Kenmore Refrigerator 253.61462100 (25361462100, 253 61462100) Parts

The Screw Kit is an OEM part for Frigidaire appliances. It contains various screws specifically designed to fit and secure different components of Frigidaire appliances, ensuring a tight and secure assembly. This kit is essential for both initial installations and for making repairs or replacements to existing appliances, providing the necessary hardware to maintain or restore the structural integrity of your appliance.  These screws are #10-16 x .500 inches long and can be loosened or tightened using either a Phillips-head or square-head screwdriver.

Symptoms of needing a new Screw Kit include:

• Loose components or panels on your appliance due to missing or damaged screws.
• Inability to securely fasten parts during assembly or repairs, which can lead to operational issues or safety hazards.
• Screws stripping or corroding over time, which can compromise the stability and durability of the appliance.

Causes for replacing screws can include mechanical stress that causes screws to loosen or fall out, environmental factors like moisture leading to corrosion, or accidental damage during cleaning or maintenance.

This screw kit is designed to be universally compatible with various Frigidaire models, ensuring that you have the right screws for a range of repair needs.

The Freezer Door Gasket is an OEM part for Frigidaire freezers. It is designed to create a secure seal around the perimeter of the freezer door, preventing cold air from escaping and warm air from entering. This seal is crucial for maintaining the freezer's efficiency and effectiveness in preserving food at optimal temperatures. It measures approximately 17-1/4 inches in height and 26-1/2 inches in width.

Symptoms of a bad Freezer Door Gasket include:

• Visible gaps or tears in the gasket,
• Condensation or ice buildup around the door area,
• The freezer struggling to maintain the set temperature,
• Increased energy consumption as the freezer works harder to compensate for air leaks.

Causes of gasket failure typically include normal wear and tear, exposure to extreme temperatures that can cause the material to harden and lose elasticity, or accidental damage from cleaning or use.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Rack Support is an OEM part for Frigidaire refrigerators. It is designed to support the door rack or bin, providing a secure mounting point that helps hold items in place within the refrigerator door. This support piece ensures that the door racks remain stable, allowing you to store and organize items like bottles, jars, and condiments efficiently.

Causes of a bad door rack support can include regular wear and tear from frequent use, overloading the door racks with heavy items, or accidental damage from impacts or mishandling. Over time, these factors can cause the support to crack, break, or lose its ability to hold the door rack securely.

Symptoms of a bad door rack support include:

• Door racks sagging or falling out of place
• Difficulty in fitting or securing the door racks
• Visible cracks, breaks, or damage to the support

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Rack Support is an OEM replacement part for Frigidaire refrigerators. It serves as the mounting bracket or structure that holds and secures the door racks or bins in place on the inside of the refrigerator door.

Symptoms of a need to replace the door rack support:

• Loose or wobbly door racks or bins
• Racks or bins falling off the door when opened
• Visible cracks, breaks, or damage to the support structure

Causes of a faulty door rack support can include general wear and tear over time, physical impact or mishandling, or manufacturing defects in the material or construction.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models.

The Hinge Bearing is an OEM part for Frigidaire refrigerators. It plays a critical role in the smooth operation of the refrigerator door by providing a pivot point for the hinge. This small component helps to ensure that the door opens and closes smoothly and seals properly, which is essential for maintaining the refrigerator's internal temperature and energy efficiency.

Symptoms of a bad Hinge Bearing include:

• Difficulty in opening or closing the refrigerator door.
• Squeaking or grinding noises when the door moves.
• The door hanging unevenly or not sealing correctly, potentially leading to temperature fluctuations inside the fridge.

Causes of a bad hinge bearing can include wear and tear from the frequent use of the refrigerator door, accumulation of dirt or grime that impedes smooth movement, or degradation of the material over time due to environmental factors such as moisture.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Door Hinge Washer is an OEM part for Frigidaire refrigerators. The washer acts as a protective barrier that reduces friction and wear on the hinge and frame, facilitating a quieter operation and extending the lifespan of the door mechanism.

Over time, hinge washers can become worn or damaged due to the constant opening and closing of the refrigerator door. 

Symptoms of a bad Door Hinge Washer include:

• The refrigerator door is difficult to open or close
• Squeaking or grinding noises when the door is moved
• Looseness or sagging of the door, indicating misalignment
• Excessive wear on the hinge or the area of the frame where the hinge is attached

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Handle Mounting Block is an OEM part for Frigidaire refrigerators. This component anchors the refrigerator door handle assembly while also reinforcing the door structure.

Causes of a bad mounting block can include cracks developing from repeated opening/closing stresses, broken fasteners loosening its installation, or residual damage during door replacement or repair attempts.

Symptoms of a bad handle mounting block include:

• Loose, sagging or misaligned door handles
• Doors difficult to open or not staying securely closed/latched
• Noisy rattling coming from the door handle area
• Cracks or breaks visible in the mounting plastic

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Rear Shelf Trim is an OEM replacement part for Frigidaire side-by-side refrigerators. Located at the rear of the top shelf inside the refrigerator compartment, the trim piece defines the edge and provides a finished appearance. The trim measures approximately 22”.

Symptoms of a bad rear shelf trim can include:

• Cracks, chips, or scratches compromising its preserved shelf edge
• Discoloration, fading, or peeling ruining its matching polished finish  
• Sharp corners or splinters posing a potential pinch risk to users

Causes may be due to normal wear from cleaning agents, repeated drying cycles over time, or impacts stressing the trim's fragile plastic surface. 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore side-by-side models.

The Front Shelf Trim is an OEM replacement part for Frigidaire refrigerators. Contained within the fresh food compartment, it secures the upper glass shelf and frames the front opening.

Causes relate to cracking or breaking of the brittle plastic over continued use, exposure to sudden impacts, or stresses from excessive shelf loading.

Symptoms of a bad trim include:

• Gaps appearing along the front cover leaving the shelf unstable
• Crackling or popping noises from inadequate support of shelf weight
• Difficulty removing or replacing the shelf track for cleaning

It is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

Specs: 10-16 X 0.500

The Glass Shelf is an OEM part for Frigidaire refrigerators. It is a sturdy and durable shelf designed to provide ample storage space within the refrigerator compartment.

Symptoms of a bad glass shelf include:

• Cracks or chips in the glass surface
• The shelf becoming loose or unstable in its mounting
• Difficulty in sliding the shelf in and out smoothly
• Stains or discoloration that cannot be cleaned

Causes of a faulty glass shelf can include accidental impact or dropping, excessive weight or pressure on the shelf, or general wear and tear over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models. 

The Cover is an OEM part for Frigidaire refrigerators. This cover serves to protect and conceal various internal components of the refrigerator, ensuring they are shielded from dust, debris, and potential damage. The cover measures approximately 25 x 19 inches.

Causes of a bad cover can include wear and tear from regular use, accidental damage from overloading the refrigerator, or brittleness and cracking due to temperature fluctuations. When the cover is damaged, it can expose internal components to potential harm and affect the overall efficiency of the refrigerator.

Symptoms of a bad Cover include:

• Visible cracks or breaks in the cover
• Loose or missing sections
• Difficulty in fitting the cover properly in its place
• Increased accumulation of dust or debris inside the refrigerator

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This replacement screw secures panels, brackets, and other components in your appliance. Replace missing or stripped hardware to restore a tight, rattle-free fit and keep assemblies aligned the way the manufacturer intended.

• Fastens the designated component to the appliance cabinet or assembly
• Helps reduce looseness, vibration, and rattling
• Replaces missing, corroded, or stripped screws
• Supports proper alignment of panels, trim, and brackets

• Disconnect power and, if applicable, shut off gas/water before servicing
• Match the screw to the original location; retain any reusable clips or washers
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly—do not overtighten into plastic or thin metal

The Lower Hinge Pin is an OEM replacement part for Frigidaire refrigerators. It serves as a pivot point to properly hang the refrigerator doors in place. This hinge pin supports the stable mounting of doors while allowing for smooth opening and closing. 

Causes of a bad lower hinge pin can include wear from extended use, damage due to excess weight loads, or corrosion interfering with motion.

Symptoms of a bad lower hinge pin include:

• Doors not sitting securely when closed or hanging loosely  
• Difficulty smoothly opening or closing the refrigerator door
• Noises or squeaking emanating from door hinge areas
• Gaps appearing around door seals

This Frigidaire refrigerator part is compatible with models by Electrolux, Gibson, Kelvinator, and some Kenmore.

The Screw is an OEM replacement part for Frigidaire refrigerators. This small but essential component is used to secure various parts of the appliance, such as panels, brackets, or internal fixtures, ensuring the refrigerator's structural integrity and proper operation.

Over time, screws may become loose, stripped, or corroded due to regular use, environmental factors, or maintenance work. A damaged or missing screw can lead to misaligned parts or reduced stability of the appliance.

Symptoms of a bad or missing screw include:

• Loose or wobbly components within the refrigerator
• Panels or fixtures coming apart or misaligned
• Difficulty securing parts during maintenance or repair
• Rattling or unusual noises during operation

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This refrigerator door handle restores a secure, comfortable grip for opening and closing the door. Replace a cracked, loose, or broken handle to refresh your appliance's look and ensure proper leverage with each use.

• Attaches to the door to provide a firm handhold
• Helps ensure smooth opening/closing by providing proper leverage
• Replace if the handle is cracked, broken, loose, or missing
• Wobbling or difficulty gripping the door are common signs it needs replacement

• Unplug the refrigerator before beginning any repair
• Remove the old handle's mounting screws; retain screws and any decorative caps for reuse
• Align the new handle, start all screws by hand, then tighten evenly—do not overtighten
• The door opens/closes smoothly and the gasket seals properly after installation