video.
Read more
More
$47.95
- Compare At:
-
$57.54
- You Save:
-
$9.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 4388932
Adaptive Defrost Control Board
Do-It-Yourself Stories from Customers like You
The whirlpool side by side needed upgrade of control components William M. • Sunnyside , WA • February 06, 2017
The 20 year old unit still serves us well, looks good and has been kept in good repair. The condenser fan had stopped so I removed, cleaned and oiled that motor. The decision was made to make an upgrade to the evaporator motor and control units so that the appliance could reasonably be expected to have extended service life. The Ice maker module had been replaced 7 years ago. I ordered the parts and have made the upgrade for temperature controller and the defrost control. If you are in a...
Read more
More
$166.67
- Compare At:
-
$229.92
- You Save:
-
$63.25
Genuine Whirlpool part
By: Whirlpool
Part Number: W11496481
The Water Tube is an OEM component specifically designed for Whirlpool refrigerators. This 1/4" diameter water tube provides a pathway for water to flow through the refrigerator's internal components during operations like ice production.
Causes of a bad water tube can include cracks or defects from manufacturing, damage from impact or abrasion during shipping or installation, or wear over time from cycles of use.
Symptoms of a bad water tube include:
- Water leaks or drips inside the refrigerator
- Insufficient or slow water flow to components
- Abnormal sounds from water not flowing smoothly
- Failure of components dependent on water flow like the ice maker
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Water filter housing leaking H M. • Picayune , MS • August 18, 2015
Replaced filter housing, and both water tubes
Read more
More
$26.95
- Compare At:
-
$31.80
- You Save:
-
$4.85
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198661
This top coupling links two drive components in select washers to transfer rotation smoothly. Replacing a worn or stripped coupling restores consistent agitation/spin and can reduce slipping, rattling, or grinding noises from the drive area. What it does:
- Connects mating shafts/components so power is transmitted through the drive system
- Helps maintain alignment and cushions minor shock to protect other parts
- Failure symptoms may include no or weak agitation/spin, intermittent drive, or clicking/grinding sounds
- Visual clues can include cracks, rounded/stripped splines, or excessive play
What's included:
Install notes:
- Disconnect power; turn off water supply if moving the appliance
- Access location varies by model; cabinet/top or front panel removal may be required
- Note orientation of flats/splines and seat the coupling fully—do not hammer into place
- Inspect the mating hub/shaft; replace worn companion parts to prevent rapid re-wear
Do-It-Yourself Stories from Customers like You
Broken drive on door dispenser for ice maker Richard H. • Bartlett , TN • March 07, 2016
My LG electric dryer stopped drying the other day and I searched on line for suggestions on what may have caused it to stop working. I came across AppliancePartsPros.com and quickly found some of the most common issues with my LG dryer. The problems were listed in the order of most common occurrence, and had extremely helpful and detailed instructions on how to not only diagnose the problem, they also showed exactly how to access and repair the issue. Unfortunately, it was late on a Thursday...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W11512417
The Refrigerator Drain Connector is an OEM part for Whirlpool refrigerators. It is responsible for directing water and condensation from the evaporator fan coil and defrost into the drain pan.
Causes of a bad drain connector can include cracks, breaks or deformations caused by repeated thermal cycling or impact damage. Mineral or lime buildup inside the connector over many years can also restrict water flow.
Symptoms of a bad drain connector include:
- Water or condensation leaks around the connector area
- Puddles or watermarks on the floor behind the fridge
- Slow drainage of water from the evaporator fan coil
- Mold or mildew growth near the connector or drain area
This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The problem was ice buildup on the floor of the freezer William B. • Pahoa , HI • January 15, 2016
A YouTube video: https://www.youtube.com/watch?v=jIdtNdDXFDk , by a professional appliance repair company described replacement of the freezer drain pipe with Kenmore's (by Whirlpool) revised drain pipe. Ice buildup inside the freezer was caused by warm air beneath the freezer contacting cold air from inside the freezer the resulting condensation freezing and blocking the drain, causing the ice buildup inside. The revised drain tube functions as a p-trap to prevent cold/warm air interaction....
Read more
More
$25.95
- Compare At:
-
$31.14
- You Save:
-
$5.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10224328
For the complete ice door kit order W10823377.
Do-It-Yourself Stories from Customers like You
Ice dispenser chute door was not closing or sealing Robert H. • West Palm Bch , FL • July 23, 2025
The ice dispenser chute door had not been sealing for years. The ice cubes on the lower portion of the ice bin would melt enough eventually to then freeze up into a big, amalgamated blob of ice due to ambient air coming up the chute. This melt-then-freeze would happen, to the extent the chute froze to its own closure. Despite service technician visits over a period of six years nothing they did resolved the issue. I opened the freezer door to reach into the bin from the top to extract usable...
Read more
More
$48.95
- Compare At:
-
$57.76
- You Save:
-
$8.81
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2203771
The Top Hinge is an OEM part for Whirlpool refrigerators. This hinge ensures the proper alignment and smooth operation of the refrigerator door, allowing it to open and close securely. It supports the weight of the door and helps maintain an airtight seal.
Causes of a bad top hinge can include general wear and tear, heavy use, or accidental damage.
Symptoms of a bad top hinge include:
- Refrigerator door sagging or misaligned
- Difficulty in opening or closing the door
- Door not sealing properly, leading to temperature fluctuations
- Unusual noises when the door is operated
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Needed hinges for doors William H. • Niles , MI • September 22, 2015
Put the new hinges on the doors fyi you need to tell what size the screws are for the hinge kits would help a lot
Read more
More
$51.26
- Compare At:
-
$61.00
- You Save:
-
$9.74
Genuine Whirlpool part
By: Whirlpool
Part Number: W10728484
This bracket is the structural support that secures a mating component inside the appliance. Replacing a damaged or missing bracket restores a tight, aligned fit so parts stay in place and operate without excess vibration or noise. What it does
- Provides a rigid mounting point and proper alignment for the attached component
- Helps prevent movement, vibration, rattling, and premature wear
- Direct replacement for a cracked, bent, or missing bracket
- Common symptoms include a loose/misaligned part, rattling sounds, or intermittent operation
What's included
Install notes
- Disconnect power; if the repair involves any water-carrying parts, turn off the water supply
- Note the original orientation and reuse existing model-specific fasteners
- Transfer any clips, spacers, or grommets from the old bracket if present
- Tighten securely but do not overtighten to avoid stripping threads or deforming the bracket
Do-It-Yourself Stories from Customers like You
We wrecked the ice maker with a hair dryer trying to melt ice that held the whole unit frozen Gary P. • Grantsburg , WI • February 20, 2017
Your parts were perfect. The repair save us from buying a $850 new refrig. We are so thankful.
Read more
More
$44.65
- Compare At:
-
$53.13
- You Save:
-
$8.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2206671B
Color: black. Measures about 9 inches wide by 2-1/2 inches deep.
Do-It-Yourself Stories from Customers like You
Stopped dispensing water Cristopher C. • Santa Rosa , CA • July 15, 2016
Ordered the parts. Watched a great video on this web site. Installed. Fixed. Easy peesey.
Read more
More
$55.38
- Compare At:
-
$65.35
- You Save:
-
$9.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2198608
The Whirlpool latch spring is an OEM replacement part responsible for securing the ice container or bin in place on a refrigerator. Its main function is to provide tension and support to the ice container latch, allowing it to engage and disengage properly. When the ice container is inserted into the refrigerator's ice compartment, the latch spring ensures that it securely locks in place, preventing accidental spillage of ice.
Causes of a bad latch spring can include metal fatigue from repeated use, rust or corrosion from exposure to moisture, or physical damage from accidental impacts.
Symptoms of a bad latch spring include:
- The ice container not staying in place and sliding out of position
- Difficulty in properly attaching or detaching the ice container from the refrigerator
- The ice container feeling loose or wobbly when inside the ice compartment
- The ice container not aligning correctly with the ice dispenser or auger
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice will not dispense from door John J. • Scottsdale , AZ • December 29, 2019
I replaced the driveshaft and the latch on the ice bin as well as the washer that prevents moisture and water from getting down the driveshaft and into the motor. It was an easy job, especially with the video.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489478
Size: 8 x 1/2 ab.
Do-It-Yourself Stories from Customers like You
Wanted to update wood paneled compactor Julie S. • San Antonio , TX • December 09, 2014
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10152859
Color: Black
Do-It-Yourself Stories from Customers like You
Refrigerator water dispenser stopped working Carlos R. • Houston , TX • September 19, 2014
The water dispenser stopped working on my Sears Kenmore (Whirlpool) side-by-side refrigerator and after much research on the web I purchased the parts that commonly failed for this condition. I should have first taken the dispenser assembly apart but I didn't--it looked a little too intimidating to do twice. As it turns out, what actually broke was the plastic assembly that holds the water actuator switch in place so the dispenser lever could not strike it. I was able to secure it in place...
Read more
More
$51.28
- Compare At:
-
$61.02
- You Save:
-
$9.74
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2323197
This defrost heater warms the evaporator during automatic defrost to melt built-up frost so air can move freely and temperatures stay consistent. Replace a failed heater to restore normal cooling and end recurring frost on the freezer panel.
- Melts ice from the evaporator coil during the defrost cycle
- Prevents frost buildup that restricts airflow and causes warm spots
- Helps maintain stable refrigerator and freezer temperatures
- Typical failure signs: heavy frost on the back wall, reduced cooling, fan noise from ice contact, frequent manual defrosting
Includes: 1 defrost heater
- Disconnect power before servicing; wear cut-resistant gloves
- Access through the freezer compartment; remove shelves/ice bin and rear panel to reach the evaporator
- Match wire connections and route leads exactly as original; keep wiring clear of the fan and sharp edges
- After reassembly, restore power and monitor a defrost cycle; if frost quickly returns, also evaluate the defrost thermostat and control
Do-It-Yourself Stories from Customers like You
Coil freezing and icing up Bob J. • Mchenry , IL • April 30, 2016
I replaced the defrost control and heater just to be sure. I usedmthe helpful video and though it took me 2 hours i gotmit done and saved hundreds
Read more
More
$61.75
- Compare At:
-
$74.10
- You Save:
-
$12.35