Kenmore Refrigerator 253.54673304 (25354673304, 253 54673304) Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 241796405
The Icemaker Fill Tube is an OEM part for Frigidaire refrigerators. This tube is responsible for directing water from the water supply line to the icemaker, allowing for the production of ice. It ensures that water is efficiently delivered to the icemaker without leaks or blockages.
You should replace the icemaker fill tube if it becomes damaged or blocked. Causes of a bad fill tube can include mineral deposits or debris clogging the tube, cracks or leaks from wear and tear, or damage from mishandling during maintenance.
Symptoms of a bad icemaker fill tube include:
- No ice production
- Leaks around the icemaker area
- Ice cubes being smaller than usual
- Water overflowing or not reaching the icemaker
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Frigidaire refrigerator model FRS3HR5HMB5 having issues with ice buildup around the evaporator fan have had similar issue for three to four years Keith C. • Cypress , TX • November 12, 2018
Changed the Frigidaire Icemaker Fill Tube Part # 241796405 (AP5671747) about a week ago and so far the Frigidaire Refrigerator seems to work fine. Did not use other ordered parts. Recently ice formed around internal evaporator fan and it started making loud noise when then fan and compressor, etc were running. A long winded history noted below if interested:
I have been fighting with this Frigidaire Refrigerator for about 3 to 4 years, started out with the evaporator fan making noise when ice...
Read more
More
$26.95
- Compare At:
-
$32.07
- You Save:
-
$5.12
Genuine Frigidaire part
By: Frigidaire
Part Number: 240396002
The Refrigerator Water Filter Base is an OEM part for Frigidaire refrigerators. It holds the water filter in place and provides a secure connection to the water supply, ensuring clean and filtered water flows through the refrigerator.
Causes of a bad water filter base can include wear and tear over time, damage from improper filter installation, or issues with the water connections leading to leaks. Additionally, mineral buildup from hard water can affect the performance and integrity of the base.
Symptoms of a bad water filter base include:
- Water leaks around the filter area
- Poor water flow or reduced water pressure
- Filter not fitting securely or falling out
- Unusual tastes or odors in the filtered water
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Leaking
-
Not dispensing water
See more...
Do-It-Yourself Stories from Customers like You
Frigidaire puresource2 water filter kept popping out Larry G. • Tacoma , WA • October 18, 2014
Turned off water behind the fridge. Unscrewed housing that covered water lines behind the filter base with a 1/4" socket. Pulled out the water hoses by pulling forward on the blue ring holding the hose while pulling the hose backward. Unscrewed the two screws below the filter base. Used the 1/4" socket to remove four additional 1/4" nuts holding the front housing until it partially dropped. I kept the housing propped on a jar. Unscrewed two additional screws holding the filter release rod in...
Read more
More
$92.95
- Compare At:
-
$110.61
- You Save:
-
$17.66
Genuine Frigidaire part
By: Frigidaire
Part Number: 241860801
The Ice Container Assembly is an OEM replacement part for Frigidaire refrigerators that stores ice made by the ice maker. It includes the container, auger for ice dispensing, and other mechanisms for storage and dispensing.
A bad Ice Container Assembly can result from container cracks or damage, causing ice spills, auger wear affecting dispensing, blockages halting ice movement, and parts wear hindering efficient ice dispensing.
Symptoms of a malfunctioning Ice Container Assembly include:
- Inability to dispense ice.
- Ice clumping together, indicating a possible air leak or temperature issue within the container.
- Unusual noises during operation, which could point to a mechanical problem with the auger or other components.
- Leakage or water accumulation, suggesting a crack or damage to the container.
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice container not dispensing ice; drive blade has come off Randy D. • San Antonio , TX • August 11, 2015
The drive blade has come off of the drum and the auger. When I try to dispense ice and the auger rotates, the drive blade does not rotate with it. Hence, the drive blade was not pushing ice into the drum (and into the ice crusher housing and dispense chute). Apparently, the hole of the drive blade was no longer "biting" the auger so that it will rotate with it. I did not know how to re-attach the drive blade back to the auger (short of welding it). So I ordered the Ice Container Assy. Took out...
Read more
More
$174.58
- Compare At:
-
$206.00
- You Save:
-
$31.42
Genuine Frigidaire part
By: Frigidaire
Part Number: 241688601
The Ice Chute Door Insulation is an OEM replacement part for Frigidaire refrigerators. It is installed on the ice chute door to prevent warm air infiltration and moisture buildup around the ice dispenser.
Causes may include compression or cracking of insulating foam/material from normal use stress. Spills exposing it to liquid are also damaging.
Symptoms of defective insulation consist of:
- Ice accumulating within the chute cover area
- Condensation visible on exterior chute surfaces
- Inefficient icemaker performance due to altered temperatures
This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice maker door not sealing causing frost buildup and leaking Richard B. • Shoreline , WA • October 11, 2016
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time.
Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical...
Read more
More
$51.75
- Compare At:
-
$62.10
- You Save:
-
$10.35
Genuine Frigidaire part
By: Frigidaire
Part Number: 215005101
This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.
- Fastens the designated component to the appliance cabinet or assembly
- Helps reduce looseness, vibration, and rattling
- Replaces missing, corroded, or stripped screws
- Supports proper alignment of panels, trim, and brackets
What's included: One screw Install notes:
- Disconnect power and, if applicable, shut off gas/water before servicing
- Match the screw to the original location; retain any reusable clips or washers
- Start threads by hand to avoid cross-threading; use the correct driver
- Tighten snugly—do not overtighten into plastic or thin metal
Do-It-Yourself Stories from Customers like You
Deli/meat pan installment Kevin G. • Fort Lauderdale , FL • March 02, 2016
I had purchased a model refrigerator that did not come with the deli/meat pan, and I was told by the manufacturer's customer service department that my purchased model was not designed with the item.
I made comparisons with other models that had the deli/meat pan and found that the shelving alignments were the same so I decided to improvise and install the deli/meat pan.
The manufacturer's customer service department did assist me with obtaining the appropriate part numbers and I placed the...
Read more
More
$21.95
- Compare At:
-
$26.34
- You Save:
-
$4.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 218252201
The Screw is an OEM replacement part for Frigidaire refrigerators. This small but essential component is used to secure various parts of the appliance, such as panels, brackets, or internal fixtures, ensuring the refrigerator's structural integrity and proper operation.
Over time, screws may become loose, stripped, or corroded due to regular use, environmental factors, or maintenance work. A damaged or missing screw can lead to misaligned parts or reduced stability of the appliance.
Symptoms of a bad or missing screw include:
- Loose or wobbly components within the refrigerator
- Panels or fixtures coming apart or misaligned
- Difficulty securing parts during maintenance or repair
- Rattling or unusual noises during operation
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Door racks/door stop broken. Jennifer S. • Lincoln , NE • December 13, 2020
I wasn’t sure where I could get parts for the fridge, Google brought me here. Super easy to look up model #’s and locate parts by type/location with the appliance map. I needed to change the racks and the doorstop. The racks were super simple. I would have succeeded with the doorstop too, but the holes at the bottom are stripped and the doorstop wasn’t secured correctly in the first place. So that’s frustrating, but appliance parts pros were easy to use, parts came quickly and The video from...
Read more
More
$11.45
- Compare At:
-
$12.84
- You Save:
-
$1.39
Genuine Frigidaire part
By: Frigidaire
Part Number: 241682303
The Ice Dispenser Actuator is an OEM replacement part specific to Frigidaire refrigerators. It is the electronic component responsible for actuating and operating the ice and water dispenser.
Symptoms of a bad ice dispenser actuator include:
- The ice or water dispenser not working or dispensing intermittently
- No signal or responsiveness from the dispenser button
- Ice cubes were dispensed incorrectly in large clumps instead of individually
Causes of failure can be related to wear and tear of moving parts over time, failures in the small electronic circuit board, or damage to wiring affecting power delivery to the actuator motor.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Ice dispenser broken; plastic arm that trips micro switch had broken off & hinge point broken Armand B. • Monroe , LA • February 23, 2015
Removed complete housing, including the actuator to dispense ice; plastic cemented, with reinforcing strips of cloth to reinforce repair on left hand side of assembly. Then installed new actuator part from Appliance Parts, plugged in wires, then had to plastic cement the pack on back of the new actuator back on, as it had come loose. Reassembled all, and finally managed to get
the water discharge tube back through the hole, than replaced the flat strip connector & replaced
all screws. Works...
Read more
More
$145.95
- Compare At:
-
$172.22
- You Save:
-
$26.27
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304496561
The Freezer Temperature Control is an OEM part for Frigidaire refrigerators. This part regulates the temperature inside the freezer compartment, maintaining the desired cooling level to keep your frozen foods fresh and preventing freezer burn.
Causes of a bad Freezer Temperature Control can include electrical issues, sensor failures, or mechanical wear over time.
Symptoms of a faulty Freezer Temperature Control include:
- Freezer temperature fluctuations or inability to maintain a consistent cool temperature
- Freezer becoming too warm or not cold enough
- Frost buildup or excessive ice formation inside the freezer
- The refrigerator running constantly or cycling on and off frequently
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
My refrigerator items were freezing Mayilet F. • Hialeah , FL • February 24, 2020
I ordered a freezer temperature control. I ordered from you because parts are certified. Last thing I wanted was to go through the replacement process with a part that didn’t work. I’m not a handy person by nature, and I have zero common sense. I watched the awesome instructional video that you provided with my order several times. Before receiving or even opening the package, I felt that I knew what to expect because I watched the video so many times. Before beginning, I made sure I had as...
Read more
More
$100.95
- Compare At:
-
$120.13
- You Save:
-
$19.18
Genuine Frigidaire part
By: Frigidaire
Part Number: 241537104
The Fresh Food Temperature Control is an OEM part for Frigidaire refrigerators. This part regulates and maintains the temperature within the fresh food compartment, ensuring that your food stays at the desired temperature for optimal freshness.
Causes of a bad Fresh Food Temperature Control can include wear and tear over time, electrical faults, or damage to the control knob or internal components.
Symptoms of a bad Fresh Food Temperature Control include:
- Inconsistent temperature within the fresh food compartment
- Food spoiling more quickly than usual
- The refrigerator running continuously or not running at all
- Difficulty adjusting the temperature setting
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Freezer was cold but refrigerator was warm John H. • Chehalis , WA • July 13, 2015
This issue was with a refrigerator that we acquired with a house we bought. The freezer was cold, making ice well, overall doing great. The refrigerator was not cold however. I had this issue with our own refrigerator in the past, and it was related to the defrost fan not working and the coils freezing up. However this refrigerator's coils had no ice buildup. Doing some searching on the internet I was able to narrow it down to the damper between the freezer and refrigerator not opening...
Read more
More
$132.29
- Compare At:
-
$157.43
- You Save:
-
$25.14
Genuine Frigidaire part
By: Frigidaire
Part Number: 240328404
The Upper Hinge Bearing is an OEM replacement part for Frigidaire refrigerators. It facilitates the smooth and quiet opening and closing. By reducing friction at the hinge point, it ensures the door operates seamlessly and is less prone to wear over time.
Causes of a faulty upper hinge bearing include repetitive stress and wear from continuous door opening and closing over time. Exposure to moisture may accelerate bearing degradation.
Symptoms of a bad upper hinge bearing include:
- Squeaking or grinding noises emitted from the hinge area
- Difficult door operation requiring increased lifting force
- Potential misalignment compromising door seal integrity
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Refrigerator door self close stopped working Todd B. • Glen Ellyn , IL • October 20, 2015
Went to site at 4pm central, found part, watched repair video, ordered part, part arrived NEXT MORNING, replaced part, door works perfectly. Total time for web research, ordering AND repair: Less than 30 minutes. Total cost with delivery: $21.66.
Door works just like new. It doesn't get any better than this folks.
Read more
More
$17.25
- Compare At:
-
$20.70
- You Save:
-
$3.45
Genuine Frigidaire part
By: Frigidaire
Part Number: 241688901
This torsion spring mounts in the dispenser to return the ice chute door/flapper to the closed position after dispensing. Replacing a weak or broken spring helps stop warm air leaks, frost, and ice clumping in the chute.
- Provides the closing force for the dispenser ice door
- Helps seal the ice chute to reduce frost and moisture intrusion
- Typical symptoms: ice door won't close fully, frost/ice buildup around the chute, cubes dropping after dispensing, or air leakage at the dispenser
- Replace if the spring is broken, deformed, or has lost tension
What's included: 1 torsion spring Install notes:
- Disconnect power before servicing; shut off water if working near the dispenser area
- Remove dispenser trim/bezel and control panel to access the ice door assembly; support wiring harnesses
- Note spring orientation and preload before removal; install the new spring on the same hinge posts in the same direction
- Manually cycle the flapper to ensure smooth return and a full seal before reassembly
Do-It-Yourself Stories from Customers like You
Ice maker door not sealing causing frost buildup and leaking Richard B. • Shoreline , WA • October 11, 2016
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time.
Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical...
Read more
More
$15.95
- Compare At:
-
$18.98
- You Save:
-
$3.03
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303305677
Includes service line.
Do-It-Yourself Stories from Customers like You
Freezer would not go below 32°f. James L. • Port Saint Lucie , FL • February 23, 2018
Had a friend who is an appliance repair tech. Replace the evaporator, the heater coil, and the filter/drier. Parts were soldered together and the compressor was put under vacuum. Then, charged with 5 oz. of refrigerant. The freezer works great now!
Read more
More
$22.95
- Compare At:
-
$27.31
- You Save:
-
$4.36
Genuine Frigidaire part
By: Frigidaire
Part Number: 241600902
Note: Damper Control w/ two switches, if you need a Damper Control with one switch, order part# {AP5688411}
Do-It-Yourself Stories from Customers like You
Made loud rattling noise and vibrated near part that was going bad Stephen B. • Mesa , AZ • May 24, 2014
Replaced the damper control after looking at the exploded drawings privided by this website and determing that the bad part was the damper control. I have never done a repair on an appliance before but this website made it seem doable.
Read more
More
$165.36
- Compare At:
-
$196.78
- You Save:
-
$31.42
Genuine Frigidaire part
By: Frigidaire
Part Number: 241685001
This augur nut is a genuine Frigidaire part, sold individually. It can be used as a replacement part for a refrigerator. This augur nut serves as a fastening component for the augur of an ice maker located inside the refrigerator; this nut maintains the placement of components within the ice maker so that ice and water can be dispensed properly and efficiently.An augur nut might have to be replaced if it is lost, misplaced, or stripped to the point that it is rendered ineffective. The primary sign of an augur nut that is missing or stripped is an ice maker that cannot dispense ice. If this is occurring, the infrastructure of the ice maker should be inspected, and if it is revealed that the augur nut is missing or has been stripped to the point that it cannot fasten its components, this genuine OEM replacement part should be ordered.This is an OEM part sourced directly from the manufacturer. It is sold individually. This augur nut is compatible with the following appliance brands: Frigidaire, Kenmore, Electrolux, Westinghouse, Tappan, Crosley, Gibson, and Universal.
Do-It-Yourself Stories from Customers like You
Refrigerator would dispense ice cubes however would no longer provide crushed ice Thomas R. • Washington , MO • October 16, 2017
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 240324411
The Kickplate Grille is an OEM part for Frigidaire refrigerators. It is positioned at the bottom of the refrigerator, serving both aesthetic and functional purposes by covering the machinery and components located there, while also facilitating proper airflow to these parts to prevent overheating.
Causes of a bad Kickplate Grille can include physical damage such as cracks, warping, or breakage, often resulting from accidental impacts or general wear and tear.
Symptoms of a bad Kickplate Grille include:
- Noticeable gaps or looseness in the grille's fit against the refrigerator frame
- Increased operational noise due to insufficient cooling of internal components
- Visual unappeal due to damage or discoloration
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Needed a new kick plate for refrigerator Mary B. • Oviedo , FL • November 05, 2016
Snapped it on.
Read more
More
$55.66
- Compare At:
-
$66.79
- You Save:
-
$11.13
Genuine Frigidaire part
By: Frigidaire
Part Number: 241726501
The Ice Auger Drive Bar is an OEM replacement part for Frigidaire refrigerators. It plays an important role in allowing the icemaker assembly to function properly by transmitting rotational force from the motor to the ice auger. Without a properly functioning drive bar, ice cubes may not be dispensed as needed. Please Note: The nut is no longer separate. It is now part of this drive bar.
Causes of a bad ice auger drive bar can include wear and tear from frequent use, damage due to heavy ice loads, or corrosion from moisture exposure. A malfunctioning drive bar can result in inefficient ice dispensing or complete failure of the ice dispensing mechanism.
Symptoms of a bad drive bar include:
- Ice cubes not dispensing when requested
- Noise or grinding sounds coming from the icemaker area
- Stalling or failure of the icemaker assembly to rotate fully
- Inability to harvest or eject ice from the ice molding trays
This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken ice dispenser actuator, rusty front plate, bad fridge door switch Michael A. • Garnerville , NY • August 06, 2020
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you...
Read more
More
$48.95
- Compare At:
-
$58.74
- You Save:
-
$9.79