Kenmore Refrigerator 106.72002010 (10672002010, 106 72002010) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67003405
The Refrigerator Pivot Block is an OEM part for Whirlpool refrigerators. It supports the door hinge, allowing the refrigerator door to open and close smoothly. The pivot block ensures that the door stays aligned and securely attached to the refrigerator frame.
Causes of a bad pivot block can include wear and tear over time, heavy use, or damage from accidental impacts. Misalignment or excessive force when opening and closing the door can also contribute to its failure.
Symptoms of a bad refrigerator pivot block include:
- The refrigerator door not opening or closing properly
- A misaligned door that doesn't seal correctly
- Unusual noises when the door is operated
- The door feeling loose or wobbly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Buttons on control panel did not work some parts missing Suzan F. • Lexington , NC • November 17, 2015
We turned off the circuit breaker. We then removed the light cover and then the control panel. We disconnected the Keyboard, Utah, plugged in the new one and turned the breaker on to see if everything worked. We realized that we did not need a new jazz board so that is being returned. The old Keyboard was removed, the new one attached and all the parts were put back. The frig works fine now at the recommended settings of zero and 38F.
Read more
More
$10.43
- Compare At:
-
$12.52
- You Save:
-
$2.09
Genuine Whirlpool part
By: Whirlpool
Part Number: W11024089
The Evaporator Motor is an OEM replacement part for Whirlpool refrigerators. It is a vital component that powers the evaporator fan, which circulates air over the evaporator coils to provide cooling within the refrigerator compartments.
Symptoms of a need to replace the evaporator motor:
- Inadequate cooling or uneven temperature distribution within the refrigerator
- Loud noises or excessive vibrations coming from the evaporator area
- Complete failure of the refrigerator to cool or maintain temperature
Causes of a faulty evaporator motor can include general wear and tear, electrical malfunctions, bearing failures, or physical damage from impact or foreign objects.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
The bottom freezer is working fine refrigerator is warm. John Paul H. • Glen Burnie , MD • September 18, 2022
If the freezer is cold and the fridge is hot, logic would indicate that the fan blowing the cold air from the freezer into the refrigerator is not working. Searched the ApplicancePartsPros.com website for a fan in the freezer compartment and found the video on how to replace one.
Followed the steps in the video to get the freezer partially disassembled and found the whole back of the freezer frozen over. Plugged the refrigerator back in and verified that the fan was not working.
Unplugged...
Read more
More
$50.31
- Compare At:
-
$59.87
- You Save:
-
$9.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10568041
The Crisper Shelf Frame is an OEM part for Whirlpool side-by-side refrigerators. It provides sturdy tracked support for organizing vegetables and other produce items in the crisper drawers. The glass and center support are NOT included and must be ordered separately.
Causes of a bad crisper shelf frame can include heavy loads causing cracks or breaks, exposure to moisture leading to warping, or accidental impacts during loading and unloading of groceries.
Symptoms of a bad crisper shelf frame include:
- Cracks or breaks in the frame
- Difficulty sliding crisper drawers in and out
- Items stored on the shelf are unstable or fall through
- The frame not fitting securely in its designated space
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
This part doesn't have any support across the back in the center and it finally broke too bad to use Keith O. • Springfield , MO • January 11, 2019
So this is a poor design in the first case. Not having a center support in the back almost guarantees a failure there eventually. I kludged together a support in my original more than a year ago, but finally the part broke too bad to limp along with anymore.
This is the part I needed. That being said, be very attentive about the fact that it's not the entire shelf assembly.
There is a metal support across the front of the frame that is not included. The trim above the drawers, and the...
Read more
More
$87.75
- Compare At:
-
$105.30
- You Save:
-
$17.55
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001716
The Ladder Hook is an OEM part for Whirlpool refrigerators. It is located on the side or back wall of the refrigerator and is responsible for holding and securing the crisper drawer covers in place. It provides stability and support to ensure that the covers remain properly aligned and securely attached to the refrigerator.
Causes of a faulty ladder hook can include wear and tear over time, damage due to excessive force or impact, or misalignment due to improper installation.
Symptoms of a bad ladder hook may include:
- Crisper drawer covers not staying securely in place
- Visible damage or deformation of the hook
- Difficulty in removing or reattaching the covers
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Broken plastic parts holding the crisper drawers including the frame holding the crisper drawers Manning W. • Portland , OR • January 06, 2018
First, I watched your VERY HELPFUL videos showing exactly how to remove and assemble the parts. I removed the salvageable parts from the old shelf frame and reassembled it.
Read more
More
$11.50
- Compare At:
-
$13.80
- You Save:
-
$2.30
Genuine Whirlpool part
By: Whirlpool
Part Number: W11346623
The Whirlpool Refrigerator Water Filter Head is an OEM part for Whirlpool refrigerators. It serves as the connection point for the water filter, allowing clean, filtered water to flow to your refrigerator's dispenser and ice maker. This part ensures that your refrigerator delivers fresh and safe drinking water.
Causes of a bad water filter head can include wear and tear over time, mineral buildup from hard water, or damage due to improper installation or mishandling.
Symptoms of a bad water filter head include:
- Water leaks around the filter area
- Decreased water flow from the dispenser
- Ice maker not producing ice
- The filter not locking into place correctly
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water filter head had cracked and water was leaking inside the fridge Ari M. • Winchester , MA • June 16, 2020
Fixing it was extremely easy, I just followed the instructions provided in the AppliancePartsPros video. After getting the part I simply shut off the water to the fridge, unhooked the part's water lines, unclipped the head inside the fridge, installed the new one and reconnected the lines. Took about 15 minutes and likely saved $300 (what a service person would have charged). It was simple.
Read more
More
$80.21
- Compare At:
-
$95.45
- You Save:
-
$15.24
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12722803B
Color: Black
The Door Guide is an OEM part for Whirlpool refrigerators. It helps to guide and align the refrigerator door during opening and closing, ensuring a smooth and secure fit that maintains the seal and efficiency of the refrigerator.
Causes of a bad door guide can include wear and tear from regular use, physical damage from accidental impact, or misalignment due to improper handling or installation.
Symptoms of a bad door guide include:
- Difficulty in opening or closing the door
- The door not sealing properly
- Visible damage or misalignment of the door guide
- Unusual noises during door operation
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door was not closing correctly all the time Kirk F. • Plano , TX • April 05, 2015
Looked for parts online that were worn and compared prices. Best price was appliance part pros. Ordered and received in 2 days and easily replaced worn parts.
Read more
More
$140.58
- Compare At:
-
$165.88
- You Save:
-
$25.30
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002497
The Drawer Gear Kit is an OEM part for Whirlpool refrigerators. This kit is designed to repair or replace the gear system that operates the sliding or rolling mechanism of a refrigerator drawer. It includes all necessary gears and components to ensure smooth operation of the drawer, allowing for easy access to fruits, vegetables, meats, or other items stored inside.
Causes for replacement can vary, including wear and tear from regular use, damage from overloading the drawer, or accidental breakage. Over time, the gears can wear down, lose teeth, or become misaligned, leading to poor drawer performance.
Symptoms of a bad Drawer Gear Kit include:
- The drawer is difficult to open or close
- A grinding or clicking noise when the drawer is moved
- The drawer sticks or jams during operation
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gear on freezer pull out door broke Jon J. • Corry , PA • July 18, 2015
Pulled out storage bin Removed side track rail covers Popped off gear from holding clip Installed drive shaft Installed rail cover and storage bin
Only took about 15 minutes
Read more
More
$19.95
- Compare At:
-
$23.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12729128
The Defrost Heater is an OEM part for Whirlpool refrigerators. This part prevents the build-up of frost and ice on the evaporator coils. By periodically heating up to melt away frost, this component ensures that air can flow freely through the coils, maintaining the refrigerator's efficient cooling performance.
Causes of a bad defrost heater can include electrical issues, such as a blown fuse or faulty wiring, wear and tear over time, or a malfunction within the heating element itself.
Symptoms of a bad Defrost Heater include:
- Frost or ice buildup on the evaporator coils
- The refrigerator or freezer compartment warming up
- The refrigerator cycling on more frequently or for longer durations
- Poor cooling performance throughout the refrigerator
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refigerator not cold Robert B. • Parlin , NJ • July 10, 2016
Having never fixed a fridge before, I did a little research. The unit was not old & the cooling system was operating. Observing the frozen ice inside, I diagnosed it as the heat rod and/or it's thermostat as bad. I contacted ApplianceParts Pros, who assisted in confirming my theory. IMPORTANT NOTE: the sales advisor Joyce was truly an intelligent, knowledgable professional, NOT some "burger-order taker" usually encountered. This alone speaks VOLUMES. Subsequently, the parts arrived...
Read more
More
$78.78
- Compare At:
-
$93.75
- You Save:
-
$14.97
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67002633
The Pan, Crisper is an OEM part for Whirlpool refrigerators. It is designed to store fruits and vegetables, providing an optimal environment to keep produce fresh for a longer period. The crisper pan helps maintain the right humidity levels, ensuring your produce stays crisp and tasty. Its dimensions approximately measure 6.9" High x 14.05" Wide x 14.9" Long.
You should replace this crisper pan if it becomes damaged or broken. Causes of a bad crisper pan can include regular wear and tear, exposure to heavy items, or accidental drops. A damaged pan can lead to decreased storage efficiency and potential spoilage of produce.
Symptoms of a bad Pan, Crisper include:
- Cracks or breaks in the pan
- Difficulty in sliding the pan in and out of its compartment
- Reduced ability to maintain humidity levels
- Produce not staying fresh as long as expected
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken veggie drawer in frig Larry G. • Newport , RI • September 06, 2015
Ordered part, the correct part came the next day.
Read more
More
$100.26
- Compare At:
-
$118.31
- You Save:
-
$18.05
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10436250
The Freezer Door Gasket is an OEM part for Whirlpool refrigerators. This gasket forms an airtight seal around the freezer door, preventing warm air from entering and cold air from escaping. It is essential for maintaining the freezer's efficiency and keeping food items properly frozen.
You should replace the freezer door gasket if it becomes damaged or worn out. Causes of a bad gasket can include regular wear and tear, exposure to temperature fluctuations, or damage from frequent opening and closing of the freezer door.
Symptoms of a bad freezer door gasket include:
- Visible cracks or tears in the gasket
- The freezer door not closing properly or staying closed
- Excessive frost buildup inside the freezer
- Increased energy bills due to the appliance working harder to maintain temperature
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Gasket not working Kim R. • Kilauea , HI • May 02, 2015
Ordered the new gasket from you - installed it and now my freezer is sealed
i called to order the correct replacement and they were the very best at helping me !!!!!
Read more
More
$136.74
- Compare At:
-
$162.72
- You Save:
-
$25.98
Genuine Whirlpool part
By: Whirlpool
Part Number: W11197396
The Endcap Kit is an OEM part for Whirlpool refrigerators. This kit is crucial for supporting the shelves, providing a polished look and helping to secure the shelf edges in place. Designed specifically for Whirlpool models, this part plays a key role in the overall functionality and aesthetic appeal of the refrigerator's interior.
The causes for these issues often stem from normal wear and tear, accidental damage during cleaning or adjustment, or improper installation. Ensuring that the Endcap Kit is intact and properly installed is essential for maintaining the structural integrity of your refrigerator shelves and preventing potential injuries or damage to items stored on them.
Symptoms of a malfunctioning Endcap Kit include:
- Loose or unstable shelves
- Difficulty in adjusting or securing shelves to the desired height
- Broken or missing endcap pieces, leading to sharp, exposed edges
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken hinge pin on right end cap Gerald P. • Lacey , WA • August 10, 2021
Although I only needed to replace the drawer support (end cap) on the right side the kit comes with replacements for both sides. I was surprised to see that the air flow adjustment mechanism that is located on the right side end cap was not included. I should mention that I did not disassemble the drawer mechanisms before ordering the end cap(s). The kit contained only the two molded end caps - no fasteners, mechanisms, or anything else. It turns out that this was all perfectly fine.
The...
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: W11613295
The Motor-Condenser Fan is an OEM part for Whirlpool refrigerators. This motor drives the condenser fan, which is essential for cooling the compressor and expelling heat from the refrigerator. By maintaining optimal temperatures within the cooling system, it ensures the efficient operation of the refrigerator.
Over time, the motor-condenser fan can fail due to electrical issues, wear and tear, or exposure to dust and debris. A malfunctioning fan motor can lead to overheating and reduced cooling efficiency.
Symptoms of a bad motor-condenser fan include:
- The refrigerator running continuously or not cooling properly
- Unusual noises from the back of the refrigerator
- The compressor overheating
- Poor airflow around the condenser coils
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Noisy bearings in condenser fan motor Glenn S. • Eagleville , PA • November 22, 2015
I bought the listed condenser fan motor for my Maytag refrigerator. Access to the condenser fan is by removing sheet metal screws of bottom panel with 1/4 in. nut driver. Condenser fan is on left side of rear access area. Remove electrical connector by pressing-in connector release tab with thumb fingernail and pulling on connector. Remove three mounting screws with 5/16 nut driver. Work fan out to the right past the compressor. I used a pair of pliers, as a lever, behind the plastic fan blades...
Read more
More
$60.95
- Compare At:
-
$72.53
- You Save:
-
$11.58
Genuine Whirlpool part
By: Whirlpool
Part Number: 350930
Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.
The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.
The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.
Symptoms needing for Appliance Spray Paint include:
- Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
- A desire to refresh or update the appearance of the appliance without the need for complete replacement
- Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015
Replaced It With New One
Read more
More
$24.95
- Compare At:
-
$29.94
- You Save:
-
$4.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WP67001668
The Water Filter Backing Plate is an OEM part for Whirlpool refrigerators. It supports and secures the water filter, ensuring it stays in place and functions correctly to provide clean, filtered water.
Over time, the backing plate can become damaged due to regular use, exposure to moisture, or physical impact. A compromised backing plate can lead to improper positioning of the water filter, potentially causing leaks or reduced filtration efficiency.
Symptoms of a bad Water Filter Backing Plate include:
- Water filter not fitting securely or properly
- Leaks around the water filter area
- Reduced water flow or filtration issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Water filter holder was broken John B. • Chester , VA • June 04, 2015
Used screwdriver to push in plastic tabs holding old unit to the top of the refrigerator box
Read more
More
$15.65
- Compare At:
-
$18.47
- You Save:
-
$2.82
Genuine Whirlpool part
By: Whirlpool
Part Number: 72017
The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.
Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.
Symptoms indicating the need for Appliance Touchup Paint include:
- Visible scratches or chips on the appliance surface
- Areas of exposed metal prone to rust
- Blemishes that affect the overall aesthetic of the appliance
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Chipped paint Thomas S. • Middletown , DE • September 03, 2014
Touch up paint
Read more
More
$12.55
- Compare At:
-
$15.06
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP681249
The Screw is an OEM part for Whirlpool refrigerators, designed to secure components of the ice maker assembly. This screw maintains the structural integrity of the ice maker, ensuring that all parts are tightly fastened to prevent malfunction or inefficiency in ice production.
Causes of failure can include stripping of the screw threads through over-tightening or corrosion, leading to a less secure fit.
Symptoms of a bad Screw include:
- Loose or dislodged components within the ice maker assembly.
- Inconsistent or halted ice production due to components shifting.
- Unusual noises emanating from the ice maker as a result of loose parts.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
The handle on the refrigerator door was broken and needed to be replaced Richard W. • Baltimore , MD • April 12, 2015
Took off the freezer door, took off the top hinge on the refrigerator door, replaced the handle, re-installed the top hinge and the freezer door. This is a two person job - one to remove the top hinge and replace the handle, while a second person holds the refrigerator door in place. Replacing the handle was easy. The most irritating part was figuring out what parts to order. The drawing of the refrigerator door (Drawing # 4) used to figure out what parts to order was not clear. I paid $8...
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13