Kenmore Washer 110.29832800 (11029832800, 110 29832800) Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3390631
10 - 16 x 1/2
Do-It-Yourself Stories from Customers like You
Agitator wasnt sloshing Paige B. • Clarksville , TN • January 30, 2015
I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair...
Read more
More
$7.31
- Compare At:
-
$8.70
- You Save:
-
$1.39
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62691
Rubber grommet for motor mount stud.
Do-It-Yourself Stories from Customers like You
Washer did not agitate Gary S. • Kimberling City , MO • December 26, 2016
Replaced dog ears.
Read more
More
$8.95
- Compare At:
-
$10.56
- You Save:
-
$1.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62658
Washer thrust ring acts as a bearing spacer between the outer tub and basket drive, controlling end-play and reducing friction. Replace when worn to restore smooth, quiet operation and prevent premature wear.
Do-It-Yourself Stories from Customers like You
Washer driver block was worn out Melissa J. • Battle Creek , MI • March 15, 2015
Purchased parts from your site and did a self repair. Excellent quality , speedy delivery and easy to install. Now our 13 year old washer works as good as new.
Read more
More
$8.95
- Compare At:
-
$10.65
- You Save:
-
$1.70
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8578209
Fixes poor cleaning or clothes not moving during wash cycle. This agitator restores proper wash action by rotating and lifting laundry through water. DIY-friendly repair.
Do-It-Yourself Stories from Customers like You
Agitator was broke Daniel P. • Madison , OH • August 09, 2016
Striped the agitator out and replaced the bottom portion of agitator.
What was amazing was I placed the order Friday at 5 pm. It arrived Saturday at7:30pm.
Read more
More
$100.95
- Compare At:
-
$121.14
- You Save:
-
$20.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10292584
Washer won't fill with water or overfills? This water level pressure switch monitors tub water levels. Easy DIY repair, typically takes 5-10 minutes.
Do-It-Yourself Stories from Customers like You
Maytag centennial(mvwc6esww0) washer agitates fills at same time&refills after last spin cycle Regina R. • Inverness , FL • September 14, 2016
I viewed various sites online. On www.shopyourway.com I found some information on how to determine if it was a faulty load sense switch, or faulty timer. On youtube I entered; change load sense switch. I viewed theapplianceman video.I performed the test per shopyourway.com It was a faiIed load sense switch.Prior to the test I checked to make sure my drain tube was not clogged. I ignored applianceman info on cutting clear plastic tube. I did make sure it was not clogged. I ignored his testing...
Read more
More
$157.48
- Compare At:
-
$185.83
- You Save:
-
$28.35
Genuine Whirlpool part
By: Whirlpool
Part Number: W10389328
Inner tub basket holds clothing during wash cycles. Replace if cracked, rusty, or broken. Installs in center of washer between outer tub and agitator.
Do-It-Yourself Stories from Customers like You
Replacement of rusty inner basket Michael K. • Paramus , NJ • April 18, 2015
Ordered the parts from AppliancePartsPros - super fast shipping, and even though I opted for regular shipping all of my parts arrived the very next day, including the big and bulky inner basket. Disassembly went smoothly, simply following the directions in the AppliancePartsPros video. The only problem I had was that the inner basket simply would NOT come of the drive block no matter what I did. Struggled for a few hours trying to take it off. Then, I called AppliancePartsPros and they said it...
Read more
More
$292.95
- Compare At:
-
$329.48
- You Save:
-
$36.53
Genuine Whirlpool part
By: Whirlpool
Part Number: 63849
Replace your washer's cracked or leaking outer tub. This housing holds the inner basket and prevents water from leaking into the machine's interior.
Do-It-Yourself Stories from Customers like You
Outer tub cracked Brian H. • North Tonawanda , NY • February 06, 2015
Replaced tub and center post seal
Read more
More
$230.95
- Compare At:
-
$256.32
- You Save:
-
$25.37
Genuine Whirlpool part
By: Whirlpool
Part Number: W10820044
Replacement power cord that connects your washer to the wall outlet. Includes strain relief for cable protection. Needed when original cord is damaged, pinched, shorted, or worn. Direct plug-in installation.
Do-It-Yourself Stories from Customers like You
Power cord got pinched and shorted out Gary D. • Kentwood , MI • July 27, 2014
Bought a new cord and removed the back of the washer and unclipped the old and clipped in the new. 5 minutes tops.
Read more
More
$78.95
- Compare At:
-
$93.95
- You Save:
-
$15.00
Genuine Whirlpool part
By: Whirlpool
Part Number: 285353
This retainer ring is a genuine OEM replacement part sourced directly from the manufacturer for use on front load washing machines to hold the boot seal in place. The boot seal is the gasket that seals the washing machine when the door is closed to prevent water from leaking. The retainer ring is located flush against the boot seal and has either a spring clamp or screw clamp that secures it. Over time, this ring may become damaged due to the washing machine's normal use and age. If the ring is not tight, the washing machine could leak when in use. If water is coming from the door, it is a good idea to inspect and replace the retainer ring and possibly the boot as well.Unplug the washing machine to prevent electrocution. Remove the front panel, the detergent dispenser, and the kickplate to access the retainer ring. Locate the clamp on the ring and loosen it. Remove the retainer ring and set it to the side. Inspect the boot and then install the new retainer ring. Tighten the clamp and reassemble the washing machine. This retainer ring is sold as an individual unit. It is designed specifically for washing machines manufactured by Whirlpool.
Do-It-Yourself Stories from Customers like You
Washer would agitate but would not go into high spin sounded like spin was working though Mario M. • Corona , CA • January 03, 2015
Im not a repairman, so all my knowledge to fix my washer came from either youtube or online chats. I posted this to help the next dad trying to save a few bucks.
Door sensor...
Since door sensor worked correctly, verified that by starting washer with door open, and agitate cycle would not start until door was closed. Meaning door sensor worked correctly.
Timer...
In high spin cycle washer sounded correcltly spinning, but when opening door, drum was was not moving. So timer was triggering...
Read more
More
$5.95
- Compare At:
-
$7.02
- You Save:
-
$1.07
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10175893
This water inlet valve regulates the flow of household water into the refrigerator for ice making and dispensing. Replacing a failing valve restores proper fill and helps resolve leaks, low flow, and no-ice/no-dispense issues. What it does:
- Opens and closes to supply water to the ice maker and/or dispenser when energized by the control
- Addresses symptoms like no water at the dispenser, no ice production, slow fill/hollow cubes, or dripping/leaks at the valve area
- Common failures include stuck or leaking valve, clogged screen, or a failed solenoid coil
- Helps eliminate valve buzzing with no fill when the coil is energized but the valve won't open
What's included:
- 1 water inlet valve assembly
Install notes:
- Disconnect power and shut off the water supply before servicing
- Keep towels/containers handy; some residual water will drain when lines are removed
- Note and label each tube and wire position; transfer any fittings/brackets from the old valve if applicable
- After installation, restore water and power, check all connections for leaks, and purge air by dispensing water
Do-It-Yourself Stories from Customers like You
Very slow cold water infeed into washer tub Steve K. • Albany , GA • June 24, 2016
I called AppliancePartsPros to find a replacement water inlet valve. They talked me through finding the clothes washer model number. Once the model number was located, the AppliancePartsPros person on the phone found the correct replacement valve. I received the valve 3-5 days after ordering. I downloaded the clothes washer repair manual and watched some YouTube videos regarding valve replacement. I followed the steps in the repair manual being careful to mark anything I had removed during...
Read more
More
$157.32
- Compare At:
-
$187.21
- You Save:
-
$29.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10086010
Secures the motor to its mounting point in your laundry center. Replace if the retainer is worn, broken, or has lost tension to prevent motor misalignment.
Do-It-Yourself Stories from Customers like You
Lost a motor fastener in my washer Carl S. • Sweet Home , OR • October 17, 2019
I bought it here. It came quickly. I took the washer apart and put it in.
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3400516
Secures panels or brackets in your laundry center to prevent vibration noise. Replace missing, stripped, or worn screws to restore a tight fit.
Do-It-Yourself Stories from Customers like You
No spin on spin cycle Richard S. • Beaumont , CA • August 28, 2015
Replaced clutch assembly which was a little tricky, but very doable. Just make sure to take your time. I do have to say that I am very impressed with AppliancePartsPro customer service when the replacement part also failed. A new clutch assembly was at my door step a few days later. I now has a working washer again. Thanks Again Appliance Parts Pro.
Read more
More
$5.95
- Compare At:
-
$7.14
- You Save:
-
$1.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8537434
This dishwasher cam assembly is a precision-molded drive component that converts rotation into the timed movement the mechanism needs. Replacing a worn cam helps restore smooth, reliable actuation during the cycle and reduces sticking or misalignment.
- Converts rotational input into precise motion for the linked latch/actuator mechanism
- Maintains proper timing and engagement so the mechanism operates when commanded
- Wear or cracking can lead to slipping, binding, or incomplete travel
- Typical symptoms: associated action fails to engage/release at the right time, intermittent operation, or clicking/grinding noises from the mechanism
What's included: 1 cam assembly Installation notes:
- Disconnect power at the breaker and shut off water before servicing
- Access the mechanism; note cam orientation and linkage positions
- Transfer any reusable pins/springs; install the new cam in the same orientation
- Run a test cycle to ensure proper operation and check for leaks or abnormal noises
Do-It-Yourself Stories from Customers like You
Agitator didn't work Rick K. • Naperville , IL • June 20, 2021
Simple by using 7/16 socket with long extension to remove the bolt and pull the whole agitator out and clean them. Put back in together with new parts. It works fine now.
Read more
More
$64.22
- Compare At:
-
$76.42
- You Save:
-
$12.20
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8578210
Agitator not working or spinning freely? This upper auger assembly restores the one-way ratcheting action for proper clothes rollover and cleaning.
Do-It-Yourself Stories from Customers like You
Agitator was not working Kenneth H. • Cleveland , TX • March 21, 2016
Ordered a agitator
Read more
More
$115.79
- Compare At:
-
$138.95
- You Save:
-
$23.16
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8533540
Fix agitator not working or washer won't spin. This spring retainer secures the tension spring in your agitator assembly. Easy 30-minute DIY repair.
Do-It-Yourself Stories from Customers like You
Agitator dogs worn & inner cap seal brittle. Natalie T. • Roosevelt , UT • August 05, 2017
Replaced dogs & cap seal. I also replaced Spring retainer since it was worn and I had it apart. Easy repair. Used a screwdriver to pop off fabric softener cap. socket to remove the agitator. I used a flathead screwdriver to remove the spring from the retainer. I cleaned everything and reassembled. It was a very easy repair. Saved at least $100. doing it myself.
Appliancepartspro.com is fast. I will buy from them in the future. Thanks guys!
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP616099
This hose clamp secures a hose connection to prevent leaks and keep your appliance running smoothly. It provides a tight, reliable hold on the hose fitting so water or air stays contained during operation.
- Tightens around a hose and fitting to maintain a secure seal
- Helps stop drips, seepage, or loose connections
- Common fix when you see moisture around a hose joint
- Useful if a clamp is rusted, stretched, or no longer holding tension
What's included: One hose clamp. Install notes:
- Unplug power and shut off water (if applicable) before servicing
- Note clamp position/orientation before removal
- Use appropriate screwdriver or nut driver to tighten evenly
- Do not overtighten—ensure a snug, leak-free seal without damaging the hose
Do-It-Yourself Stories from Customers like You
Water leak Steven K. • New City , NY • August 10, 2018
Took off cover, installed new parts.
Read more
More
$9.95
- Compare At:
-
$11.59
- You Save:
-
$1.64