Kenmore Range 363.9378880 (3639378880, 363 9378880) Parts
Genuine Ge part
By: Ge
Part Number: WB44X5082
The Oven Bake Element is an OEM replacement part for GE ovens. It is a critical component responsible for generating the heat necessary for baking and cooking food in the oven cavity. Measuring 18 ¼ inches wide and 14 ½ inches deep to the mounting flange. It has an element extension of approximately 2 1/4 inches past the bracket to the terminals. This element is rated at 220 volts and 2300 watts.
Causes of needing to replace the bake element can include normal wear over time, electrical malfunctions, or physical damage from impact or excessive temperature fluctuations.
Symptoms of a faulty oven bake element include:
- Uneven baking or hot/cold spots within the oven
- The oven not heating up to the desired temperature
- Visible signs of damage or burnout on the bake element itself
- Unusual smells or burning odors coming from the oven
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore oven models, ensuring a perfect fit and reliable heat generation for your specific appliance.
This part fixes the following symptoms
-
Little to no heat when baking
-
Oven is too hot
-
Oven not heating evenly
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
The baking element on our 28 year old oven decided to quit on new year's eve while preheating we heard a loud crackling pop which was the element shorting out it bubbled and started smoking Cynthia B. • Waukesha , WI • January 06, 2015
Of course, these things always seem to happen on a holiday! Luckily we were not having guests for dinner - so quickly changed our eating plans for the evening. I went directly online and Googled "Bake elements for GE ovens". At first I did not think I would have luck finding this part because of the oven's age. AppliancePartsPros.com was one of the service dealers listed first and catered specifically to GE appliances and parts. So, I typed in the Model number and low and behold, a screen...
Read more
More
$49.95
- Compare At:
-
$59.44
- You Save:
-
$9.49
Genuine Ge part
By: Ge
Part Number: WB44X173
The Broil Element is an OEM part for GE ovens. It is designed to provide the high heat necessary for broiling food, such as meats and vegetables, allowing for a quick cooking process that seals in flavors and creates a deliciously crispy exterior.
Causes of a bad Broil Element can include failure due to internal coil damage, burnout from excessive use, or electrical issues such as short circuits or loose connections that prevent it from heating.
Symptoms of a bad Broil Element include:
- The oven not heating up to the set broil temperature.
- Uneven cooking or browning of food.
- No visible glow from the element during operation.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
This part fixes the following symptoms
-
Little to no heat when broiling
-
Oven not heating evenly
-
Won't start
-
Element will not heat
See more...
Do-It-Yourself Stories from Customers like You
Broiler element burnt out on very old oven Deloris B. • Spokane , WA • November 23, 2015
I cannot not sing the praises of this company & their helpful & fast service. I am going to post the online site address w/my praises on my facebook page for my friends that live on ranches many miles from appliance repair shops & towns.
The Oven in our house is for sure over 20 yrs old it was in this home when we bought it, the home is 33 yrs old & the Oven is a Wall Oven, there is not room for a standard Oven in this Kitchen. The Oven itself still looks very nice. About 8 yrs ago or more...
Read more
More
$28.23
- Compare At:
-
$61.01
- You Save:
-
$32.78
Genuine Ge part
By: Ge
Part Number: WB30M2
The 8 Inch Large Surface Element is an OEM part for GE ranges and cooktops. This heating element is used on the cooktop to provide a consistent heat source for cooking. It fits into the designated spot on the stove and connects to the electrical system, allowing users to control the temperature for various cooking needs.
Causes of a bad surface element can include wear and tear from frequent use, electrical malfunctions, or damage from spills and food debris. Overheating or accidental impacts can also impair its functionality.
Symptoms of a bad 8 Inch Large Surface Element include:
- The element not heating up
- Uneven heating or hot spots on the element
- Sparks or electrical noises when the element is in use
- Visible damage or burns on the element
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015
Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale.
Read more
More
$51.95
- Compare At:
-
$77.98
- You Save:
-
$26.03
Genuine Ge part
By: Ge
Part Number: WB30M1
The 6-Inch Small Surface Element is an OEM part for GE cooktops and ranges. It is designed to provide consistent and reliable heat for cooking on the stovetop. This heating element fits into the designated slot on the cooktop and is used for preparing smaller dishes or for simmering.
You should replace the surface element if it becomes faulty. Causes of a bad surface element can include wear and tear from regular use, electrical issues, or damage from overheating. A malfunctioning surface element can lead to uneven cooking, insufficient heat, or the element not heating up at all.
Symptoms of a bad 6-inch small surface element include:
- The element not heating up or only heating intermittently
- Visible damage such as burn marks or deformation
- Uneven heating or hotspots on cookware
- The element not fitting securely into its slot
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Matching 8-inch surface element - WB30M2; terminal block - WB17X5113
Do-It-Yourself Stories from Customers like You
Old and scarred burners and pans Kirk W. • Indianapolis , IN • March 22, 2015
Burners were an exact match for the originals and the pans fit perfectly. Vastly improved the appearance of an old cook top and allowed us to to not have to replace it before our home goes up for sale.
Read more
More
$39.63
- Compare At:
-
$61.80
- You Save:
-
$22.17
Genuine Ge part
By: Ge
Part Number: WB21X36771
The Infinite Heat Switch Kit is an OEM part for GE ranges and cooktops. This kit is essential for controlling the temperature of the burners on your range or cooktop, allowing you to adjust the heat level from low to high.
Causes of damage to the infinite heat switch can include normal wear and tear from frequent use, electrical issues such as short circuits or power surges, and physical damage from cleaning or impact.
Symptoms of a bad Infinite Heat Switch include:
- Burners not heating to the desired temperature, either staying too hot or not getting hot enough.
- The burner not turning on at all, indicating a possible failure in the switch's electrical contacts or circuit.
- Inconsistent cooking temperatures, where the burner cycles on and off too frequently or not often enough, affecting cooking performance.
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Had previously replaced one burner control because the burner indicator light stayed on William A. • Dodge Center , MN • July 13, 2015
I replaced all 3 remaining burner controls because they were all original (mid 1970s GE electric range w/coil burners), and one of the controls occasionally made arcing sounds when cycling the burner on and off. If a control is making odd noises - more than just a quiet metallic clicking
as it cycles - it should be replaced.
I'm assuming you have experience with the tools needed and can do simple mechanical assembly or disassembly, but have not previously worked with electrical equipment of...
Read more
More
$49.68
- Compare At:
-
$59.62
- You Save:
-
$9.94
Genuine Ge part
By: Ge
Part Number: WB17X5113
The Surface Unit Receptacle is an OEM part for GE cooktops and ranges. It is designed to hold and connect the surface heating element to the cooktop’s electrical system, providing a secure and reliable connection for the element to receive power.
Causes of a bad surface unit receptacle can include wear and tear from regular use, exposure to high temperatures, or electrical arcing. A malfunctioning receptacle can lead to improper heating element performance or electrical hazards.
Symptoms of a bad surface unit receptacle include:
- The heating element not heating up or only heating intermittently
- Visible damage or burn marks on the receptacle
- Sparks or electrical arcing when the element is in use
- The heating element feeling loose or not fitting securely in the receptacle
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
For the large 8-inch surface element order WB30M2. For the small 6-inch surface element order WB30M1.
Do-It-Yourself Stories from Customers like You
Burner on stove was intermittent and had my wife steamed and hot under the collar for a year i had already replaced all the switches on the stove using appliance parts pros Chris D. • Granby , CT • June 12, 2014
Watched the video when the part came, and 5 minutes later, our 25 year old stove is once again working like a champ.
Read more
More
$23.95
- Compare At:
-
$40.26
- You Save:
-
$16.31
Genuine Ge part
By: Ge
Part Number: WB36X192
The Oven Light Lens is an OEM part for GE ovens, designed to protect and cover the oven light bulb. It allows for a clear view of the oven's interior, making it easier to monitor the cooking progress without opening the oven door, thus maintaining a consistent temperature.
Over time, the oven light lens can become discolored or cloudy from exposure to high temperatures, grease, and food splatters, which can diminish its effectiveness. Additionally, accidental bumps or cleaning can lead to cracks or breaks in the lens.
Symptoms of a bad Oven Light Lens include:
- Diminished light output, making it hard to see inside the oven
- Cracks or damage to the lens itself
- Discoloration or cloudiness that cannot be cleaned off
- The lens becoming loose or falling off
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Oven would not heat and oven light wouldn't work Garett N. • Lubbock , TX • May 06, 2016
Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service...
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Ge part
By: Ge
Part Number: WB48X10056
The Broiler Pan Kit is an OEM part for GE ranges. It serves as a secure platform for positioning meats, vegetables, and various foods directly beneath the broiler element, ensuring safe and efficient cooking. The pan is about 17 inches wide by 13 inches deep.
Over time, wear and tear can affect broiler pans, causing issues such as flaking or stripping of the non-stick coating and the development of small ridges or holes that permit grease to drip down.
Symptoms of bad broiler pans include:
- Grease fires caused by dripping grease contacting the heating element
- A burnt or smoky flavor transferring to foods
- Difficulty removing baked-on grease and food deposits
- Pans that are misshapen or developing small cracks
This OEM GE replacement part is also compatible with select Hotpoint, RCA, and some Kenmore ranges
Do-It-Yourself Stories from Customers like You
None Ralph W. • Brentwoo , NY • July 13, 2014
Fast delivery, great service
Read more
More
$26.95
- Compare At:
-
$32.34
- You Save:
-
$5.39
Genuine Ge part
By: Ge
Part Number: 40A15
The Light Bulb (40W) is an OEM component for GE refrigerators. As an essential task lamp, it illuminates the interior of the refrigerator and freezer compartments.
All light bulbs will eventually burn out with consistent use over many years. Vibration during compressor cycles can also potentially disrupt bulb filaments faster.
Symptoms of a burnt out refrigerator light bulb include:
- Dim or no light illuminating inside refrigerator shelves
- Shadows and dark spots making it difficult to find items
- Higher utility costs from leaving the door open to see inside
This bulb is also compatible with refrigerators from brands like Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Nothing worked except the light :) Przemyslaw B. • Wallington , NJ • September 20, 2014
I changed the motherboard - computer and also changed the motor in the freezer, because it was doing a howling sound every time it turned on. The repair technician asked for $500 for a repair and that is on top of the $230 I paid him two days before. I looked up the parts and decided to try myself and it paid off. Great instructional videos. Thanks
Read more
More
$18.95
- Compare At:
-
$22.36
- You Save:
-
$3.41
Genuine Ge part
By: Ge
Part Number: WB3X5699
The Clock Knob Kit is an OEM replacement part for GE ranges. It contains the necessary knobs to control clock and timer functions from the control panel. This 3 pack of range clock knobs is all you need to cover one timer control. Color: Black. Each knob measures about 1/2 an inch in diameter, and 1 inch deep
Symptoms of faulty knobs include:
- Knobs no longer stay securely attached to shafts
- Issues selecting timer options or adjusting clock settings
- Incorrect rotation feel or knobs difficult to turn
- Display issues arising from loose or faulty internal connections
This GE replacement kit is also compatible with Hotpoint, RCA and some Kenmore ranges for convenient cooking.
NOTE: For chrome order WB3X459.
Do-It-Yourself Stories from Customers like You
Discolored burner rings and missing oven timer/clock knobs on 30 year old ge electric stove Edward S. • Marietta , OH • December 05, 2015
Replaced above parts, easy to do, looks like a new stove. Needed to pry open knob stem slot segments very slightly to remove broken plastic from previous knobs. Spreading stem slot metal sides too much and they will break. With slots cleaned out, pinch stem sides almost together for new knobs to slide on. Customer service rep was helpful and parts delivery was next day as promised. Before contacting Appliance Parts Pros, I found their on-line customer reviews were much better than their...
Read more
More
$22.95
- Compare At:
-
$27.54
- You Save:
-
$4.59
Genuine Ge part
By: Ge
Part Number: WB08T10026
The Receptacle Push-In is an OEM replacement part for GE ranges. This component securely holds the electrical receptacle/plug in place on the back of the range. Proper functioning of the receptacle push-in allows for a stable electrical connection and safe cord positioning.
Causes of a bad receptacle push-in include normal wear over time, bending/stress on the receptacle area, or damage affecting its securing ability.
Symptoms of a bad receptacle push-in are:
- Loose or wobbly electrical plug connection
- Exposed wiring or fragile cord positioning
- Tripped breakers or recurring electrical issues
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Wire connecting from strove to light fixture sparked out Joanne C. • Hudson , FL • October 30, 2015
Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now.
Would definitely call again if I needed assistance.
Read more
More
$6.95
- Compare At:
-
$8.36
- You Save:
-
$1.41
Genuine Ge part
By: Ge
Part Number: WB2X3138
The Oven Door Gasket is an OEM replacement part for GE ranges and wall ovens. It provides a secure seal around the oven door to contain heat within the cooking cavity. The gasket is essential for efficient operation as it helps maintain optimal cooking temperatures.
Causes of a bad door gasket can include heat damage over time, warping from repeated door openings and closings, or accidental tears and ruptures.
Symptoms of a bad oven door gasket include:
- Excessive heat loss around the door area
- Inconsistent or inefficient cooking performance
- The door not sealing properly, allowing heat to escape
- Rust or corrosion on interior door parts
This OEM GE part is compatible with GE, Hotpoint, Monogram, and certain Kenmore wall oven models.
Do-It-Yourself Stories from Customers like You
Oven door gasget Herman D. • St. Helena , CA • April 11, 2016
The exact part for my oven door was out of production{old oven} and i could not find it at our local appliance parts stores or at G.E. online. But with the help from your great staff and some wait time on the phone i got a perfect gasket to replace the worn-out product i had on my oven door. i was really skeptical about finding any thing to replace these burnt out gasket and was quite surprised after a few minutes on hold your tech came up with the exact fiit . thank you and your staff very...
Read more
More
$140.95
- Compare At:
-
$169.14
- You Save:
-
$28.19
Genuine Ge part
By: Ge
Part Number: WB31X5010
Fits GE and HotPoint ranges where a ceramic terminal block is used (loop type plug-in surface elements). Color: chrome. It measures about 8 inches in diameter at its widest point at the top. Matching 8 inch drip bowl: WB31X5011. Surface elements: 6 inch WB30X218, 8 inch WB30X219. Element terminal block: WB17X5051.
Do-It-Yourself Stories from Customers like You
We were revamping a 1970's era hotpoint range Beth A. • Niantic , CT • June 18, 2016
We needed replacement parts to make the warn out, old drip pans and rings look bright, shining and new again as there is nothing wrong with electric range other than ill fitting drip pans and rings. But not any more, it looks bright and updated!!
The representative was very patient and knowledgeable about how to find the serial and model numbers as she helped us get the exact parts we needed. The parts arrived within days of the order and they fit our old stove perfectly! Now the ol'girl...
Read more
More
$11.52
- Compare At:
-
$17.72
- You Save:
-
$6.20
Genuine Ge part
By: Ge
Part Number: WB31X5011
Fits GE and HotPoint ranges where a ceramic terminal block is used (loop type plug-in surface elements). Color: chrome. It measures about 10 inches in diameter at its widest point at the top. Matching 6 inch drip bowl: WB31X5010. Surface elements: 6 inch WB30X218, 8 inch WB30X219. Element terminal block: WB17X5051.
Do-It-Yourself Stories from Customers like You
Terminal block broken and needed repairing Bernard B. • Hillsboro , OR • September 19, 2014
Ordered new terminal block, replaced surface element and drip pan at the same time.
Read more
More
$17.65
- Compare At:
-
$21.00
- You Save:
-
$3.35
Genuine Ge part
By: Ge
Part Number: WB1X119D
Genuine Ge part
By: Ge
Part Number: WB17X5095
The Terminal Block is an OEM part for GE electric ranges. It serves as a critical junction point where the range's wiring connects to the heating elements, ensuring proper electrical flow and operation of the oven and cooktop. This component is essential for the safe and efficient functioning of your appliance.
Causes of a bad terminal block can include overheating due to electrical surges, corrosion from prolonged exposure to heat and moisture, or physical damage from improper installation or handling.
Symptoms of a bad terminal block include:
- The oven or burners not heating properly
- Visible signs of burn marks or corrosion on the block
- Electrical arcing or sparking
- Intermittent or no power to the heating elements
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Bad wire on terminal block of electric range caused the stove to quit working 3days before thanksgiving Stephen Y. • San Antonio , TX • November 25, 2016
Replaced the power cord, bur terminal block fell apart. Ordered replacement part, and overnight shipping. Received the next day and completed repairs. Cheered up my wife, for sure.
Read more
More
$74.95
- Compare At:
-
$89.19
- You Save:
-
$14.24