Kenmore Washer 110.28002011 (11028002011, 110 28002011) Parts

The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.

This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Drive Clutch Kit is an OEM replacement part for Whirlpool washing machines. As an integral transmission component, it includes the clutch that engages the drive motor to rotate the central agitator or impeller. 

Causes of a bad clutch kit include worn parts that have aged from repeated use. Signs include slipping, grinding, or clicking noises from the transmission area.

Symptoms of a faulty clutch kit are:

• The washer tub failing to turn or agitate clothes during wash cycles  
• Delayed starts or intermittent rotation
• Vibration or shaking sensed from the frontloader or toploader

This OEM replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. 

The washer drive belt transfers motor power to the washer’s drive system so the basket spins and agitates. Replacing a stretched or broken belt helps stop squealing and slipping so cycles finish at proper spin speed.

What it does

• Links the drive motor to the washer’s drive/pulley system
• Restores spin and agitation when the belt is worn, glazed, or broken
• Can reduce squeal or burning-rubber smells from belt slip
• Helps prevent intermittent or no-spin conditions

What’s included
One drive belt.

Install notes

• Unplug power; turn off water
• Tip the washer back; remove the bottom shield/cover if present
• Route the belt over the motor and drive pulleys; rotate by hand to seat fully
• Inspect pulleys/drive parts for wear; run a spin or calibration test after install

This OEM Whirlpool belt is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.

The Lid Latch Assembly is an OEM part for Whirlpool washing machines. It ensures that the washer lid is securely locked during operation, preventing it from being opened mid-cycle, which could cause water spills and interrupt the washing process. This component plays a vital role in the safety and functionality of the washing machine by ensuring that the lid remains closed during washing and spinning cycles.

Causes of a bad lid latch assembly can include regular wear and tear, electrical failures, or physical damage from forcefully opening or closing the lid. When the lid latch assembly is faulty, it can affect the washer's ability to start or complete a cycle properly.

Symptoms of a bad Lid Latch Assembly include:

• The washer not starting or stopping mid-cycle
• Error codes related to lid lock issues
• The lid not locking or unlocking properly
• The washer pausing unexpectedly during operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Shift Actuator is an OEM replacement part for Whirlpool washing machines. It is an electronic component located inside the transmission that controls the shifting between wash cycles. The shift actuator receives signals from the washer control board to change modes, initiating proper movements to advance the cycle.

Symptoms of a bad shift actuator include:

• The washer fails to advance through cycles properly
• Gets stuck in one phase of the wash cycle
• Makes abnormal noises during operation
• Does not agitate or spin as expected

Over time, environmental factors and normal wear and tear can cause the shift actuator to malfunction. 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

NOTE: This new version of the part features a redesigned black plastic housing with an adapter wire harness. It replaces the older version that came in red plastic. The new part is guaranteed to fit and function like the original.

The Tub Centering Spring Kit is an OEM replacement part for Whirlpool washing machines. This kit includes a set of springs that are essential for maintaining proper alignment and positioning of the wash tub within the outer cabinet.

Symptoms of needing to replace the tub centering spring kit include:

• Excessive vibration or shaking during the wash cycle
• Loud banging or knocking noises
• Tub becoming misaligned or off-center
• Leaks or water seeping due to increased stress on the tub

Causes of a faulty tub centering spring kit can include normal wear and tear over time, exposure to heavy or unbalanced loads, or physical damage due to impact or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.

The Suspension Bearing Kit is an OEM part for Whirlpool washing machines. It is designed to support the tub assembly and ensure smooth, stable operation during the wash cycle. The kit includes bearings and other components that help absorb vibrations and reduce noise, contributing to the longevity and efficiency of the machine. The 8-piece set has 4 types of suspension rod supports made of strong plastic and about 1.5 inches in diameter. 

Symptoms of a bad Suspension Bearing Kit include:

• Unusual noise during the spin cycle,
• Excessive vibration or "walking" of the washer,
• The washing machine drum sagging or appearing off-balance.

Causes of suspension bearing failure often involve wear and tear from regular use, overloading of the machine, or inadequate maintenance leading to deterioration of parts.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Washplate Bolt is an OEM part for Whirlpool washing machines. This bolt is designed to secure the washplate to the washer's drive shaft, ensuring stable and effective agitation during the wash cycle.

Causes of a bad washplate bolt can include stripping or wearing out from regular use, corrosion from exposure to water and detergents, or damage due to over-tightening or improper installation. A faulty bolt can compromise the washplate's stability and affect the washing machine's performance.

Symptoms of a bad washplate bolt include:

• The washplate being loose or wobbling during operation
• Unusual noises such as rattling or clunking during the wash cycle
• Poor cleaning performance due to ineffective agitation
• The washplate detaching from the drive shaft

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drain Pump is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer during the drain cycle. It ensures that water is efficiently pumped out of the washing machine, preventing water from remaining in the tub after a wash cycle, which is crucial for the appliance's proper operation and the cleanliness of your laundry.

You should replace the drain pump if it becomes faulty or stops working. Common causes of a bad drain pump include blockages from debris or lint, wear and tear over time, or electrical malfunctions. These issues can prevent the pump from effectively draining water.

Symptoms of a bad drain pump include:

• Water not draining from the washing machine
• Unusual noises during the drain cycle, such as humming or grinding
• The washer stopping mid-cycle with water still in the tub
• Error codes related to draining issues on the washer's display

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Lid Latch Strike is an OEM part for Whirlpool washing machines. This component is crucial for securing the washer lid during operation, ensuring the lid stays closed and the washer can function safely and efficiently. The lid latch strike works in conjunction with the lid latch assembly to engage and lock the lid when the washer is in use.

You should replace the lid latch strike if it becomes damaged or worn out. Common causes of a bad lid latch strike include regular wear and tear, physical damage from forceful closing, or misalignment from repeated use.

Symptoms of a bad lid latch strike include:

• Washer lid not staying closed
• Washer not starting or stopping mid-cycle
• Error codes related to the lid lock mechanism
• The washer lid feels loose or misaligned

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Knob Spring Clip is an OEM part for Whirlpool appliances, specifically designed for use in washers and dryers. This small but essential component is responsible for securing the control knob to the control panel, ensuring that the knob stays firmly in place during operation.

Common causes of a bad spring clip include frequent use, accidental impacts, or wear and tear over time. A faulty spring clip can result in the control knob becoming loose or falling off, making it difficult to operate the appliance.

Symptoms of a bad knob spring clip include:

• The control knob is loose or wobbly
• The control knob falls off easily
• Difficulty in turning or setting the control knob
• The appliance not responding correctly to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Inlet Hose Screen and Gasket is an OEM part for Whirlpool washing machines. This component is designed to filter debris from the water entering the machine and ensure a tight seal between the hose and the water inlet valve. By preventing debris from entering the washing machine, it helps to maintain the appliance's performance and longevity.

Causes of a bad inlet hose screen and gasket can include clogging from mineral deposits or debris, wear and tear over time, or damage due to improper installation or removal. A compromised screen or gasket can lead to reduced water flow and potential leaks.

Symptoms of a bad inlet hose screen and gasket include:

• Reduced water flow into the washing machine
• Visible debris or buildup on the screen
• Water leaks at the hose connection
• The washing machine not filling properly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Drum Mounting Hub is an OEM part for Whirlpool washing machines. This hub connects the washer drum to the drive system, allowing the drum to spin during the wash and spin cycles. It is integral to the proper functioning of the washer, ensuring that clothes are cleaned effectively and efficiently. The kit includes the drive block, drive hub, tub nut, hardware and instruction sheet.

Causes of a bad drum mounting hub can include wear and tear from regular use, corrosion from constant exposure to water, or physical damage due to unbalanced loads or overloading.

Symptoms of a bad drum mounting hub include:

• The washer drum not spinning or spinning unevenly
• Loud noises such as banging or clunking during operation
• Excessive vibration or movement of the washing machine
• Clothes coming out wetter than usual due to ineffective spinning

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Tub Seal is an OEM part for Whirlpool washing machines. Located between the outer tub and inner basket, it forms a barrier preventing leaks that could damage surrounding components and structures.

Causes of a bad tub seal can be cracks or compression failures due to repetitive impacts and stresses from continual clothes tumbling. Detergents and temperature fluctuations also break down rubber over decades when exposed to laundry environments.

Symptoms of a bad tub seal include: 

• Water leakage noticed around the base of the washer cabinet
• Reduced or inefficient cleaning from leaking wash water 
• Potential water damage risks to floors and home infrastructure

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The Hose is an OEM replacement part for Whirlpool washing machines. It is a flexible tube responsible for draining and expelling the used water from the washer tub after each wash cycle.

Symptoms of a faulty drain hose include:

• Water leaks around the hose connections or along its length
• Slow draining or improper drainage of the tub
• Visible cracks, bulges, or damage to the hose material

Causes of a bad washer drain hose can include normal wear and tear over time, exposure to high water pressure or temperatures, physical damage from kinks or pinches, or improper installation or connections.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models. 

The Suspension Rod Kit is an OEM part for Whirlpool washers. This kit contains the suspension rods that connect the outer tub to the base of the washing machine, providing support and stability during the wash cycles. Each rod measures 23-1/4"L x 1-1/2" in diameter, designed to handle heavy loads.

Symptoms of worn or damaged suspension rods may include:

• Excessive vibration or shaking during spin cycles
• Loud banging or thumping noises
• Leaks due to increased stress on tub components
• The washing machine walking or moving excessively

Causes of suspension rod failure can include normal wear over time, impact or damage from overloading, or improper leveling and installation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washer models.